-
Kaleidescape KServer-5000 3U Rackmount Movie Music Server Up to 24TB RAID
Kaleidescape
$800.00Was: $7,000.00Kaleidescape KServer-5000 3U Rackmount Movie Music Server Up to 24TB RAID The Kaleidescape KServer-5000 is a 3U rackmount media storage server designed for dedicated home theater and commercial AV installations. It houses a multi-drive SATA bay array...53241- SKU:
- 53241
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 62.00 LBS
- Brand:
- Kaleidescape
- Model:
- KServer-5000
- MPN:
- KSERVER-5000
- SKU:
- 53241
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Unit does not power on. Sold as-is with 9 HDDs (Seagate Constellation ES) seated in chassis.
- Form Factor:
- 3U Rackmount
- Storage Capacity:
- Up to 24TB (configurable 8TB–24TB)
- Drive Bays:
- 14 drive bays visible; 9 HDDs present
- HDD Model Included:
- Seagate Constellation ES (ST1000NM0011)
- RAID Support:
- Yes — RAID protected storage
- Connectivity:
- Gigabit Ethernet, USB, RS-232 Control port
- Rear Ports:
- AC-IN (IEC), RS-232 Control, RJ-45 Ethernet, USB x2
- Power Requirements:
- AC-IN; 100-240V AC (IEC C14 inlet, Rev A PSU)
- Compatible With:
- Kaleidescape players, Kaleidescape M-Class, Cinema One
- Application:
- Home theater media storage, movie and music library
- Country of Manufacture:
- USA
- Condition Notes:
- Kaleidescape KServer-5000 media server does not power on — emitted a pop sound when plugged in. Sold as-is for parts/repair. Front hinge broken, cover cracked upper corner. 9 Seagate HDDs present, seat in SATA. No functionality guarantee.
$800.00Was: $7,000.00 -
Exlar KM60-0150-05-NF-ISC-N34-L2 Linear Actuator 2-Phase Stepper Roller Screw
Exlar
$850.00Was: $1,700.00Exlar KM60-0150-05-NF-ISC-N34-L2 Linear Actuator 2-Phase Stepper Roller Screw A NEMA 34 stepper-driven linear actuator with roller screw drive. Delivers 160 mm of travel with 5 mm screw lead and operates on 12V minimum using an external stepper driver...53240- SKU:
- 53240
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Exlar
- Model:
- KM60-0150-05-NF-ISC-N34-L2
- MPN:
- KM60-0150-05-NF-ISC-N34-L2
- Type:
- Roller Screw Linear Actuator
- SKU:
- 53240
- Series:
- KM Series
- Drive Type:
- Roller Screw
- Motor Type:
- 2-Phase Stepper
- Motor Frame Size:
- NEMA 34 (N34)
- Stroke / Travel:
- 160 mm (16 cm)
- Screw Lead:
- 5 mm
- Actuation Voltage:
- 12V minimum (stepper driver required)
- End-of-Travel Sensors:
- Turck 4685746 PNP N.C. magnetic sensors
- Sensor Configuration:
- Set for travel extremes (2 sensors included)
- Motor Connector:
- 6-pin Molex-style connector
- Output End:
- Female threaded rod end / flange mount
- Hardware Revision:
- Rev A
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Includes Turck 4685746 magnetic sensors and motor cable with 6-pin connector
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Exlar KM60-0150-05-NF-ISC-N34-L2 linear actuator tested and working. Full 160mm travel confirmed, stepper engages at 12V. Turck sensors included. Motor body has heavy rust/corrosion cosmetically. Functional.
$850.00Was: $1,700.00 -
3M UBF 510-F ETFE Ultra Barrier Solar Film Top Sheet 352mm Wide per Meter
3M
$22.00Was: $60.003M UBF 510-F ETFE Ultra Barrier Solar Film Top Sheet 352mm Wide per Meter The 3M UBF 510-F is a multi-layer ETFE (ethylene tetrafluoroethylene) barrier film designed as a front sheet / top sheet encapsulant for lightweight, flexible thin-film...53239- SKU:
- 53239
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- 3M
- Model:
- UBF 510-F
- MPN:
- UBF 510-F
- Type:
- ETFE Ultra Barrier Solar Encapsulation Film
- SKU:
- 53239
- Width:
- 352 mm
- Unit of Sale:
- Sold by the meter (1 meter per unit)
- Film Material:
- ETFE (Ethylene Tetrafluoroethylene)
- Film Function:
- Front sheet / top sheet encapsulant for flexible solar modules
- Thickness:
- 0.333 mm (13.10 mil) per ASTM D6988
- Tensile Strength:
- 175 MPa per ASTM D882
- Elongation:
- 12% per ASTM D882
- Shrinkage at 23°C (Balanced Layer):
- 0.15% per ASTM 3M
- Optical Transmission:
- >80% (Avg 400–1400 nm) per 3M test method
- Partial Discharge (Dielectric):
- >1,000V per ASTMD 719 / IEC 61730-2 MST 11
- WVTR:
- <5 x 10^-4 g/m²/day @ 23°C, 85% RH
- Low Shrinkage:
- 0.15%
- CTE:
- Low CTE
- Certifications:
- UL Certified Component (E316895)
- Application:
- Flexible thin-film CIGS solar panel manufacturing
- Compatible PV Module Type:
- Flexible thin-film PV modules
- Manufacture Year:
- 2016
- Storage Condition:
- Plastic-sealed rolls; stored in original packaging
- Original Purchaser / Source:
- Solopower (Portland, OR) and Dow Solar (San Jose, CA)
- Seller Notes:
- Sold by the meter. To order multiple meters, increase quantity at checkout.
