-
Kaleidescape KServer-5000 3U Rackmount Movie Music Server Up to 24TB RAID
Kaleidescape
$800.00Was: $7,000.00Kaleidescape KServer-5000 3U Rackmount Movie Music Server Up to 24TB RAID The Kaleidescape KServer-5000 is a 3U rackmount media storage server designed for dedicated home theater and commercial AV installations. It houses a multi-drive SATA bay array...53241- SKU:
- 53241
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 62.00 LBS
- Brand:
- Kaleidescape
- Model:
- KServer-5000
- MPN:
- KSERVER-5000
- SKU:
- 53241
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Unit does not power on. Sold as-is with 9 HDDs (Seagate Constellation ES) seated in chassis.
- Form Factor:
- 3U Rackmount
- Storage Capacity:
- Up to 24TB (configurable 8TB–24TB)
- Drive Bays:
- 14 drive bays visible; 9 HDDs present
- HDD Model Included:
- Seagate Constellation ES (ST1000NM0011)
- RAID Support:
- Yes — RAID protected storage
- Connectivity:
- Gigabit Ethernet, USB, RS-232 Control port
- Rear Ports:
- AC-IN (IEC), RS-232 Control, RJ-45 Ethernet, USB x2
- Power Requirements:
- AC-IN; 100-240V AC (IEC C14 inlet, Rev A PSU)
- Compatible With:
- Kaleidescape players, Kaleidescape M-Class, Cinema One
- Application:
- Home theater media storage, movie and music library
- Country of Manufacture:
- USA
- Condition Notes:
- This Kaleidescape KServer-5000 3U Rackmount Media Server is being sold as-is for parts or repair and does not power on. When plugged in, the unit emitted a pop sound and subsequently failed to power on — it has not functioned since.
$800.00Was: $7,000.00 -
Exlar KM60-0150-05-NF-ISC-N34-L2 Linear Actuator 2-Phase Stepper Roller Screw
Exlar
$850.00Was: $1,700.00Exlar KM60-0150-05-NF-ISC-N34-L2 Linear Actuator 2-Phase Stepper Roller Screw A NEMA 34 stepper-driven linear actuator with roller screw drive. Delivers 160 mm of travel with 5 mm screw lead and operates on 12V minimum using an external stepper driver...53240- SKU:
- 53240
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Exlar
- Model:
- KM60-0150-05-NF-ISC-N34-L2
- MPN:
- KM60-0150-05-NF-ISC-N34-L2
- Type:
- Roller Screw Linear Actuator
- SKU:
- 53240
- Series:
- KM Series
- Drive Type:
- Roller Screw
- Motor Type:
- 2-Phase Stepper
- Motor Frame Size:
- NEMA 34 (N34)
- Stroke / Travel:
- 160 mm (16 cm)
- Screw Lead:
- 5 mm
- Actuation Voltage:
- 12V minimum (stepper driver required)
- End-of-Travel Sensors:
- Turck 4685746 PNP N.C. magnetic sensors
- Sensor Configuration:
- Set for travel extremes (2 sensors included)
- Motor Connector:
- 6-pin Molex-style connector
- Output End:
- Female threaded rod end / flange mount
- Hardware Revision:
- Rev A
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Includes Turck 4685746 magnetic sensors and motor cable with 6-pin connector
- Country/Region of Manufacture:
- United States
- Condition Notes:
- This Exlar KM60-0150-05-NF-ISC-N34-L2 roller screw linear actuator has been tested and confirmed in working order. The 2-phase stepper motor actuates the roller screw drive and the unit travels the full 160 mm stroke.
$850.00Was: $1,700.00 -
3M UBF 510-F ETFE Ultra Barrier Solar Film Top Sheet 352mm Wide per Meter
3M
$22.00Was: $60.003M UBF 510-F ETFE Ultra Barrier Solar Film Top Sheet 352mm Wide per Meter The 3M UBF 510-F is a multi-layer ETFE (ethylene tetrafluoroethylene) barrier film designed as a front sheet / top sheet encapsulant for lightweight, flexible thin-film...53239- SKU:
- 53239
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- 3M
- Model:
- UBF 510-F
- MPN:
- UBF 510-F
- Type:
- ETFE Ultra Barrier Solar Encapsulation Film
- SKU:
- 53239
- Width:
- 352 mm
- Unit of Sale:
- Sold by the meter (1 meter per unit)
- Film Material:
- ETFE (Ethylene Tetrafluoroethylene)
- Film Function:
- Front sheet / top sheet encapsulant for flexible solar modules
- Thickness:
- 0.333 mm (13.10 mil) per ASTM D6988
- Tensile Strength:
- 175 MPa per ASTM D882
- Elongation:
- 12% per ASTM D882
- Shrinkage at 23°C (Balanced Layer):
- 0.15% per ASTM 3M
- Optical Transmission:
- >80% (Avg 400–1400 nm) per 3M test method
- Partial Discharge (Dielectric):
- >1,000V per ASTMD 719 / IEC 61730-2 MST 11
- WVTR:
- <5 x 10^-4 g/m²/day @ 23°C, 85% RH
- Low Shrinkage:
- 0.15%
- CTE:
- Low CTE
- Certifications:
- UL Certified Component (E316895)
- Application:
- Flexible thin-film CIGS solar panel manufacturing
- Compatible PV Module Type:
- Flexible thin-film PV modules
- Manufacture Year:
- 2016
- Storage Condition:
- Plastic-sealed rolls; stored in original packaging
- Original Purchaser / Source:
- Solopower (Portland, OR) and Dow Solar (San Jose, CA)
- Seller Notes:
- Sold by the meter. To order multiple meters, increase quantity at checkout.
