Mitec
-
Mitec WR-159 1000W F-Band C-Band Waveguide Dummy Load Extender P/N 1510607
Mitec
$275.00Was: $550.00Mitec WR-159 1000W F-Band C-Band Waveguide Dummy Load Extender P/N 1510607Rigid waveguide dummy load extender rated for 1000 watts. Extends RF power absorption capacity for TWTA transmitter testing...52448- SKU:
- 52448
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 9.00 LBS
- Brand:
- Mitec
- Model:
- WR-159 Rigid Waveguide Assembly
- MPN:
- 1510607
- Type:
- Waveguide Dummy Load Extender
- SKU:
- 52448
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Unit only; C-Band to F-Band transition adapter not included
- Waveguide Size:
- WR-159
- Frequency Band:
- F-Band / C-Band Compatible
- Power Rating:
- 1000 Watts
- Port Dimensions:
- 40.386 x 20.193 mm
- Load Extender Dimensions:
- 13" x 5" x 5"
- Overall Dimensions:
- 16" x 14" x 5"
- Flange Type:
- Rectangular waveguide flange (WR-159)
- Application:
- TWTA transmitter testing, RF power load extension
- Compatible With:
- C-Band TWTA transmitters (with WR-159 transition)
- Country/Region of Manufacture:
- Canada
- Condition Notes:
- Mitec WR-159 1000W waveguide dummy load extender, P/N 1510607. Tested good at our facility during C-Band TWTA transmitter testing. C-Band to F-Band transition adapter not included. Typical wear from prior use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Mitec MC3719A 1:1 Local Control Unit MC3719 Satcom HPA Switch 19" Rack 3U
Mitec
$125.00Was: $250.00Mitec MC3719A 1:1 Local Control Unit MC3719 Satcom HPA Switch 19" Rack 3U This is a 1:1 redundancy switch controller designed for satellite communications high-power amplifier (HPA) systems. It...49854- SKU:
- 49854
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 41.00 LBS
- Brand:
- Mitec
- Model:
- MC3719A
- MPN:
- MC3719A
- Secondary Model:
- MC3719
- Type:
- 1:1 Local Control Unit / HPA Redundancy Switch Controller
- SKU:
- 49854
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold AS-IS for parts. Only AUTO and MANUAL lamps illuminate on lamp test.
- Country/Region of Manufacture:
- Canada
- Form Factor:
- 19" Rackmount, 3U
- Power Requirements:
- 120 VAC, 50/60 Hz
- Number of PSUs:
- 2 (PSU 1 and PSU 2, redundant)
- Application:
- Satellite / Satcom HPA 1:1 Redundancy Switching
- Switch Configuration:
- 1:1 HPA redundancy (SW1, SW2, SW3, SW4, SW5)
- Control Modes:
- Local, Remote, Computer
- Indicators:
- HPA On Line, Standby, Alarm; PSU On/Fault; Auto/Manual; Alarm Acknowledge
- Interface / Connectors:
- Multi-pin D-sub (P2, P3, P4), DB9 (PIA, PO, SYSTEM)
- Serial Number:
- 42981142-1
- Compatible With:
- Mitec satcom HPA systems requiring 1:1 redundancy control
- Condition Notes:
- This Mitec MC3719A 1:1 Local Control Unit is being sold AS-IS for parts or repair. During our lamp test, only the AUTO and MANUAL indicator lamps illuminate — the remaining indicators do not respond as expected.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00