- Country/Region of Manufacture:
- United States
- Processing Temperature:
- 100°C for ~10 min per 3M datasheet
- Condition Notes:
- 3M UBF 510-F ETFE Solar Film — new old stock, manufactured 2016. Originally purchased by Solopower or Dow Solar for CIGS panel production. Rolls remain plastic-sealed, in good usable condition. Sold by the meter.
$22.00Was: $60.00 -
EGS Electrical Group HS1F1BS 1.0 KVA Transformer 240/480 Pri 120/240 Sec NEMA 3R
Electrical Group
$150.00Was: $300.00EGS Electrical Group HS1F1BS 1.0 KVA Transformer 240/480 Pri 120/240 Sec NEMA 3R Single-phase step-down transformer rated 1.0 KVA with primary voltage of 240/480 VAC and secondary voltage of 120/240 VAC. Wall-mounted, ventilated design for...53238- SKU:
- 53238
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 45.00 LBS
- Brand:
- EGS Electrical Group
- Model:
- HS1F1BS
- MPN:
- HS1F1BS
- SKU:
- 53238
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only, no accessories. Lead wires present.
- Form Factor:
- Wall Mount
- Country of Manufacture:
- United States
- KVA Rating:
- 1.0 KVA
- Primary Voltage:
- 240/480 VAC
- Secondary Voltage:
- 120/240 VAC
- Phase:
- Single Phase (1PH)
- Frequency:
- 60 Hz
- Insulation Class:
- Class H (180°C)
- Enclosure Type:
- NEMA Type 3R Rainproof
- Enclosure Rating:
- NEMA 3R
- Cooling Type:
- Ventilated
- Transformer Type:
- Shielded General Purpose
- Wiring Configuration:
- Dual Primary, Dual Secondary
- Mounting:
- Wall Mount
- Standards Compliance:
- UL Listed (42G7), NEC 501-2(b)
- Certifications:
- UL Listed
- Hazardous Location Rating:
- Class 1, Div. 2, Areas A-D
- Indoor/Outdoor:
- Indoor / Outdoor (Type 1 and 2)
- Date Code:
- T782807R
- Condition Notes:
- EGS HS1F1BS 1.0 KVA Transformer, Used. NEMA 3R enclosure intact, light exterior wear, interior minor oxidation. Nameplate legible, lead wires present. Removed from field service, ready for use.
$150.00Was: $300.00 -
Sola 23-25-230-3 3000VA CVS Sinusoidal Constant Voltage Transformer 95-260V 60Hz
Sola
$400.00Was: $800.00Sola 23-25-230-3 3000VA CVS Sinusoidal Constant Voltage Transformer 95-260V 60Hz A ferro-resonant constant voltage transformer that stabilizes AC input voltage fluctuations and outputs regulated sinusoidal power. Rated for 3000 VA single-phase 60 Hz...53237- SKU:
- 53237
- Availability:
- This item requires palletized freight shipping due to its size and weight. Please contact us for a freight quote before purchasing, or arrange local pickup at our Ventura, California facility.
- Weight:
- 220.00 LBS
- Brand:
- Sola Electric (Sola SB)
- Model:
- 23-25-230-3
- MPN:
- 23-25-230-3
- SKU:
- 53237
- Type:
- Constant Voltage Sinusoidal (CVS) Transformer
- Power Rating:
- 3000 VA
- Input Voltage:
- 95-130V, 175-235V, or 190-260V (multi-tap)
- Output Voltage:
- 118V or 236V (configuration dependent)
- Phase:
- Single Phase
- Frequency:
- 60 Hz
- Harmonic Content:
- Less than 3% total RMS harmonic content
- Transformer Technology:
- Sinusoidal CVS (ferro-resonant, no filters)
- Form Factor:
- Freestanding / Floor Mount
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Unit only; pulled from film processing machine service
- Condition Notes:
- Sola 23-25-230-3 3000VA CVS transformer in good used condition. Pulled from film processing service. Heavy surface patina and age wear on enclosure; terminals intact. Requires palletized freight — no UPS/FedEx. Local pickup available in Ventura, CA.
