Description
Verson Allsteel 25 Ton Mechanical Press Brake 3-Phase 2 HP Sheet Metal Bender
This Verson Allsteel press brake is a floor-standing, flywheel-driven mechanical press brake for forming sheet metal. A motor turns a flywheel through a V-belt, and a clutch engages the crankshaft to move the ram through a fixed 2 in stroke via pitman arms. Tonnage is delivered at the bottom of that stroke, which is the defining difference from hydraulic brakes, where the ram can be stopped and reversed at any point. The plates on this machine read Allsteel Press Co., Chicago and Dallas, and the 25-ton capacity is stamped on the rating plate. The Chicago 19 and Dallas 8 postal-zone addresses on the plates point to the mid-20th-century period of Verson's Allsteel line.
Specifications & What's Included
- Brand: Verson Allsteel (Allsteel Press Brake, Verson trade mark)
- Type: Mechanical (flywheel and clutch) press brake
- Capacity: 25 tons (rating plate: CAP. TONS 25)
- Shut height: 12 in (stroke down, adjusted up)
- Stroke of ram: 2 in
- Adjustment of ram: 2 in
- Manufacturer: Verson Allsteel Press Co., Dallas, Texas / Chicago, Illinois, USA
- Main drive motor: Brook Motors Ltd., Huddersfield (made in England), A.C. motor, 3 phase
- Motor rating: 2 HP, 220/440 V, 60 Hz, 5.8/2.9 full-load amps
- Power cord: 4-prong twist-lock plug marked 250V 3-phase
- Auxiliary drive: General Electric motor with right-angle worm gear reducer on the right side of the crown, with a motor starter enclosure on the right column
- Control: switch box with lever on the front of the ram; pushbutton motor starter enclosure on the right column
- Hand-crank dial: graduated dial with OUT/IN markings on the lower front of the bed stand
- Guarding: galvanized belt and flywheel guards
- Rear steel support frame with screw adjuster on the back of the bed
- Mounting: floor-standing on an integral steel base with foot pads and a front tube rail
- Includes: a few loose flat steel bar pieces shown in the photos; no other tooling, parts or accessories
Applications
The mechanical press brake is the standard small-shop machine for straight-line bends in sheet and light plate. It dates from the era when flywheel and clutch drives were the norm before hydraulic and CNC brakes became common. A 25-ton unit like this suits lighter gauges and shorter bend lengths.
- Industries & settings: sheet metal fabrication shops, HVAC and ductwork shops, electrical enclosure and panel makers, job shops, maintenance and tool rooms, and restoration or collector shops that work with vintage American machinery.
- Typical applications: bending brackets, channels, boxes, pans and flanges in mild steel, stainless and aluminum sheet; air bending and bottoming with matching punch-and-die sets.
- Compatible systems: accepts standard press brake punches and dies in the top and bottom tool holders; power is 3-phase through the twist-lock plug.
This Verson Allsteel 25 Ton mechanical press brake is in working condition. The green paint is chipped and faded across the crown, ram, bed and columns, and there is surface rust on the ram and bed die plates and on the gearbox and drive components. The wooden grip on the hand crank is cracked. The Brook Motors drive motor, the General Electric gearmotor, both nameplates and the 4-prong twist-lock power cord are in place. A few loose flat steel bar pieces come with the machine; no other tooling or accessories are included. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Verson Allsteel |
Model: |
Allsteel Press Brake |
MPN: |
9684-10 |
Type: |
Mechanical Press Brake |
SKU: |
53392 |
Capacity (Tons): |
25 Ton |
Country/Region of Manufacture: |
United States |
Machine Type: |
Mechanical Press Brake |
Application: |
Sheet Metal Bending and Forming |
Power Requirements: |
3-phase, 4-prong twist-lock plug marked 250V 3Ø |
Drive Motor: |
Brook Motors Ltd. 2 HP 3-phase, 220/440V, 60 Hz |
Condition: |
Used – In Working Condition |
Seller Notes: |
Includes loose flat steel bar pieces shown in photos; no other accessories |
Form Factor: |
Floor-Standing Industrial Machine |
Origin: |
Dallas, Texas / Chicago, Illinois, USA |
Condition Notes: |
Verson Allsteel 25 Ton mechanical press brake in working condition. Chipped, faded paint and surface rust on ram, bed and columns; cracked crank handle grip. Brook drive motor and gearbox intact. Loose steel bars only. |
Phase: |
Three Phase |
Motor Horsepower: |
2 HP |
Motor Voltage: |
220/440V |
Motor Full Load Amps: |
5.8/2.9 A |
Frequency: |
60 Hz |
Stroke of Ram: |
2 in |
Adjustment of Ram: |
2 in |
Shut Height: |
12 in (stroke down, adjusted up) |
Auxiliary Drive: |
General Electric motor with worm gear reducer |