Reliance Electric

Reliance Electric P56H1427J Centrifugal Blower 1/3HP 208-230/460V 3Ph 3450 RPM

(No reviews yet) Write a Review
SKU:
51799
MPN:
P56H1427J
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
52.00 LBS
Shipping:
Calculated at Checkout
  • Reliance Electric P56H1427J centrifugal blower – three-quarter view of black housing, inlet, outlet duct, green motor and conduit
  • Reliance Electric P56H1427J blower – rear view of motor fan cover, junction box and mounting bracket
  • Reliance Electric P56H1427J motor nameplate – 1/3 HP, 3450 RPM, 208-230/460V, 3 phase, FB56C frame
  • Blower outlet duct opening measured with calipers beside wiring leads
  • Blower inlet collar measured with calipers showing residue on the rim
$290.00
Was: $575.00
Current Stock: 1

Sold Out

Description

Reliance Electric P56H1427J Centrifugal Blower 1/3HP 208-230/460V 3Ph 3450 RPM

This Reliance Electric P56H1427J centrifugal blower is a motor-driven radial-flow air mover. A TEFC three-phase induction motor drives an impeller inside a scroll-shaped housing. Air enters axially at the inlet collar and is accelerated radially, then discharged through a tangential outlet duct. This configuration develops higher static pressure than an axial fan of comparable size. It suits ducted, restricted-flow service, where a propeller fan would stall. The motor is a 1/3 HP, 3450 RPM, dual-voltage (208-230/460 V) Reliance Electric P-type unit in frame FB56C, mounted on a steel bracket behind the blower housing.

Specifications & What's Included

  • Make: Reliance Electric (Reliance Electric Company, Greenville, SC; made in USA)
  • Motor ID / model: P56H1427J
  • Nameplate catalog number: P56H1427-17$IF
  • Type: P; frame FB56C
  • Output: 1/3 HP at 3450 RPM
  • Phase and frequency: three phase, 60 Hz
  • Voltage: 208-230 V or 460 V (dual-voltage, set by lead connection; nameplate diagrams for high and low voltage)
  • Operating voltage range per nameplate: 200 V minimum, 506 V maximum
  • Full-load current: 1.8 A at 208-230 V; 0.9 A at 460 V
  • Service factor: 1.15
  • Duty: continuous
  • Insulation: class F; maximum ambient 40 °C
  • NEMA design B; NEMA code letter M
  • Enclosure: TE (totally enclosed, fan cooled), IP44
  • Certification marks on nameplate: UL recognized, CSA, CE
  • Reversal: interchange any two line leads, per nameplate
  • Blower: black-painted centrifugal housing with a round inlet collar and a round tangential outlet
  • Duct openings, approximate caliper readings in photos: outlet about 100 mm (4 in); inlet about 127 mm (5 in)
  • Motor: green housing with a junction box on top, a guarded fan cover, and a steel mounting bracket with a hole pattern in the base
  • Flexible metal conduit with a fitting is attached to the motor junction box in the photos
  • Includes loose wiring leads (brown, green, yellow and other conductors) as pictured
  • Includes a black outlet duct piece as pictured

Applications

Centrifugal blowers with a TEFC motor of this size are used for local exhaust and ducted air movement. This type is sized by the static pressure it must overcome, not just by airflow.

  • Industries & settings: Industrial plants, manufacturing and process areas, laboratories, and equipment cabinets or enclosures that need forced ventilation.
  • Typical applications: Fume and exhaust extraction through small-bore ductwork, process air supply, equipment cooling, and ventilation of enclosures where air must be pushed through filters or ducting.
  • Compatible systems: Three-phase 208-230 V or 460 V, 60 Hz supplies, typically through a motor starter or motor control center, with the 4-inch and 5-inch round duct connections shown in the photos.
Condition: Used
This Reliance Electric P56H1427J centrifugal blower has been powered and tested at our facility and is in good working order -- it powers on and moves air strongly. The blower housing and motor show typical wear consistent with prior industrial use, including minor scuffing on the housing exterior. The nameplate is intact and fully legible. The unit includes loose wiring leads and a black outlet duct piece as pictured. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Brand:
Reliance Electric
Model:
P56H1427J
MPN:
P56H1427J
Secondary Model:
P56H1427-17$IF
Type:
Centrifugal Blower with Motor
SKU:
51799
Seller Notes:
Includes loose wiring leads and a black outlet duct piece as pictured
Country/Region of Manufacture:
United States
Horsepower:
1/3 HP
RPM:
3450
Voltage Rating:
208-230/460 V AC
Current Rating (Amps):
1.8 A at 208-230 V; 0.9 A at 460 V
Phase:
Three Phase
Frequency:
60 Hz
Frame Size:
FB56C
Enclosure Type:
TEFC (Totally Enclosed Fan Cooled)
Enclosure Rating:
IP44
Insulation Class:
F
Service Factor:
1.15
NEMA Design:
B
Duty Rating:
Continuous
Maximum Ambient Temperature:
40 °C
Certifications:
UL, CSA, CE
Power Requirements:
208-230/460V AC, 3-Phase, 60 Hz
Form Factor:
Motor-mounted centrifugal blower on base bracket
Condition:
Used – Inspected and Tested
Condition Notes:
This Reliance Electric P56H1427J centrifugal blower has been powered and tested at our facility and is in good working order — it powers on and moves air strongly.
View AllClose