Power-One

Power-One HE15-9-A International Series Linear Power Supply 15VDC 9A 135W CE

(No reviews yet) Write a Review
SKU:
52640
MPN:
HE15-9-A
Condition:
New
Availability:
Currently out of stock — contact us for availability.
Weight:
16.00 LBS
Shipping:
Calculated at Checkout
  • Power-One HE15-9-A International Series linear power supply front panel showing four TO-3 pass transistors (Q1–Q4), CE mark, TÜV badge, and jumper configuration label
  • Power-One HE15-9-A interior view showing laminated-core transformer on left, control PCB center, and two large blue filter capacitors on right
  • Close-up of Q1 transistor (SN3055) mounting hardware on Power-One HE15-9-A showing heavy rust and corrosion on mounting screw and surrounding panel area
  • Close-up of Power-One HE15-9-A terminal block showing degraded adhesive residue buildup alongside jumper configuration label indicating 3A max fuse rating
  • Power-One Declaration of Conformity document dated September 27, 1996 showing moisture staining and wrinkling; references ISO 9001, EN29001, EN60938:1992+A1+A2:1993, LVD 73/23/EEC
  • Partial Power-One spec sheet showing moisture damage — paper yellowed, wrinkled, and partially translucent from water exposure
$55.00
Was: $100.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Power-One HE15-9-A International Series Linear Power Supply 15VDC 9A 135W CE

The Power-One HE15-9-A is a single-output linear DC power supply from Power-One's International Series, rated at 15VDC at 9 amps (135W). The regulation circuit is built around four TO-3-package pass transistors (Q1–Q4) mounted on the front panel, with a large laminated-core transformer and filter capacitor bank — the classic architecture of high-current linear bench and chassis supplies from the mid-1990s. The International Series designation reflects compliance with international safety and EMC standards (CE, TÜV, UL) for use in global markets.

Specifications & What's Included

  • Model: HE15-9-A (also cross-referenced as HE5-9-A)
  • Series: Power-One International Series (Linear Component Power Supplies)
  • Output Voltage: 15VDC
  • Output Current: 9A
  • Output Power: 135W
  • Number of Outputs: 1
  • Regulation: Linear
  • Pass Transistors: 4x TO-3 package devices (Q1–Q4); Q1 marked SN3055 (Texas Instruments 2N3055-type)
  • Max Fuse Rating: 3A (per jumper configuration label on unit)
  • Form Factor: Chassis / panel-mount module with rack-mounting ears
  • Certifications: CE, TÜV, UL, ISO 9001, EN29001
  • Standards: EN60938:1992 + A1 + A2:1993; LVD 73/23/EEC
  • Country of Manufacture: United States
  • Includes: Declaration of Conformity (dated September 27, 1996) and partial spec sheet

Applications

Power-One's International Series linear power supplies are chassis-mount DC regulators designed for integration into OEM equipment, industrial control panels, rack systems, and laboratory instruments. Linear supplies of this class — heavy transformer, large filter capacitors, TO-3 pass transistors — were a standard building block in industrial automation, telecommunications, and precision instrumentation throughout the 1980s and 1990s. They are valued for their low output noise and ripple compared to switching supplies, making them suitable for sensitive analog circuitry, legacy instrumentation, and any application where EMI from a switcher is unacceptable. This HE15-9-A configuration provides a regulated 15VDC rail at up to 9 amps, which covers a wide range of embedded control and analog signal processing systems. Linear supplies of this type remain in use today for repair, retrofit, and replacement of original equipment.

Condition: Open Box
This Power-One HE15-9-A International Series Linear Power Supply is new from the manufacturer but has been in open-box storage for an extended period and shows moisture exposure damage. The Q1 transistor (SN3055) mounting hardware has heavy rust and corrosion visible on the screw and surrounding panel area. The terminal block has degraded adhesive residue buildup. The included Declaration of Conformity (dated September 27, 1996) and partial spec sheet both show moisture staining and wrinkling. The unit has not been powered or tested at our facility. Buyers should inspect all components carefully before use and determine whether corroded hardware requires cleaning or replacement. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Power-One
Model:
HE15-9-A
Secondary Model:
HE5-9-A
MPN:
HE15-9-A
Type:
Linear Power Supply
SKU:
52640
Series:
International Series
Output Voltage:
15VDC
Output Current:
9A
Output Power:
135W
Max Fuse Rating:
3A
Number of Outputs:
1
Certifications:
CE, TÜV, UL, ISO 9001, EN29001
Standards:
EN60938:1992+A1+A2:1993, LVD 73/23/EEC
Form Factor:
Chassis / Panel Mount
Country/Region of Manufacture:
United States
Seller Notes:
Includes Declaration of Conformity and partial spec sheet. Moisture exposure in storage.
Condition Notes:
Power-One HE15-9-A Linear Power Supply. New/open-box, but moisture-exposed in storage. Q1 mounting hardware has heavy rust; terminal block has degraded adhesive residue. Included DoC and spec sheet show moisture staining. Not powered or tested.
Regulation Type:
Linear
Pass Transistors:
4x TO-3 package (Q1–Q4); Q1: SN3055 (TI 2N3055-type)
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose