Description
All Thread Rod 7/8"-9 TPI Galvanized Oiled Threaded Rod Sold by the Foot
This is a 7/8"-9 TPI (7/8 inch diameter, 9 threads per inch) fully threaded rod with a galvanized and oiled finish. It is offered in cut lengths and sold by the foot from existing stock. There is no hardness stamp on this material.
Specifications & What's Included
- Diameter: 7/8 inch (0.875")
- Thread pitch: 9 TPI (threads per inch)
- Thread form: UNC — Unified National Coarse
- Finish: Galvanized and oiled
- Hardness stamp: None present
- Sold by the foot in cut lengths
- Currently available lengths and approximate quantities (subject to change):
- 38" — Qty: 1
- 36" — Qty: 1
- 30" — Qty: 1
- 26" — Qty: 68
- Note: available lengths and quantities can change — contact us before ordering to confirm your required length is in stock
Applications
All thread rod (also called fully threaded rod, threaded bar, or stud rod) in the 7/8"-9 UNC size is a standard heavy-duty fastener used across construction, structural, and industrial applications. The 7/8" diameter and 9 TPI coarse thread pattern are commonly used for anchor bolts, hanger rod assemblies, concrete embedment, pipe and conduit supports, machinery mounting, and structural tie rods. The galvanized finish provides corrosion resistance for use in damp or outdoor environments, making it well suited for HVAC suspension systems, seismic bracing, and general construction applications where moisture exposure is a factor. The oiled surface eases threading and nut engagement during installation.
This All Thread Rod 7/8"-9 TPI galvanized and oiled threaded rod is in used condition and has been visually inspected. The rod shows typical surface patina consistent with storage, and the threads are intact with no hardness stamp present. It is being sold by the foot in the lengths listed; available lengths and quantities can change. If you need a specific length, please contact us before purchasing to confirm it is in stock. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Unbranded |
Model: |
7/8"-9 All Thread Rod |
Type: |
All Thread Rod / Fully Threaded Rod |
SKU: |
36994 |
Thread Size: |
7/8"-9 (7/8 inch diameter, 9 TPI) |
Diameter: |
7/8 inch (0.875") |
Thread Pitch: |
9 TPI (threads per inch) |
Thread Standard: |
UNC (Unified National Coarse) |
Material Finish: |
Galvanized and Oiled |
Hardness Stamp: |
None — no hardness stamp present |
Sold As: |
By the foot — cut lengths available |
Available Lengths: |
38", 36", 30", 26" (quantities vary) |
Condition: |
Used – Inspected |
Seller Notes: |
Contact us before ordering to confirm desired length is available. |
Country/Region of Manufacture: |
Unknown |
Condition Notes: |
Used 7/8"-9 TPI galvanized oiled all thread rod, visually inspected, threads intact, no hardness stamp. Sold by the foot; available lengths/quantities vary. Contact us before buying to confirm your needed length is in stock. |