- Country/Region of Manufacture:
- United States
- Processing Temperature:
- 100°C for ~10 min per 3M datasheet
- Condition Notes:
- This 3M UBF 510-F ETFE Ultra Barrier Solar Film is new old stock manufactured in 2016. The rolls were originally purchased by Solopower in Portland, Oregon or Dow Solar in San Jose, California for use in flexible CIGS solar panel manufacturing.
$22.00Was: $60.00 -
EGS Electrical Group HS1F1BS 1.0 KVA Transformer 240/480 Pri 120/240 Sec NEMA 3R
Electrical Group
$150.00Was: $300.00EGS Electrical Group HS1F1BS 1.0 KVA Transformer 240/480 Pri 120/240 Sec NEMA 3R Single-phase step-down transformer rated 1.0 KVA with primary voltage of 240/480 VAC and secondary voltage of 120/240 VAC. Wall-mounted, ventilated design for...53238- SKU:
- 53238
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 45.00 LBS
- Brand:
- EGS Electrical Group
- Model:
- HS1F1BS
- MPN:
- HS1F1BS
- SKU:
- 53238
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only, no accessories. Lead wires present.
- Form Factor:
- Wall Mount
- Country of Manufacture:
- United States
- KVA Rating:
- 1.0 KVA
- Primary Voltage:
- 240/480 VAC
- Secondary Voltage:
- 120/240 VAC
- Phase:
- Single Phase (1PH)
- Frequency:
- 60 Hz
- Insulation Class:
- Class H (180°C)
- Enclosure Type:
- NEMA Type 3R Rainproof
- Enclosure Rating:
- NEMA 3R
- Cooling Type:
- Ventilated
- Transformer Type:
- Shielded General Purpose
- Wiring Configuration:
- Dual Primary, Dual Secondary
- Mounting:
- Wall Mount
- Standards Compliance:
- UL Listed (42G7), NEC 501-2(b)
- Certifications:
- UL Listed
- Hazardous Location Rating:
- Class 1, Div. 2, Areas A-D
- Indoor/Outdoor:
- Indoor / Outdoor (Type 1 and 2)
- Date Code:
- T782807R
- Condition Notes:
- EGS Electrical Group HS1F1BS 1.0 KVA Wall Mount Transformer (240/480 Pri, 120/240 Sec, NEMA 3R) in Used condition. This unit has been inspected and shows typical wear consistent with prior field installation.
$150.00Was: $300.00 -
Sola 23-25-230-3 3000VA CVS Sinusoidal Constant Voltage Transformer 95-260V 60Hz
Sola
$400.00Was: $800.00Sola 23-25-230-3 3000VA CVS Sinusoidal Constant Voltage Transformer 95-260V 60Hz A ferro-resonant constant voltage transformer that stabilizes AC input voltage fluctuations and outputs regulated sinusoidal power. Rated for 3000 VA single-phase 60 Hz...53237- SKU:
- 53237
- Availability:
- This item requires palletized freight shipping due to its size and weight. Please contact us for a freight quote before purchasing, or arrange local pickup at our Ventura, California facility.
- Weight:
- 220.00 LBS
- Brand:
- Sola Electric (Sola SB)
- Model:
- 23-25-230-3
- MPN:
- 23-25-230-3
- SKU:
- 53237
- Type:
- Constant Voltage Sinusoidal (CVS) Transformer
- Power Rating:
- 3000 VA
- Input Voltage:
- 95-130V, 175-235V, or 190-260V (multi-tap)
- Output Voltage:
- 118V or 236V (configuration dependent)
- Phase:
- Single Phase
- Frequency:
- 60 Hz
- Harmonic Content:
- Less than 3% total RMS harmonic content
- Transformer Technology:
- Sinusoidal CVS (ferro-resonant, no filters)
- Form Factor:
- Freestanding / Floor Mount
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Unit only; pulled from film processing machine service
- Condition Notes:
- This Sola 23-25-230-3 3000VA CVS Constant Voltage Transformer is in good used condition and has been inspected at our facility. The unit was pulled from a film processing machine where it served as a clean-power source.
