Eratron

Eratron PPS 8210 RS MF Plasma Power Supply 10KW DC 208V 3-Phase Sputtering

(No reviews yet) Write a Review
SKU:
50052
MPN:
PPS 8210 RS MF
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
480.00 LBS
Shipping:
Calculated at Checkout
  • Eratron PPS 8210 RS MF plasma power supply – front-left three-quarter view showing cabinet on casters with PS-135 label and cooling fans
  • Eratron PPS 8210 RS MF – rear view showing ventilated panel with large 3-phase industrial twist-lock receptacle and two blue coolant fittings
  • Eratron PPS 8210 RS MF nameplate label showing model number, serial number 21526, and address 590 Division Street, Campbell, California
  • Eratron PPS 8210 plasma power supply – front panel detail showing PS-135 asset label, circuit breaker, PPS 8210 Plasma Power Supply badge, and cooling fan
  • Eratron PPS 8210 RS MF – rear panel detail showing large industrial twist-lock receptacle (cap closed) with safety chain
  • Eratron PPS 8210 RS MF – close-up of 3-phase industrial twist-lock plug face showing three power pins and ground configuration
  • Eratron PPS 8210 RS MF – bottom rear view showing Eratron nameplate, multi-pin circular connector, two blue coolant port fittings, and heavy-duty casters
  • Eratron PPS 8210 RS MF – interior top view with lid open showing two large transformer/inductor cores, wiring harnesses, control board, and high-voltage warning placard
  • Eratron PPS 8210 RS MF – interior detail of dual transformer/inductor assembly with red PCB board and copper wiring
  • Eratron PPS 8210 RS MF – interior detail of power electronics section showing control components, high-voltage warning label, cooling fan, and wiring
  • Eratron PPS 8210 RS MF High Power Sputtering Plasma Power Supply Output: 10KW DC
  • Eratron PPS 8210 RS MF High Power Sputtering Plasma Power Supply Output: 10KW DC
  • Eratron PPS 8210 RS MF High Power Sputtering Plasma Power Supply Output: 10KW DC
  • Eratron PPS 8210 RS MF High Power Sputtering Plasma Power Supply Output: 10KW DC
  • Eratron PPS 8210 RS MF High Power Sputtering Plasma Power Supply Output: 10KW DC
  • Eratron PPS 8210 RS MF High Power Sputtering Plasma Power Supply Output: 10KW DC
  • Eratron PPS 8210 RS MF High Power Sputtering Plasma Power Supply Output: 10KW DC
  • Eratron PPS 8210 RS MF High Power Sputtering Plasma Power Supply Output: 10KW DC
  • Eratron PPS 8210 RS MF High Power Sputtering Plasma Power Supply Output: 10KW DC
  • Eratron PPS 8210 RS MF High Power Sputtering Plasma Power Supply Output: 10KW DC
$1,400.00
Was: $2,800.00
Current Stock: 1

Sold Out

Description

Eratron PPS 8210 RS MF Plasma Power Supply 10KW DC 208V 3-Phase Sputtering

DC magnetron sputtering power supply rated at 10 kW output. Designed for physical vapor deposition (PVD) and semiconductor thin film deposition processes requiring stable DC power delivery at multiple voltage/current configurations.

Specifications & What's Included

  • Output: 600 VDC at 22.5 A, 800 VDC at 16.9 A, or 1000 VDC at 13.5 A
  • Input: 208 VAC, 3-Phase, 60 Hz
  • Floor-standing cabinet on casters with 3-phase industrial twist-lock rear input connector
  • Unit only; no accessories included

Applications

Used in PVD coating systems for semiconductor wafer processing, optical coating, and industrial thin film deposition. Compatible with standard sputtering chamber configurations requiring multi-voltage DC supply options. Typically integrated into larger deposition systems in fabrication facilities and research environments.

Condition: Used
This Eratron PPS 8210 RS MF DC Plasma Power Supply was pulled from a working environment and has been inspected. The cabinet exterior shows general wear consistent with industrial use, including scuffing and some marks on the black painted panels. The front panel circuit breaker, cooling fans, and labeling are all intact. The rear industrial twist-lock power connector is present and undamaged. Interior photos show the transformer/inductor cores, control boards, and wiring harness all appear intact with no obvious damage or burning. The unit has not been powered up or tested at our facility. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Eratron
Model:
PPS 8210 RS MF
MPN:
PPS 8210 RS MF
SKU:
50052
Type:
DC Magnetron Sputtering Plasma Power Supply
Output Power:
10 kW DC
Output Voltage / Current 1:
600 VDC at 22.5 A
Output Voltage / Current 2:
800 VDC at 16.9 A
Output Voltage / Current 3:
1000 VDC at 13.5 A
Input Voltage:
208 VAC
Phase:
Three Phase
Input Frequency:
60 Hz
Power Requirements:
208 VAC, 3-Phase, 60 Hz
Application:
PVD Sputtering, Semiconductor Thin Film Deposition
Form Factor:
Floor-Standing Cabinet on Casters
Connector Type:
3-Phase Industrial Twist-Lock Plug (rear input)
Condition:
Used – Pulled from Working Environment
Seller Notes:
Unit only; no additional accessories observed.
Country/Region of Manufacture:
United States
Condition Notes:
Eratron PPS 8210 RS MF DC Plasma Power Supply pulled from a working environment. Inspected; exterior shows normal industrial wear. Interior components appear intact. Not powered or tested at our facility. Sold as-is from prior working use.
View AllClose

