Circuit Check

Circuit Check TF12000 Thermopile Laminator & Cutter RS-232 USB PCB Test System

(No reviews yet) Write a Review
SKU:
41419
MPN:
TF12000
Condition:
Used
Availability:
Usually ships within 1–2 business days.
Weight:
100.00 LBS
Shipping:
Calculated at Checkout
  • Circuit Check TF12000 Thermopile Laminator and Cutter — front-left three-quarter view showing overhead articulated arm assembly and base unit with label
  • Circuit Check TF12000 Thermopile Laminator and Cutter — rear-right three-quarter view showing articulated laminator arm raised and blue connector fixture on platen
  • Circuit Check Inc logo badge — Proudly Made in the USA emblem on unit enclosure
  • Circuit Check TF12000 model nameplate — reads TF12000 Laminator Thermopile & Cutter
  • Front panel controls — Thermopile Test ON green button, System Ready orange indicator, and System ON/OFF toggle switch
  • Rear panel interface connectors — RS-232 DB-9 port and USB Type-A port labeled Not Used
  • Rear panel power inlet — IEC C14 power connector with rocker power switch and fuse holder
  • Blue IDC/pin connector fixture detail — close-up of blue test fixture connector with gold-pin header on platen surface
  • Circuit Check TF12000 with laminator arm raised — open view showing internal platen, circuit board, and base unit controls
  • Underside of laminator platen assembly — aluminum plate with mounting pins and support structure visible with unit arm fully raised
  • Circuit Check TF12000 CCI Thermopile Laminator & Cutter - Powers ON
  • Circuit Check TF12000 CCI Thermopile Laminator & Cutter - Powers ON
  • Circuit Check TF12000 CCI Thermopile Laminator & Cutter - Powers ON
  • Circuit Check TF12000 CCI Thermopile Laminator & Cutter - Powers ON
  • Circuit Check TF12000 CCI Thermopile Laminator & Cutter - Powers ON
  • Circuit Check TF12000 CCI Thermopile Laminator & Cutter - Powers ON
  • Circuit Check TF12000 CCI Thermopile Laminator & Cutter - Powers ON
  • Circuit Check TF12000 CCI Thermopile Laminator & Cutter - Powers ON
$400.00
Was: $1,100.00
Current Stock: 1

Sold Out

Description

Circuit Check TF12000 Thermopile Laminator & Cutter RS-232 USB PCB Test System

Benchtop system for thermopile lamination and cutting operations in PCB assembly and test environments. Features RS-232 and USB connectivity with front panel controls for thermopile testing and system operation.

Specifications & What's Included

  • Model: TF12000
  • Interfaces: RS-232 (DB-9), USB Type-A
  • Front Panel: Thermopile Test ON button, System Ready indicator, System ON/OFF toggle
  • Power: IEC C14 inlet with rocker switch and fuse holder
  • Form Factor: Benchtop
  • Manufactured: United States

Applications

The TF12000 is used in electronics manufacturing for PCB thermopile assembly, lamination, and testing operations. This equipment integrates into production workflows where thermal component bonding and validation are required. The system supports automated and manual test processes through its RS-232 and USB interfaces, allowing integration with existing manufacturing control systems and data acquisition setups.

Condition: Used
This Circuit Check TF12000 Thermopile Laminator & Cutter powers on and the front panel indicators light up, including the Thermopile Test ON and System Ready lights. We were not able to test it further beyond confirming it powers on. The unit is in good cosmetic shape overall — the enclosure and articulated arm assembly are clean and intact, with no significant damage observed. The rear panel RS-232 and USB ports are present and appear undamaged. The blue test fixture connector is visible on the platen. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Circuit Check
Model:
TF12000
MPN:
TF12000
Type:
Thermopile Laminator & Cutter
SKU:
41419
Condition:
Used – Pulled from Working Environment
Seller Notes:
Powers on and lights up; further function could not be verified
Country/Region of Manufacture:
United States
Form Factor:
Benchtop
Interface Type:
RS-232, USB
Connector Type:
DB-9 (RS-232), USB Type-A
Front Panel Controls:
Thermopile Test ON button, System Ready indicator, System ON/OFF toggle
Power Connector:
IEC C14 inlet with rocker switch and fuse holder
Application:
PCB thermopile lamination and cutting, electronics manufacturing
Compatible With:
PCB / circuit board thermopile assembly and test processes
Condition Notes:
Circuit Check TF12000 Thermopile Laminator & Cutter powers on and front panel lights illuminate. Further testing was not possible. Good cosmetic condition overall. Sold as-is beyond confirmed power-on. Please contact us with any questions.
View AllClose

Related Products

Related Products

Thermonics T-2423 Precision Temperature Forcing System 220 VAC - BAD ARM - AS IS Thermonics T-2423 Precision Temperature Forcing System main console on casters with two T-ADF arm assemblies detached and lying on the floor in front
Add to Cart
Quick view