$400.00Was: $800.00 -
Optical Engineering Laser Beam Dump Set Absorptive Panels Opt-Eng Lab Optics
Optical Engineering
$225.00Was: $450.00Optical Engineering Laser Beam Dump Set Absorptive Panels Opt-Eng Lab Optics Laser beam dump set designed to absorb laser energy and suppress stray light in optical laboratory environments. Features non-reflective absorptive panels mounted in rigid black...53235- SKU:
- 53235
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Optical Engineering
- Model:
- Opt-Eng Laser Beam Dump Set
- SKU:
- 53235
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes one beam dump panel and wooden carry case; missing parts — sold AS-IS
- Form Factor:
- Panel / Benchtop
- Application / Use Case:
- Laser energy absorption, stray light suppression, laser optics lab
- Panel Type:
- Absorptive, non-reflective surface
- Frame Material:
- Rigid black anodized frame
- Case Type:
- Wooden hinged carry case with foam lining
- Quantity of Panels:
- Set — see listing photos for current count
- Compatible With:
- Laser optics benches, optical labs, research setups
- Power Requirements:
- None — passive optical component
- Condition Notes:
- Optical Engineering Laser Beam Dump Set Absorptive Panels in used condition. This set includes a wooden hinged carry case with foam lining and absorptive panel(s) with black frame rails.
$225.00Was: $450.00 -
CVI Laser LPFS-IR-2.00 Infrared Long Pass Filter Set 2" 4-Filter IR Optics
CVI Laser Corp.
$300.00Was: $600.00CVI Laser LPFS-IR-2.00 Infrared Long Pass Filter Set 2" 4-Filter IR Optics Set of four 2-inch diameter infrared long pass filters mounted in an original wooden storage case. These filters transmit infrared wavelengths above a specified cutoff while...53234- SKU:
- 53234
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 5.00 LBS
- Brand:
- CVI Laser Corporation
- Model:
- LPFS-IR-2.00
- MPN:
- LPFS-IR-2.00
- SKU:
- 53234
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Set of 4 IR long pass filters in original wooden case; sold as-is
- Filter Type:
- Long Pass Infrared (IR)
- Filter Diameter:
- 2.00 inch (50.8 mm)
- Number of Filters:
- 4
- Lot Numbers:
- 1200, 1300, 1400, 1500
- Spectral Range:
- Infrared (IR)
- Application:
- Spectroscopy, Imaging, Beam Control
- Form Factor:
- Individual mounted filters in wooden storage case
- Custom Order Reference:
- PO 035676, Swales & Associates
- Country of Manufacture:
- United States
- Compatible With:
- Standard 2-inch optical mounts and filter holders
- Condition Notes:
- The CVI Laser LPFS-IR-2.00 Infrared Long Pass Filter Set is a used optical component set in working condition. This four-filter set (lot numbers 1200, 1300, 1400, and 1500) shows visible wear on the optical surfaces including light scratches and
$300.00Was: $600.00 -
CVI Laser FS10-NiR-1.00 NIR Interference Filter Set 750-1000nm 1" 6 Filters
CVI Laser Corp.
$700.00Was: $1,400.00CVI Laser FS10-NiR-1.00 NIR Interference Filter Set 750-1000nm 1" 6 Filters A set of six near-infrared bandpass interference filters manufactured by CVI Laser Corporation. Each filter has a 10 nm bandwidth and 1-inch diameter, designed for use in...53233- SKU:
- 53233
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- CVI Laser Corporation
- Model:
- FS10-NiR-1.00
- MPN:
- FS10-NiR-1.00
- SKU:
- 53233
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- 6 NIR interference filters in original CVI wood case; sold as-is, filters show wear
- Form Factor:
- Optical Filter Set in Wood Storage Case
- Filter Type:
- Bandpass Interference Filter
- Spectral Range:
- 750 nm to 1000 nm
- Bandwidth (FWHM):
- 10 nm per filter
- Diameter:
- 1.00 inch (25.4 mm)
- Number of Filters:
- 6
- Filter Models Included:
- F10-750, F10-800, F10-850, F10-900, F10-950, F10-1000
- Spectral Region:
- Near-Infrared (NIR)
- Application:
- Spectroscopy, Imaging, Laser-Based Instrumentation
- Compatible With:
- Standard 1-inch optical mounts and filter holders
- Country of Manufacture:
- USA
- Coating Type:
- NIR Anti-Reflection / Interference Coating
- Storage Case:
- Original CVI Laser Corporation wood storage case included
- Condition Notes:
- CVI Laser FS10-NiR-1.00 NIR Interference Filter Set (750-1000nm, 1", 6 filters). This used set shows visible cosmetic wear including surface scratches, coating marks, and minor discoloration across multiple filter elements, consistent with
$700.00Was: $1,400.00
