null

Singer

Singer

  • Singer SG-1000 Signal Generator front panel with SG-1001 Frequency Extender attached at right — range and frequency controls, output meters, and toggle switches visible Singer SG-1000 Signal Generator and SG-1001 Frequency Extender side-angle view showing teal-green metal enclosure and front panel controls

    Singer SG-1000 Signal Generator SG-1001 Frequency Extender 248-512 MHz RF

    Singer

    $300.00
    Was: $600.00
    Singer SG-1000 Signal Generator SG-1001 Frequency Extender 248-512 MHz RFThe Singer SG-1000 is a benchtop RF signal generator produced by Singer's Instrumentation Division in Bridgeport, Connecticut...
    24801
    SKU:
    24801
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    65.00 LBS
    Brand:
    Singer
    Model:
    SG-1000
    MPN:
    SG-1000
    Secondary Model:
    SG-1001
    SKU:
    24801
    Type:
    RF Signal Generator with Frequency Extender
    Frequency Range:
    248 MHz to 512 MHz (fundamental)
    Extended Frequency Range:
    Multiple ranges via divide-by-2 stages
    Form Factor:
    Benchtop / Rackmount
    Dimensions:
    23" x 17" x 5"
    Country/Region of Manufacture:
    United States
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes SG-1001 Frequency Extender unit. Sold as-is.
    Power Requirements:
    1 Amp Delay fuse; AC mains (exact voltage not confirmed)
    Included Components:
    SG-1000 Signal Generator, SG-1001 Frequency Extender
    Condition Notes:
    Singer SG-1000 Signal Generator with SG-1001 Frequency Extender appears to power on but could not be fully tested. Sold as-is for parts or repair — no functionality guarantee. Please view photos and contact us with questions.
    $300.00
    Was: $600.00
  • Singer Alfred 6608EDA Sweep Oscillator front-left angle view showing teal rackmount chassis and front panel controls Singer Alfred 6608EDA Sweep Oscillator direct front panel view showing Singer branding, Alfred Sweep Oscillator Model 6600 submodule, and BNC connectors

    Singer Alfred 6608EDA Sweep Oscillator 0.01-4.2 GHz Model 6600 For Parts

    Singer

    $150.00
    Was: $300.00
    Singer Alfred 6608EDA Sweep Oscillator 0.01-4.2 GHz Model 6600 For PartsBenchtop sweep oscillator and signal generator covering 0.01 to 4.2 GHz. Operates in CW Fine, L Band, and Sweep modes with...
    25045
    SKU:
    25045
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    45.00 LBS
    Brand:
    Singer
    Model:
    6608EDA
    Secondary Model:
    6600
    MPN:
    6608EDA
    SKU:
    25045
    Type:
    Sweep Oscillator / Signal Generator
    Frequency Range:
    0.01 to 4.2 GHz
    Sweep Period Range:
    0.01 to 10 seconds
    Operating Modes:
    CW Fine, L Band, Sweep
    Front Panel Controls:
    RF Marker, AM, Blanking, Sweep, Power
    Connectors - Front:
    BNC (RF output), BNC (Ext Sample), BNC (Marker), BNC (Sweep)
    Connectors - Rear:
    D-sub connector, multiple BNC ports visible
    Form Factor:
    Benchtop / Rackmount
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes Alfred Sweep Oscillator Model 6600 module; no RF output
    Country/Region of Manufacture:
    United States
    Manufacturer Location:
    Palo Alto, California
    Condition Notes:
    Singer Alfred 6608EDA Sweep Oscillator 0.01-4.2 GHz sold as-is for parts/repair. No RF output was detected during evaluation — not guaranteed functional. Chassis and panel intact with typical age-related wear.
    $150.00
    Was: $300.00
  • Singer 91263-1 Impulse Field Generator – three-quarter front-left view showing blue and gray benchtop enclosure with front panel controls and AC power cord Singer 91263-1 Impulse Field Generator – full front panel view showing dB above 1µV/MC scale, three control knobs, HV Regulator On lamp, Power On/Off toggle, BNC output, Singer nameplate, and Power Input label

