Description
Tecnetics CP71180-02 Instec Temperature Controller 70VDC 1.75A 115/230VAC
Benchtop temperature controller and power supply designed for Instec scientific systems. Converts 115/230VAC input to regulated 70VDC output at 1.75A maximum, with RS-232 serial control via DB9 connector.
Specifications & What's Included
- Input: 115/230VAC, 50/60Hz selectable
- Output: 70VDC nominal, 1.75A max
- Control Interface: DB9 RS-232 serial
- Power Inlet: IEC C14 (standard 3-pin AC)
- Cooling: Fan-cooled design
- Unit only; no accessories beyond what appears in photos
Applications
The CP71180-02 serves as the primary power and temperature regulation component for Instec microscope heating/cooling stages and related laboratory equipment. These controllers were widely deployed in materials science, biological research, and industrial inspection workflows where precise thermal control is required during observation or measurement. Compatible with Instec Peltier stage systems and optical microscopy setups of that era.
This Tecnetics CP71180-02 Instec Temperature Controller has been inspected and is in good used condition. It was pulled from a working environment where it was in use and functional. The chassis is clean with light surface wear consistent with normal lab use. The rear cooling fan, DB9 serial port, power switch, voltage selector switch, and IEC AC inlet all appear intact and undamaged. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Tecnetics |
Model: |
CP71180-02 |
MPN: |
CP71180-02 |
Type: |
Temperature Controller / Power Supply |
SKU: |
24640 |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Unit only; no accessories included beyond what is shown in photos. |
Country/Region of Manufacture: |
United States |
Form Factor: |
Benchtop |
Input Voltage: |
115/230VAC, 50/60Hz |
Output Voltage: |
70VDC Nominal |
Output Current: |
1.75A Max |
Interface / Connector: |
DB9 (RS-232 Serial) |
Power Connector: |
IEC C14 (standard 3-pin AC inlet) |
Cooling: |
Fan-cooled |
Application / Use Case: |
Temperature control for Instec scientific systems |
Condition Notes: |
Tecnetics CP71180-02 Instec Temperature Controller. Used, inspected, in good condition. Pulled from a working environment where it was in use and functional. Rear connectors and fan intact. Photos available. |
