Unbranded

Custom Water Filtration Enclosure Advantec Filter Housing Rotameter Flowmeter

(No reviews yet) Write a Review
SKU:
49423
MPN:
Custom 30"
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
124.00 LBS
Shipping:
Calculated at Checkout
  • Custom water filtration enclosure – white painted steel cabinet with rotameter viewing window, front three-quarter view on casters
  • Water filtration enclosure – rear panel with two brass threaded inlet/outlet fittings near the bottom edge
  • Close-up of two corroded brass threaded fittings with thread sealant on the enclosure rear panel
  • Water filtration enclosure – top panel view showing scuffs, marks and mounting screws
  • Water filtration enclosure with front panel open showing rotameter, Advantec filter housing, diaphragm valve, PVC piping and a pleated filter cartridge
  • Rotameter flowmeter close-up – red scale 2-20 L/min and 0.12-1.2 m3/h with TIF logo and USE NO OIL label
  • Advantec translucent filter housing mounted with grey PVC piping inside the enclosure
  • Kubota George Fischer EPT 15 mm (1/2 inch) diaphragm valve with orange bonnet and union ends on a stainless mounting bracket
$275.00
Was: $550.00
Current Stock: 1

Sold Out

Description

Custom Water Filtration Enclosure Advantec Filter Housing Rotameter Flowmeter

This is a custom, floor-standing water filtration enclosure: a painted steel sheet-metal cabinet that houses a single-cartridge Advantec filter housing, a variable-area (rotameter) flowmeter, and a diaphragm valve, all plumbed in grey PVC. Process water enters through the rear fittings and passes through the cartridge housing, and the flow is read directly from the rotameter scale through a cutout in the side panel. Flow is throttled with the diaphragm valve. Passive cartridge filtration of this kind is a common way to protect downstream equipment from particulates in a water loop without adding pump or control electronics. This unit has no electrical components visible in the photos.

Specifications & What's Included

  • Type: custom water filtration enclosure, built from painted steel sheet metal
  • Overall dimensions: 30" L × 21.75" W × 23.25" H
  • Filter housing: Advantec translucent single-cartridge housing, mounted in the PVC line
  • Filter element: a pleated filter cartridge is visible inside the enclosure (media and micron rating not stated)
  • Flow indicator: rotameter / variable-area flowmeter with TIF logo, viewable through a window in the side panel
  • Flow scale: 2–20 L/min and 0.12–1.2 m³/h, calibrated for SP.GR. 1.0 and 1.0 cP; marked "USE NO OIL"
  • Valve: Kubota / George Fischer EPT diaphragm valve, 15 mm (1/2") with union ends, on a stainless steel mounting bracket
  • Piping: grey PVC piping, elbows and union fittings
  • Rear panel connections: two brass threaded fittings, one female swivel-nut and one male threaded, with thread sealant
  • Cabinet: removable front panel, bolted steel panels and a gray top panel
  • Mounting: four casters with adjustable leveling feet
  • Brand: Unbranded custom-built enclosure (component brands: Advantec filter housing, Kubota / George Fischer valve, TIF flowmeter)

Applications

Water filtration enclosures of this type are used to condition and meter process or cooling water in a self-contained cabinet, with no pump or controls built in. Cartridge filtration, a rotameter and a manual throttling valve make up a simple inline filter-and-flow station.

  • Industries & settings: laboratories, semiconductor and thin-film process areas, and industrial facilities that run recirculating or once-through water loops.
  • Typical applications: particulate filtration of process or cooling water ahead of sensitive equipment, with visual flow monitoring on the rotameter and manual flow setting at the diaphragm valve.
  • Compatible systems: water lines that connect through threaded brass fittings. The 15 mm (1/2") valve and the 2–20 L/min rotameter scale set the flow range this unit is built around.
Condition: Used
This custom water filtration enclosure with Advantec filter housing, rotameter flowmeter and diaphragm valve has been inspected and appears to be in good used condition. The white painted steel cabinet shows scuffs and paint chips on the outer panels and corners, with some surface rust along the panel edges, consistent with lab or industrial use. The brass inlet and outlet fittings on the rear panel show corrosion. The interior PVC plumbing, Advantec filter housing, rotameter and valve appear intact and undamaged, and a pleated filter cartridge is visible inside the cabinet. The unit sits on casters with leveling feet. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Unbranded
Model:
Custom Water Filtration Enclosure
Type:
Water Filtration Enclosure
SKU:
49423
Seller Notes:
Enclosure with Advantec filter housing, rotameter and diaphragm valve; pleated filter cartridge shown inside
Overall Dimensions:
30" L x 21.75" W x 23.25" H
Enclosure Material:
Painted steel sheet metal
Mounting:
Floor-standing on casters with leveling feet
Included Components:
Advantec filter housing, rotameter flowmeter, diaphragm valve
Filter Brand:
Advantec
Valve Type:
Diaphragm valve, Kubota / George Fischer EPT, 15 mm (1/2")
Flow Indicator:
Rotameter / variable area flowmeter
Inlet/Outlet Fittings:
Two brass threaded fittings on rear panel (female swivel, male)
Piping Material:
PVC piping and fittings
Application:
Laboratory or industrial process water filtration
Condition:
Used – Inspected and in Good Condition
Condition Notes:
Custom water filtration enclosure with Advantec filter, rotameter and valve; inspected, good used condition. Cabinet shows scuffs, paint chips and edge rust; rear brass fittings corroded. Interior plumbing appears intact.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Color:
White
Form Factor:
Floor-standing cabinet
Flow Scale:
2-20 L/min (0.12-1.2 m3/h), SP.GR. 1.0
View AllClose