Description
Western Digital WD1003V-MM2 Winchester Floppy ISA Controller Card 61-600173-00
This is a 16-bit ISA controller card designed to manage both Winchester hard drives and floppy drives in vintage IBM PC/XT/AT systems. The card provides the interface and control logic necessary for MFM hard drive and floppy drive operation.
Specifications & What's Included
- Brand: Western Digital
- Model: WD1003V-MM2 (Revision F000 X4)
- Bus Interface: ISA (16-bit)
- Compatible Drives: MFM Winchester hard drive, Floppy drive
- Form Factor: Full-Length ISA Card
- Date Code: August 1989
- Manufactured: Ireland
- Card only; no cables or brackets included
Applications
This controller card was used in IBM PC/XT/AT compatible systems throughout the 1980s and early 1990s to manage storage subsystems. It supported standard MFM hard drives and 5.25" or 3.5" floppy drives common to that era. The card served as the primary interface between the system bus and attached storage devices.
This Western Digital WD1003V-MM2 Winchester and floppy ISA controller card has been inspected and is in good used condition. It was pulled from a working environment where it was previously in use. The PCB shows normal age-related patina consistent with a late-1980s card, and the edge connector and drive headers appear clean and intact. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Western Digital |
Model: |
WD1003V-MM2 |
MPN: |
61-600173-00 |
Type: |
Winchester & Floppy Drive Controller Card |
SKU: |
40856 |
Bus Interface: |
ISA (16-bit) |
Compatible Drive Type: |
MFM / Winchester Hard Drive, Floppy Drive |
Form Factor: |
Full-Length ISA Card |
Revision / Variant: |
F000 X4 |
Date Code: |
8908 (August 1989) |
Country/Region of Manufacture: |
Ireland |
Compatible With: |
IBM PC/XT/AT and Compatible Systems |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Card only; no cables or brackets included. |
Condition Notes: |
Western Digital WD1003V-MM2 ISA controller card in good used condition. Pulled from a working environment. PCB and connectors appear clean and intact. Please view photos and contact us with any questions. |