Danpex

Danpex

  • Danpex EN-2000T 16-bit ISA network card – angled top view showing full PCB layout with Winbond main chip, memory ICs, RJ45 port, and AUI DB15 connector on bracket Danpex EN-2000T ISA NIC – top PCB view showing Winbond W89C901P chipset label, EN-2000T silkscreen, 20F001N IC, crystal oscillator, and FCC Class A compliance marking

    Danpex EN-2000T 16-Bit ISA Network Card Winbond W89C901P RJ45 AUI NIC

    Danpex

    $23.40
    Was: $45.00
    Danpex EN-2000T 16-Bit ISA Network Card Winbond W89C901P RJ45 AUI NIC 16-bit ISA Ethernet network card for legacy desktop systems. Provides 10 Mbps connectivity via RJ45 (10BaseT) or AUI (DB15)...
    8466
    SKU:
    8466
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.95 LBS
    Brand:
    Danpex
    Model:
    EN-2000T
    MPN:
    EN-2000T
    Type:
    16-Bit ISA Ethernet Network Card (NIC)
    SKU:
    8466
    Network Chipset:
    Winbond W89C901P
    Bus Type:
    ISA (16-bit)
    Connector Type:
    RJ45 (10BaseT), AUI (DB15)
    Network Speed:
    10 Mbps
    Network Standard:
    Ethernet 10BaseT / AUI
    Form Factor:
    ISA Card / Half-Length
    Compatible With:
    ISA-slot desktop PCs, DOS/Windows 3.x/95/98 systems
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only; no drivers or accessories included.
    Country/Region of Manufacture:
    Taiwan
    Review Status:
    Auto-Approved (needs review) 2026-07-03
    Condition Notes:
    Danpex EN-2000T 16-bit ISA NIC inspected and in good used condition. PCB clean, ports intact, light shelf wear. Not tested at our facility; pulled from a working environment.
    $23.40
    Was: $45.00
  • Danpex EN-2010BT 16-bit ISA Ethernet network card — top component side showing Winbond W89C90 chipset and ISA edge connector Danpex EN-2010BT ISA NIC — solder side (PCB reverse) showing trace layout and barcode label

    Danpex EN-2010BT Winbond W89C90 16-bit ISA Network Card RJ-45 AUI Ethernet NIC

    Danpex

    $23.40
    Was: $45.00
    Danpex EN-2010BT Winbond W89C90 16-bit ISA Network Card RJ-45 AUI Ethernet NIC 16-bit ISA Ethernet network interface card featuring Winbond W89C90 chipset. Provides 10 Mbps network connectivity via...
    8453
    SKU:
    8453
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Danpex
    Model:
    EN-2010BT
    MPN:
    EN-2010BT
    Type:
    ISA Ethernet Network Interface Card (NIC)
    SKU:
    8453
    Chipset:
    Winbond W89C90
    Bus Type:
    ISA 16-bit
    Network Speed:
    10 Mbps (10BASE-T)
    Connector Type:
    RJ-45 and AUI (DB-15)
    Hardware Revision:
    Rev. CL
    Form Factor:
    ISA Expansion Card
    Compatible With:
    16-bit ISA slot PCs, DOS/Windows 3.x/9x systems
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only; no software or documentation included.
    Country/Region of Manufacture:
    Taiwan
    Review Status:
    Auto-Approved (needs review) 2026-07-03
    Condition Notes:
    Danpex EN-2010BT 16-bit ISA Ethernet NIC pulled from a working environment. PCB intact, no visible damage. Minor bracket oxidation consistent with age. Not bench-tested at our facility. Please contact us with any questions.
    $23.40
    Was: $45.00
  • Danpex EN-400I network card front view showing 4-port RJ-45 bracket, BNC connector, and Winbond W89C980P chipset on green PCB Danpex EN-400I network card PCB rear/solder side showing 'Made in Taiwan' marking and ISA edge connector

    Danpex EN-400I Winbond W89C980P PCI 4-Port RJ-45 BNC Ethernet Network Card ISA

    Danpex

    $40.00
    Was: $80.00
    Danpex EN-400I Winbond W89C980P 4-Port Ethernet Network Card ISA ISA-bus Ethernet network interface card with four RJ-45 ports and one BNC connector. Supports 10BaseT and 10Base2 networking standards...
    8186
    SKU:
    8186
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Danpex
    Model:
    EN-400I
    MPN:
    EN-400I
    Type:
    Ethernet Network Interface Card (NIC)
    SKU:
    8186
    Network Chipset:
    Winbond W89C980P
    Number of Ports:
    4x RJ-45, 1x BNC
    Connector Type:
    RJ-45, BNC
    Interface:
    ISA
    Network Standard:
    10BaseT / 10Base2
    Hardware Revision:
    Rev D
    Country/Region of Manufacture:
    Taiwan
    Form Factor:
    ISA Card
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only. No software, drivers, or accessories included.
    Condition Notes:
    Danpex EN-400I W89C980P Ethernet NIC in good used condition. PCB is clean with no visible damage. Bracket, RJ-45 ports, and BNC connector are intact. FQC OK6 QC mark present. Card only — no software or accessories included.
    $40.00
    Was: $80.00
  • Danpex EN-2200T 16-bit ISA NIC – angled top view showing Winbond W89C902P chipset and ISA edge connector Danpex EN-2200T EN-2200T Rev.8 top view showing Winbond W89C902P main IC, two Winbond W2685-70LL RAM chips, FCC Class A label, and QC OK sticker

    Danpex EN-2200T 16-Bit ISA NIC W89C902P NE2000 Compatible DOS Win95 Win98

    Danpex

    $34.00
    Was: $70.00
    Danpex EN-2200T 16-Bit ISA NIC W89C902P NE2000 Compatible DOS Win95 Win98 This is a 16-bit ISA Ethernet network interface card based on the Winbond W89C902P chipset. It provides network connectivity...
    7416
    SKU:
    7416
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    0.95 LBS
    Brand:
    Danpex
    Model:
    EN-2200T
    MPN:
    20F001N
    Secondary Model:
    W89C902P
    Type:
    16-Bit ISA Ethernet Network Card
    Network Chipset:
    Winbond W89C902P (NE2000 Compatible)
    Bus Interface:
    ISA (16-bit)
    Compatible Standards:
    NE2000
    Connector Types:
    BNC (coax), DB-25 (parallel/AUI)
    Compatible OS:
    DOS, Windows 95, Windows 98
    FCC Compliance:
    FCC Class A
    Board Revision:
    Rev. 8
    Memory ICs:
    Winbond W2685-70LL (x2)
    Country/Region of Manufacture:
    Taiwan
    Form Factor:
    Half-Length ISA Card
    SKU:
    7416
    Condition:
    Used – Inspected
    Seller Notes:
    Card only; no drivers or accessories included.
    Condition Notes:
    Danpex EN-2200T 16-bit ISA NIC inspected and in good used condition. PCB clean, no damage. Light oxidation on ISA edge connector typical for age. QC OK sticker present. Card only, no drivers included.
    $34.00
    Was: $70.00