Description
Danpex EN-2200T 16-Bit ISA NIC W89C902P NE2000 Compatible DOS Win95 Win98
This is a 16-bit ISA Ethernet network interface card based on the Winbond W89C902P chipset. It provides network connectivity for legacy computing systems via NE2000-compatible architecture.
Specifications & What's Included
- Model: EN-2200T (MPN: 20F001N)
- Chipset: Winbond W89C902P, NE2000 compatible
- Bus Interface: 16-bit ISA
- Connectors: BNC (coax) and DB-25 (AUI)
- Compatible OS: DOS, Windows 95, Windows 98
- Form Factor: Half-length ISA card
- Memory: Winbond W2685-70LL (×2)
- Card only; no drivers or accessories included
Applications
ISA NICs of this type were standard for networking retro PCs and industrial systems running DOS and early Windows. The EN-2200T supports both 10BASE2 (BNC coax) and 10BASE5/AUI connections, common in legacy network setups. It is used for restoring network functionality to vintage computing platforms and industrial control systems from the 1990s era.
Condition: Used
This Danpex EN-2200T 16-bit ISA network card has been inspected and appears to be in good used condition. The PCB is clean with no visible damage, cracked traces, or burnt components. A QC OK sticker is present on the board. There is light surface oxidation on the ISA edge connector contacts consistent with age and storage, which can be cleaned with isopropyl alcohol before installation. The bracket and port connectors show normal wear. No drivers or accessories are included. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
This Danpex EN-2200T 16-bit ISA network card has been inspected and appears to be in good used condition. The PCB is clean with no visible damage, cracked traces, or burnt components. A QC OK sticker is present on the board. There is light surface oxidation on the ISA edge connector contacts consistent with age and storage, which can be cleaned with isopropyl alcohol before installation. The bracket and port connectors show normal wear. No drivers or accessories are included. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Danpex |
Model: |
EN-2200T |
MPN: |
20F001N |
Secondary Model: |
W89C902P |
Type: |
16-Bit ISA Ethernet Network Card |
Network Chipset: |
Winbond W89C902P (NE2000 Compatible) |
Bus Interface: |
ISA (16-bit) |
Compatible Standards: |
NE2000 |
Connector Types: |
BNC (coax), DB-25 (parallel/AUI) |
Compatible OS: |
DOS, Windows 95, Windows 98 |
FCC Compliance: |
FCC Class A |
Board Revision: |
Rev. 8 |
Memory ICs: |
Winbond W2685-70LL (x2) |
Country/Region of Manufacture: |
Taiwan |
Form Factor: |
Half-Length ISA Card |
SKU: |
7416 |
Condition: |
Used – Inspected |
Seller Notes: |
Card only; no drivers or accessories included. |
Condition Notes: |
Danpex EN-2200T 16-bit ISA NIC inspected and in good used condition. PCB clean, no damage. Light oxidation on ISA edge connector typical for age. QC OK sticker present. Card only, no drivers included. |