Thermonics T-2423 Precision Temperature Forcing System 220VAC GPIB RS-232

Thermonics

$1,100.00
Was: $2,200.00
Thermonics T-2423 Precision Temperature Forcing System 220VAC GPIB RS-232 Floor-standing benchtop console for semiconductor and IC thermal stress testing. Provides hot, ambient, and cold temperature...
50236
SKU:
50236
Availability:
Usually ships within 1-2 business days.
Weight:
431.00 LBS
Brand:
Thermonics
Model:
T-2423
MPN:
T-2423
Type:
Precision Temperature Forcing System
SKU:
50236
Condition:
As-Is / For Parts or Not Working
Seller Notes:
Includes T-ADF arm assembly (damaged). Sold as-is.
Country/Region of Manufacture:
United States
Form Factor:
Floor-Standing / Benchtop Console on Casters
Power Requirements:
220VAC, 15A
Interface Type:
IEEE-488 (GPIB), RS-232C
Temperature Modes:
Hot, Ambient, Cold
Refrigerant:
R-22
LN2 Input:
Yes — LN2 IN port on rear panel
Compressor Model:
MJ6226C
Max Fuse Size:
15A
Min Circuit Ampacity:
9.7A
Application / Use Case:
Semiconductor / IC Thermal Stress and Cycling Test
Arm Model:
T-ADF
Calibration Date:
11/8/2011
Control Interface:
IEEE-488 BUS (GPIB), RS-232C I/O
Status Indicators:
Heater, Fail Safe
Modes:
Cycle, Soak, Hot, Ambient, Cold, Remote, Local
Compatible With:
Thermonics T-2420 series thermal test systems
Condition Notes:
This Thermonics T-2423 Precision Temperature Forcing System was in working condition prior to being moved to our facility. During transport, the T-ADF arm assembly was damaged and is now non-functional; the unit is therefore being sold as-is for
Bay Networks 5310A Ethernet NMM Board – angled top view showing full PCB and faceplate Bay Networks 5310A Ethernet NMM Board – opposite angled top view showing underside components and sub-board
Add to Cart
Quick view

Bay Networks 5310A Ethernet NMM Board System 5000 Enterprise Switch RS-232

Bay Networks

$65.00
Was: $125.00
Bay Networks 5310A Ethernet NMM Board System 5000 Enterprise Switch RS-232The Bay Networks 5310A/SA is an Ethernet Network Management Module (NMM) board designed to install in the Bay Networks System...
14864
SKU:
14864
Availability:
Usually ships within 1-2 business days.
Weight:
8.00 LBS
Brand:
Bay Networks
Model:
5310A
MPN:
5310A/SA
Secondary Model:
5310 ENET NMM BRD
Type:
Ethernet Network Management Module (NMM) Board
SKU:
14864
Compatible With:
Bay Networks System 5000 / Enterprise 5000 Chassis
Interface Type:
Ethernet; RS-232
Connector Type:
RS-232 (DB25); Backplane edge connector
Form Factor:
Card/Module (chassis slot)
Power Requirements:
Vin: 36–60VDC; 48VDC Nominal; Iin: 2500mA Max
Power Module:
IPD SCS4805S1 (International Power Devices)
Sub-Board:
Synoptics Communications Inc. 480-277-A
Main Network Chipset:
National Semiconductor DP8390DV (NS32490DV)
Management Type:
Managed
Segment Usage Indicators:
S1–S12 (labeled on faceplate)
DCE Port:
DCE A with Stat indicator (labeled on faceplate)
Country/Region of Manufacture:
United States
Condition:
Used – Pulled from Working Environment
Seller Notes:
Board only; no chassis or cables included.
Condition Notes:
This Bay Networks 5310A Ethernet NMM Board has been visually inspected and is in good used condition. Not bench-tested at our facility; pulled from a working environment. Board only — no chassis or cables included.
PictureTel System S4000 Video Conference Processor – rear three-quarter view showing card cage, V.35 ports, and cooling fan PictureTel S4000 rear panel detail showing RS-232 and V.35 interface cards with DB-25 connectors, RCA video/audio jacks, and S-Video connectors
Add to Cart
Quick view

PictureTel System S4000 Video Conference Processor w/ Cards RS-232 V.35

PictureTel

$225.00
Was: $500.00
PictureTel System S4000 Video Conference Processor w/ Cards RS-232 V.35Desktop video conference processor from PictureTel's System 4000 line. The S4000 served as a central processing unit for...
38995
SKU:
38995
Availability:
Usually ships within 1-2 business days.
Weight:
40.00 LBS
Brand:
PictureTel
Model:
S4000
MPN:
S4000
Type:
Video Conference Processor
SKU:
38995
Condition:
As-Is / For Parts or Not Working
Seller Notes:
Includes six internal cards and Onan power supply 300-0026-01
Country/Region of Manufacture:
United States
Form Factor:
Desktop / Chassis
Power Requirements:
100-120V / 200-240V AC, 9A/7.5A, 50/60Hz
Interface Type:
RS-232, V.35
Included Card 1:
500-0104-03
Included Card 2:
500-0111-04
Included Card 3:
610-0041-03
Included Card 4:
500-0070-03
Included Card 5:
501-0165-01
Included Card 6:
501-0124-01
Power Supply:
Onan 300-0026-01
Compatible With:
PictureTel System 4000 videoconferencing system
Certifications:
UL Listed (3E3)
Condition Notes:
PictureTel System S4000 Video Conference Processor sold AS-IS for parts or repair. Not tested or guaranteed functional. Includes six internal cards and Onan power supply 300-0026-01. Please review photos and contact us with questions.