Related Products

Related Products

Eratron PPS 8210 DC Plasma Power Supply – right-side view showing two cooling fans and model label on white panel, unit on castors Eratron PPS 8210 Plasma Power Supply – rear view showing industrial 3-phase twist-lock power inlet, output ports at bottom, and Eratron nameplate with serial number
Add to Cart
Quick view

Eratron PPS 8210 2KV RS MF 10kW DC Plasma Power Supply 208V 3-Phase Castors

Eratron

$1,500.00
Was: $3,000.00
Eratron PPS 8210 2KV RS MF 10kW DC Plasma Power Supply 208V 3-Phase CastorsDC plasma power supply rated at 10 kW output. Operates from 208 VAC three-phase 60 Hz input and delivers adjustable DC...
50051
SKU:
50051
Availability:
Usually ships within 1-2 business days.
Weight:
480.00 LBS
Brand:
Eratron
Model:
PPS 8210 2KV RS MF
MPN:
PPS 8210 2KV RS MF
SKU:
50051
Type:
DC Plasma Power Supply
Condition:
Used – Pulled from Working Environment
Seller Notes:
Unit includes castors. Pulled from working environment.
Country/Region of Manufacture:
United States
Form Factor:
Freestanding Cabinet on Castors
Input Voltage:
208 VAC
Input Phase:
Three Phase (3-Phase)
Input Frequency:
60 Hz
Power Rating:
10 kW
Output Type:
DC
Output Power:
10 kW DC
Output Voltage 1:
600 VDC @ 22.5 A
Output Voltage 2:
800 VDC @ 16.9 A
Output Voltage 3:
1000 VDC @ 13.5 A
Max Output Voltage:
2 kV (2000 VDC)
Application:
DC Magnetron Sputtering / Plasma Etch / PVD
Power Connector:
Industrial 3-Phase Twist-Lock Inlet (rear)
Output Connectors:
Large-diameter coaxial-style output ports (rear)
Condition Notes:
Eratron PPS 8210 10kW DC Plasma Power Supply. Pulled from a working environment where it was in use and functional. Inspected and in good used condition. Normal industrial wear on cabinet. On castors. Please contact us with questions.
Energy Research Associates PPS 8205 MF Plasma Power Supply – right side view showing cabinet on casters with power cable Energy Research Associates PPS 8205 MF Plasma Power Supply – left-rear three-quarter view showing high-voltage warning label and output cable connections
Add to Cart
Quick view

Energy Research Associates PPS 8205 MF Slave DC Plasma Power Supply 5KW 1000V

Energy Research Associates

$1,100.00
Was: $4,500.00
Energy Research Associates PPS 8205 MF Slave DC Plasma Power Supply 5KW 1000VThe Energy Research Associates PPS 8205 MF is a high-voltage DC plasma power supply designed to operate as a slave unit...
37192
SKU:
37192
Availability:
This item requires freight shipping. Contact us for a quote or to arrange local pickup.
Weight:
304.00 LBS
Brand:
Energy Research Associates
Model:
PPS 8205 MF
MPN:
PPS 8205 MF
Type:
DC Plasma Power Supply (Slave Unit)
SKU:
37192
Input Voltage:
208 VAC
Input Phase:
Three Phase (3-PH)
Input Frequency:
60 Hz
Output Power:
5 KW DC
Output Voltage (Max):
1000 VDC
Output Current at 600V:
11.25 A
Output Current at 800V:
8.43 A
Output Current at 1000V:
6.75 A
Configuration:
Slave Unit — requires ERA PPS 8210 MF master
Compatible Master Unit:
Energy Research Associates PPS 8210 MF
Form Factor:
Floor-Standing Cabinet on Casters
Dimensions:
30" W x 14" D x 32" H
Power Connector:
4-prong twist-lock (yellow, L21-30 style)
Output Connectors:
Two blue high-current cable connectors (rear)
Cooling:
Forced air (internal fan, rear-mounted)
Application:
DC Plasma / PVD Sputtering / Semiconductor Processing
Country/Region of Manufacture:
United States
Condition:
Used – Pulled from Working Environment
Seller Notes:
Slave unit only; master PPS 8210 MF no longer available. Freight ship required.
Condition Notes:
Energy Research Associates PPS 8205 MF Slave DC Plasma Power Supply. Inspected, good condition, pulled from working environment. SLAVE unit only — master PPS 8210 MF not included and no longer available. Freight shipping required.