Description
Danpex EN-400I Winbond W89C980P 4-Port Ethernet Network Card ISA
ISA-bus Ethernet network interface card with four RJ-45 ports and one BNC connector. Supports 10BaseT and 10Base2 networking standards using the Winbond W89C980P chipset.
Specifications & What's Included
- Brand: Danpex
- Model: EN-400I (Hardware Revision D)
- Chipset: Winbond W89C980P
- Ports: 4x RJ-45, 1x BNC
- Interface: ISA
- Network Standards: 10BaseT / 10Base2
- Manufactured: Taiwan
- Card only—no software, drivers, or accessories included
Applications
This card was designed for legacy ISA-based systems requiring multiple 10Mbps Ethernet connections, commonly used in industrial control systems and telecom equipment from the 1990s–2000s. Typical applications include networked test equipment, data acquisition systems, and distributed industrial controllers. Compatible with systems supporting ISA expansion slots and legacy operating systems such as DOS, Windows 95/98, and embedded Linux distributions.
Condition: Used
This Danpex EN-400I Winbond W89C980P Ethernet network card is in good used condition. The PCB is clean and free of visible damage, corrosion, or broken components. The bracket, RJ-45 ports, and BNC connector all appear intact and undamaged. The card shows the 'FQC OK6' quality control marking, indicating it passed factory inspection. Normal light handling marks are present consistent with prior use and storage. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
This Danpex EN-400I Winbond W89C980P Ethernet network card is in good used condition. The PCB is clean and free of visible damage, corrosion, or broken components. The bracket, RJ-45 ports, and BNC connector all appear intact and undamaged. The card shows the 'FQC OK6' quality control marking, indicating it passed factory inspection. Normal light handling marks are present consistent with prior use and storage. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Danpex |
Model: |
EN-400I |
MPN: |
EN-400I |
Type: |
Ethernet Network Interface Card (NIC) |
SKU: |
8186 |
Network Chipset: |
Winbond W89C980P |
Number of Ports: |
4x RJ-45, 1x BNC |
Connector Type: |
RJ-45, BNC |
Interface: |
ISA |
Network Standard: |
10BaseT / 10Base2 |
Hardware Revision: |
Rev D |
Country/Region of Manufacture: |
Taiwan |
Form Factor: |
ISA Card |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Card only. No software, drivers, or accessories included. |
Condition Notes: |
Danpex EN-400I W89C980P Ethernet NIC in good used condition. PCB is clean with no visible damage. Bracket, RJ-45 ports, and BNC connector are intact. FQC OK6 QC mark present. Card only — no software or accessories included. |
