Staubli Unimation

Staubli Unimation

  • Unimation 3D32488G02 Teach Pendant Assembly Rev E – full front view with attached multi-pin cable and key Unimation 3D32488G02 Teach Pendant – front panel showing REC button, mode keys (Teach, Hold, Run, Cal), and axis +/- buttons

    Unimation 3D32488G02 Teach Pendant Assy Rev E Robot Controller FSI Polaris

    Staubli Unimation

    $550.00
    Was: $1,100.00
    Unimation 3D32488G02 Teach Pendant Assy Rev E Robot Controller FSI PolarisThe Unimation 3D32488G02 is a handheld teach pendant assembly for Unimation industrial robots, used with FSI Polaris wafer...
    32518
    SKU:
    32518
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    9.00 LBS
    Brand:
    Unimation
    Model:
    3D32488G02
    MPN:
    3D32488G02
    Secondary Model:
    M376930
    Type:
    Robot Teach Pendant Assembly
    SKU:
    32518
    Revision:
    Rev E
    Compatible With:
    FSI Polaris Wafer Handling Robot
    Application:
    Semiconductor Wafer Handling
    Form Factor:
    Handheld
    Includes:
    Teach pendant with multi-pin cable and key
    Connector Type:
    Multi-pin circular connector
    Safety Feature:
    E-Stop (red mushroom button), key switch
    Operating Modes:
    Teach, Hold, Run, Cal
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Backup spare from semiconductor facility; includes cable and key
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Unimation 3D32488G02 Teach Pendant Rev E inspected and in good condition. Pulled as a backup spare from a semiconductor facility. Includes cable and key. Normal handling wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $550.00
    Was: $1,100.00
  • Staubli Unimation W.211.149.00 PCA 512KB Memory Card – front view showing green PCB with memory ICs and front panel bracket Staubli Unimation W.211.149.00 PCA Memory Card – rear/component side showing memory chip array, battery holder, and edge connector

    Staubli Unimation W.211.149.00 PCA 512KB Memory Card FSI Polaris Robot

    Staubli Unimation

    $275.00
    Was: $550.00
    Staubli Unimation W.211.149.00 PCA 512KB Memory Card FSI Polaris RobotThe Staubli Unimation W.211.149.00 is a 512KB PCA (Printed Circuit Assembly) memory card designed for use in Staubli Unimation...
    32493
    SKU:
    32493
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    Staubli Unimation
    Model:
    W.211.149.00
    MPN:
    W.211.149.00
    Secondary Model:
    W11015600
    Type:
    PCA Memory Card / Robot Controller Memory Module
    SKU:
    32493
    Memory Capacity:
    512KB
    Form Factor:
    Card/Module (VME-style card with front panel bracket)
    Compatible With:
    FSI Polaris Wafer Handling Robot
    Application:
    Semiconductor Wafer Handling / Robotic Controller
    Revision:
    REV 5 (visible on label)
    Date of Manufacture:
    1990 (per board label); date code 0295
    Country/Region of Manufacture:
    United States
    Base Address Range:
    $A00000 to $FFFFFF (jumper-selectable)
    Condition:
    Used – Inspected, Good Condition
    Seller Notes:
    Pulled from FSI Polaris robot; was a backup spare for a semiconductor company.
    Condition Notes:
    Staubli Unimation W.211.149.00 PCA 512KB Memory Card inspected and in good condition. Pulled as a backup spare from a local semiconductor company. Board and components appear intact with normal storage wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00
  • Staubli Unimation W.211.108.00 Systel Torque Prozessor Card – component side view showing populated PCB with large central processor IC and numerous DIP ICs, mounted in metal card cage faceplate Staubli Unimation W.211.108.00 Torque Prozessor Card – solder side view showing full PCB layout with two large DIP processors, edge connectors at bottom, and card cage mounting bracket

    Staubli Unimation W.211.108.00 Rev D Systel Torque Prozessor Card FSI Polaris

    Staubli Unimation

    $450.00
    Was: $900.00
    Staubli Unimation W.211.108.00 Rev D Systel Torque Prozessor Card FSI PolarisThis is a Staubli Unimation W.211.108.00 Systel Torque Prozessor Card, Revision D, designed for use in FSI Polaris wafer...
    32462
    SKU:
    32462
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    3.00 LBS
    Brand:
    Staubli Unimation
    Model:
    W.211.108.00
    MPN:
    W.211.108.00
    Secondary Model:
    W 211.108.00
    Revision:
    Rev D
    Type:
    Torque Processor Card / PCB Module
    Compatible With:
    FSI Polaris Wafer Handling System
    Application:
    Semiconductor Wafer Handling Robot Controller
    System:
    Systel
    Form Factor:
    Card / Module (VME or proprietary backplane)
    Status Indicators:
    ERR (red) and RUN (green) LEDs on front panel
    Condition:
    Used – Pulled from Working Environment
    SKU:
    32462
    Seller Notes:
    Pulled as a backup spare from a semiconductor facility; card only
    Country/Region of Manufacture:
    Switzerland
    Condition Notes:
    Staubli Unimation W.211.108.00 Rev D Systel Torque Prozessor Card inspected and in good condition. Was a backup spare at a local semiconductor company, never deployed. PCB clean, faceplate intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $450.00
    Was: $900.00
  • Staubli Unimation W.211.118.00 Rev F WEC PCA SCM III card — top-side component view showing full PCB with ICs, edge connectors, and metal card guide Staubli Unimation W.211.118.00 SCM III card — reverse angle top view showing component density and dual large edge connectors at bottom

    Staubli Unimation W.211.118.00 Rev F WEC PCA SCM III FSI Polaris Wafer Card

    Staubli Unimation

    $295.00
    Was: $600.00
    Staubli Unimation W.211.118.00 Rev F WEC PCA SCM III FSI Polaris Wafer CardThis is a Staubli Unimation W.211.118.00 Rev F printed circuit assembly (PCA) designated SCM III with WEC sub-designation,...
    32460
    SKU:
    32460
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    Staubli Unimation
    Model:
    W.211.118.00
    MPN:
    W.211.118.00
    Secondary Model:
    W 211 118 00
    SKU:
    32460
    Type:
    Printed Circuit Assembly (PCA) / Controller Card
    Hardware Revision:
    Rev F
    Module Designation:
    SCM III
    Sub-Designation:
    WEC
    Compatible With:
    FSI Polaris Wafer Handling System
    Application:
    Semiconductor Wafer Handling / Robotic Automation
    Form Factor:
    Card / Module (VME-style card cage)
    Condition:
    Used – Inspected, Former Semiconductor Facility Spare
    Seller Notes:
    Card only; former backup spare from semiconductor facility
    Country/Region of Manufacture:
    Malaysia
    Condition Notes:
    Staubli Unimation W.211.118.00 Rev F SCM III card inspected and in good condition. Former backup spare from a local semiconductor company; never installed as a replacement. Normal storage wear. Photos available.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $295.00
    Was: $600.00
  • Staubli Unimation W.211.118.30 Systel SCM III 64kB card – top component side view showing populated PCB with memory ICs and edge connectors, seated on pink anti-static foam Staubli Unimation Systel SCM III 64kB controller card – reverse angle top view showing full PCB layout with dual high-density edge connectors and array of memory and logic ICs

    Staubli Unimation W.211.118.30 Rev A Systel SCM III 64kB Card FSI Polaris Wafer

    Staubli Unimation

    $275.00
    Was: $550.00
    Staubli Unimation W.211.118.30 Rev A Systel SCM III 64kB Card FSI Polaris WaferSemiconductor controller card designed for the FSI Polaris wafer processing system. This PCB module functioned as a...
    32459
    SKU:
    32459
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    4.00 LBS
    Brand:
    Staubli Unimation
    Model:
    W.211.118.30
    MPN:
    W.211.118.30
    Secondary Model:
    SCM III
    Type:
    Semiconductor Controller Card / PCB Module
    Hardware Revision:
    Rev A
    Manufacturer:
    Systel (Staubli Unimation)
    Memory:
    64kB
    Compatible With:
    FSI Polaris Wafer Processing System
    Application:
    Semiconductor Wafer Processing
    Form Factor:
    Card / PCB Module
    Condition:
    Used – Inspected, Pulled from Working Environment
    SKU:
    32459
    Seller Notes:
    Backup spare from semiconductor facility; card only, no additional accessories.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Staubli Unimation W.211.118.30 Systel SCM III 64kB card inspected, in good condition. Former backup spare from a semiconductor facility. Normal storage wear. Card only.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00