Description
Yamaha LSII-B LS2BR-1250 FLIP-X Single Axis Robot DRC-2 Controller Sharp PLC
Used Yamaha FLIP-X single axis linear robot with 1250 mm stroke, equipped with DRC-2 servo controller, Sanyo Denki DC servo motor, and integrated Sharp JW PLC rack. Floor-standing unit with steel stand and cable management track.
Specifications & What's Included
- Model: Yamaha LSII-B LS2BR-1250
- Travel Length: 1250 mm
- Drive: Sanyo Denki Super L Type L404-012E18 DC servo motor
- Controller: Yamaha DRC-2 (Max 300VA, 100V AC input)
- PLC: Sharp JW rack with modules JW-1PU, JW-70CUN, JW-20CM, JW-10SU, JW-64NC, JW-325
- Power Supply: Omron S82K-05024 (AC100-240V switchable, DC24V 2.1A output)
- Includes integrated steel stand with casters
Applications
Single axis linear robots of this type are used for material handling, pick-and-place operations, and automated positioning in manufacturing and assembly lines. The FLIP-X series was commonly integrated into robotic workcells and transfer systems. Compatible with Yamaha motion control systems and programmable via the Sharp PLC modules installed.
Condition: Used
This Yamaha LSII-B LS2BR-1250 FLIP-X single axis robot has been inspected and appears to be in good condition. The linear rail, carriage assembly, and cable track all look intact with no obvious damage. The painted steel stand shows typical surface scuffs and wear consistent with prior shop use, and the enclosure panels have some light marks, but overall the unit presents well. The DRC-2 controller, Sharp JW PLC rack with modules, Sanyo Denki DC servo motor, Omron power supply, and internal wiring are all present and appear complete. Please view our photo set and contact us if you have any questions.
This Yamaha LSII-B LS2BR-1250 FLIP-X single axis robot has been inspected and appears to be in good condition. The linear rail, carriage assembly, and cable track all look intact with no obvious damage. The painted steel stand shows typical surface scuffs and wear consistent with prior shop use, and the enclosure panels have some light marks, but overall the unit presents well. The DRC-2 controller, Sharp JW PLC rack with modules, Sanyo Denki DC servo motor, Omron power supply, and internal wiring are all present and appear complete. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Yamaha Motor Co., Ltd. |
Model: |
LSII-B |
Secondary Model: |
LS2BR-1250 |
MPN: |
LS2BR-1250 |
SKU: |
47100 |
Type: |
Single Axis Linear Robot |
Series: |
FLIP-X Series |
Controller Model: |
Yamaha DRC-2 (Max 300VA) |
Servo Motor: |
Sanyo Denki Super L Type L404-012E18 DC Servo Motor |
PLC Rack Brand: |
Sharp |
PLC Modules Installed: |
JW-1PU, JW-70CUN, JW-20CM, JW-10SU, JW-64NC, JW-325 |
Power Supply (Internal): |
Omron S82K-05024, Input AC100-240V, Output DC24V 2.1A |
Controller Power Rating: |
Max 300VA |
Controller Input Voltage: |
100V AC (per DRC-2 label) |
Power Supply Input Voltage: |
AC100-120V / AC200-240V (switchable) |
Stroke / Travel Length: |
1250 mm (per LS2BR-1250 model designation) |
Drive Type: |
DC Servo Motor with belt/linear drive |
Cable Management: |
Integrated cable track (energy chain) |
Country/Region of Manufacture: |
Japan |
Form Factor: |
Floor-standing with integrated steel stand |
Stand Included: |
Yes — integrated steel stand with casters |
Condition: |
Used – Inspected, appears in good condition |
Seller Notes: |
Includes DRC-2 controller, Sharp JW PLC rack, Sanyo Denki servo motor, cable track, and stand |
Condition Notes: |
Yamaha LSII-B LS2BR-1250 FLIP-X single axis robot inspected and in good condition. DRC-2 controller, Sharp JW PLC rack, Sanyo Denki servo motor, and stand all present. Stand shows typical shop wear. Please contact us with questions. |