    Singer 91263-1 Impulse Field Generator Stoddart Calibrated 105-125V BNC Output

    Singer

    $275.00
    Was: $550.00
    Singer 91263-1 Impulse Field Generator Stoddart Calibrated 105-125V BNC OutputBenchtop impulse field generator used for EMC/EMI radiated emissions and susceptibility testing. Generates calibrated...
    44846
    SKU:
    44846
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    13.00 LBS
    Brand:
    Singer
    Model:
    91263-1
    MPN:
    91263-1
    Type:
    Impulse Field Generator
    SKU:
    44846
    Manufacturer Division:
    Singer Electronic Products Division, Los Angeles, CA
    Country/Region of Manufacture:
    United States
    Power Requirements:
    105 to 125V, 50 to 60 Hz
    Output Connector:
    BNC
    Output Scale:
    dB above 1µV/MC
    Pulse Polarity:
    Selectable positive/negative (front panel knob)
    HV Regulator:
    Yes — front panel HV Regulator On indicator
    Fuse Rating:
    1A (primary fuse + spare fuse, front panel accessible)
    Calibration:
    Calibrated 11/15/2012 by Mr. Bender, Carnel Labs
    Form Factor:
    Benchtop / Portable
    Application:
    EMC/EMI radiated emissions and susceptibility testing
    Also Known As:
    Stoddart Impulse Generator
    Seller Notes:
    Includes attached AC power cord. Calibrated 11/15/2012 by Carnel Labs.
    Condition Notes:
    Singer 91263-1 Impulse Field Generator in good used condition. Pulled from a working environment. Shows light bench wear. Calibrated 11/15/2012 by Carnel Labs. BNC output and front panel controls intact. Please contact us with any questions.
    $275.00
    Was: $550.00
  • Singer Stoddart NM-37/57 EMI Field Intensity Meter – front panel view showing dual analog meters, band selector, attenuator, tune and fine tune knobs, and function controls Singer Stoddart NM-37/57 EMI Field Intensity Meter – rear panel showing IEC AC inlet, fuses, programmer multi-pin connector, IF output, linear, video FM, log, X output, Y output, and external scan BNC connectors

    Singer Stoddart NM-37/57 EMI Field Intensity Meter 30-1000 MHz Calibrated

    Singer

    $750.00
    Was: $1,500.00
    Singer Stoddart NM-37/57 EMI Field Intensity Meter 30-1000 MHz CalibratedBenchtop EMI and field intensity measurement instrument for detecting and quantifying electromagnetic radiation across VHF and...
    44844
    SKU:
    44844
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    64.00 LBS
    Brand:
    Singer Instrumentation
    Model:
    NM-37/57
    MPN:
    NM-37/57
    Secondary Model:
    Stoddart NM-37/57
    Type:
    EMI / Field Intensity Meter
    SKU:
    44844
    Measurement Type:
    EMI / Electromagnetic Field Intensity
    Frequency Range:
    30 MHz – 1000 MHz (30–57, 55–105, 101–192, 186–292, 285–445, 430–620, 600–825, 800–1000 MHz bands)
    Band Selection:
    8 overlapping bands, 30–1000 MHz
    Attenuator Range:
    0, +20 (X1), -20 (X0.1), +40, +60 dB
    Display:
    Dual analog meters: Frequency (MHz) and Microvolt/dB
    Meter Scale:
    Microvolts and dB referred to 1 µV
    Function Modes:
    Peak, Quasi-Peak, Field Intensity, Slideback Peak, Calibrate, BFO
    Audio Modes:
    AM, FM
    Power Supply:
    115V AC, 0.5A fused; also Battery operation
    Internal Power Rails:
    +17.5V and -17.5V (push-to-reset circuit breakers)
    Rear Outputs:
    IF Output, Recorder/Penlift, Linear, Video FM, LOG, X Output, Y Output, External Scan
    Rear Connectors:
    Programmer (multi-pin circular), BNC outputs (orange), IEC AC inlet
    Form Factor:
    Benchtop
    Country/Region of Manufacture:
    United States
    Calibration Status:
    Calibrated 11/14/2012 by Carnel Labs, Canoga Park CA; Due 12/14/13
    Calibration Standard:
    Traceable to NIST per MIL STD 45662A/ANSI/NCSL Z540-1-1994
    Serial Number (Internal):
    0502-08178
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes Carnel Labs calibration certificate. Inspected, good cosmetic condition.
    Condition Notes:
    Singer Stoddart NM-37/57 EMI Field Intensity Meter. Inspected, good used condition. Carnel Labs calibration cert dated 11/14/2012 (NIST traceable); recalibration recommended before compliance use. Normal wear. Please contact us with questions.
    $750.00
    Was: $1,500.00