$400.00Was: $800.00 -
Optical Engineering Laser Beam Dump Set Absorptive Panels Opt-Eng Lab Optics
Optical Engineering
$225.00Was: $450.00Optical Engineering Laser Beam Dump Set Absorptive Panels Opt-Eng Lab Optics Laser beam dump set designed to absorb laser energy and suppress stray light in optical laboratory environments. Features non-reflective absorptive panels mounted in rigid black...53235- SKU:
- 53235
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Optical Engineering
- Model:
- Opt-Eng Laser Beam Dump Set
- SKU:
- 53235
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes one beam dump panel and wooden carry case; missing parts — sold AS-IS
- Form Factor:
- Panel / Benchtop
- Application / Use Case:
- Laser energy absorption, stray light suppression, laser optics lab
- Panel Type:
- Absorptive, non-reflective surface
- Frame Material:
- Rigid black anodized frame
- Case Type:
- Wooden hinged carry case with foam lining
- Quantity of Panels:
- Set — see listing photos for current count
- Compatible With:
- Laser optics benches, optical labs, research setups
- Power Requirements:
- None — passive optical component
- Condition Notes:
- Optical Engineering Laser Beam Dump Set used condition. Includes wooden carry case with foam and absorptive panel(s). Case shows normal wear. Verify contents in photos before purchase.
$225.00Was: $450.00 -
CVI Laser LPFS-IR-2.00 Infrared Long Pass Filter Set 2" 4-Filter IR Optics
CVI Laser Corp.
$300.00Was: $600.00CVI Laser LPFS-IR-2.00 Infrared Long Pass Filter Set 2" 4-Filter IR Optics Set of four 2-inch diameter infrared long pass filters mounted in an original wooden storage case. These filters transmit infrared wavelengths above a specified cutoff while...53234- SKU:
- 53234
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 5.00 LBS
- Brand:
- CVI Laser Corporation
- Model:
- LPFS-IR-2.00
- MPN:
- LPFS-IR-2.00
- SKU:
- 53234
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Set of 4 IR long pass filters in original wooden case; sold as-is
- Filter Type:
- Long Pass Infrared (IR)
- Filter Diameter:
- 2.00 inch (50.8 mm)
- Number of Filters:
- 4
- Lot Numbers:
- 1200, 1300, 1400, 1500
- Spectral Range:
- Infrared (IR)
- Application:
- Spectroscopy, Imaging, Beam Control
- Form Factor:
- Individual mounted filters in wooden storage case
- Custom Order Reference:
- PO 035676, Swales & Associates
- Country of Manufacture:
- United States
- Compatible With:
- Standard 2-inch optical mounts and filter holders
- Condition Notes:
- CVI Laser LPFS-IR-2.00 used 4-filter IR set; functional with surface scratches & minor coating wear. Original CVI wood case included. Good for optical applications.
$300.00Was: $600.00 -
CVI Laser FS10-NiR-1.00 NIR Interference Filter Set 750-1000nm 1" 6 Filters
CVI Laser Corp.
$700.00Was: $1,400.00CVI Laser FS10-NiR-1.00 NIR Interference Filter Set 750-1000nm 1" 6 Filters A set of six near-infrared bandpass interference filters manufactured by CVI Laser Corporation. Each filter has a 10 nm bandwidth and 1-inch diameter, designed for use in...53233- SKU:
- 53233
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- CVI Laser Corporation
- Model:
- FS10-NiR-1.00
- MPN:
- FS10-NiR-1.00
- SKU:
- 53233
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- 6 NIR interference filters in original CVI wood case; sold as-is, filters show wear
- Form Factor:
- Optical Filter Set in Wood Storage Case
- Filter Type:
- Bandpass Interference Filter
- Spectral Range:
- 750 nm to 1000 nm
- Bandwidth (FWHM):
- 10 nm per filter
- Diameter:
- 1.00 inch (25.4 mm)
- Number of Filters:
- 6
- Filter Models Included:
- F10-750, F10-800, F10-850, F10-900, F10-950, F10-1000
- Spectral Region:
- Near-Infrared (NIR)
- Application:
- Spectroscopy, Imaging, Laser-Based Instrumentation
- Compatible With:
- Standard 1-inch optical mounts and filter holders
- Country of Manufacture:
- USA
- Coating Type:
- NIR Anti-Reflection / Interference Coating
- Storage Case:
- Original CVI Laser Corporation wood storage case included
- Condition Notes:
- Used CVI Laser FS10-NiR-1.00 NIR filter set, 6 filters 750-1000nm. Visible cosmetic wear, scratches, discoloration. Includes original wood case. Sold as-is, optical performance not verified.
$700.00Was: $1,400.00
