Secomak

Secomak 632 Direct Drive Centrifugal Hot Air Blower 9KW 415V EMG Motor IP54

(No reviews yet) Write a Review
SKU:
34939
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
66.00 LBS
Shipping:
Calculated at Checkout
  • Secomak 632 hot air blower left-side profile view showing teal housing, black direct drive motor, centrifugal scroll, cylindrical outlet, and black steel base frame
  • Secomak 632 centrifugal hot air blower right-side angled view showing circular fan inlet grille, cylindrical duct outlet, and installation instructions document on top of unit
  • Secomak 632 hot air blower close-up of cylindrical stainless outlet showing 6-blade impeller and heating element array inside
  • Secomak 632 rating plate showing Model 632, 9KW, 415V, Hot Air Attachment made in England by Secomak Ltd Stanmore, CE mark, and heater safety warning
  • EMG Elektromotoren GmbH DAS 71S 2-770 motor nameplate showing 0.37 kW, IP54, 60 Hz, 266/460V, 3470 RPM, made in Germany, July 2000
$350.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Secomak 632 Direct Drive Centrifugal Hot Air Blower 9KW 415V EMG Motor IP54

The Secomak 632 is a direct drive centrifugal hot air blower combining a centrifugal fan scroll with an integrated 9 kW electric resistance heater in a single compact unit. Manufactured by Secomak Ltd. of Stanmore, Middlesex, England, and CE marked, it delivers a continuous flow of heated air through a cylindrical duct outlet. The unit is driven by an EMG (Elektromotoren Grünhain GmbH & Co KG) DAS 71S 2-770 motor rated at IP54 for resistance to dust and water ingress. A built-in safety requirement means the heater must not be energised without the blower running.

Specifications & What's Included

  • Model: Secomak 632 Hot Air Attachment
  • Heater output: 9 kW
  • Heater supply voltage: 415V AC
  • Blower type: Direct drive centrifugal fan
  • Motor make/model: EMG DAS 71S 2-770 (Made in Germany)
  • Motor power: 0.37 kW
  • Motor voltage: 266/460V (Y-connected)
  • Motor current: 1.6 / 0.93A
  • Motor speed: 3,470 RPM
  • Motor frequency: 60 Hz
  • Motor enclosure rating: IP54
  • Outlet: Cylindrical stainless duct with internal 6-blade impeller/heater assembly
  • Mounting: Bolted to black powder-coated steel base frame
  • CE marked; Made in England
  • Includes: Paper installation instructions document (visible in photos)

Applications

The Secomak 632 is a self-contained hot air attachment designed for industrial process heating and drying applications where a directed stream of heated forced air is required. Units of this type are used in manufacturing environments for tasks such as drying coated or printed substrates, warming moulds and tooling, accelerating adhesive or paint curing, and providing localised process heat in production lines. The centrifugal fan design moves a high volume of air at moderate pressure, making it well suited to duct-fed or open-discharge heating systems. Secomak has produced centrifugal fan and hot air blower systems since the mid-twentieth century for industrial and commercial customers, and the 632 series dates from the era when 415V three-phase supplies were the standard for industrial heating equipment in the United Kingdom and Europe. This class of equipment remains in use today wherever a compact, direct-coupled hot air source is needed on a production floor or in a test or conditioning rig.

Condition: Used
This Secomak 632 Direct Drive Centrifugal Hot Air Blower has been pulled from a working environment and visually inspected. The unit appears in good overall condition — the teal housing is clean with no obvious dents or heavy wear, the centrifugal scroll and cylindrical duct outlet are intact, and the EMG IP54 motor shows normal light use. The steel base frame shows minor surface marks typical of industrial use. The unit has not been powered up or bench-tested at our facility. A paper installation instructions document is included with the unit, as seen in the photos. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Secomak
Model:
632
MPN:
632
Type:
Direct Drive Centrifugal Hot Air Blower
SKU:
34939
Heater Power:
9 kW
Heater Voltage:
415V AC
Motor Make/Model:
EMG DAS 71S 2-770
Motor Power:
0.37 kW
Motor Voltage:
266/460V (Y)
Motor Current:
1.6 / 0.93A
Motor Speed:
3470 RPM
Motor Frequency:
60 Hz
Motor Enclosure Rating:
IP54
Motor Date:
July 2000
Country/Region of Manufacture:
England
Certifications:
CE
Mounting:
Steel base frame
Outlet Type:
Cylindrical duct outlet
Seller Notes:
Unit on steel base frame. Installation instructions document included (visible in photos).
Condition Notes:
This Secomak 632 Centrifugal Hot Air Blower was pulled from a working environment and visually inspected. Housing, scroll, and motor appear in good used condition. Not powered or tested at our facility. Installation instructions included.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose