Photo-Sonics Inc.

Photo-Sonics Multiple Camera Driver ZC-706C 4-Output 28VDC Switchcraft Vintage

(No reviews yet) Write a Review
SKU:
35483
MPN:
Multiple Camera Driver
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
11.00 LBS
Shipping:
Calculated at Checkout
  • Photo-Sonics Multiple Camera Driver in Zero Corp ZC-706C blue aluminum case — lid open showing front panel with knobs and indicator LEDs
  • Photo-Sonics ZC-706C Multiple Camera Driver — rear panel view showing four Switchcraft output connectors, input connector, and power connector
  • Photo-Sonics Multiple Camera Driver front panel close-up — power selector knob, Battery Test meter, Event/Time display LEDs, Output 1–4 indicators, Current Adjust, Photo-Sonics Inc. Burbank Calif. label
  • ZC-706C rear connector panel close-up — four Switchcraft circular multi-pin output connectors (1–4), input connector, and power connector with OUTPUTS and INPUT labels
$325.00
Was: $800.00
Current Stock: 1

Sold Out

Description

Photo-Sonics Multiple Camera Driver ZC-706C 4-Output 28VDC Switchcraft Vintage

Multiple camera driver and timing controller manufactured by Photo-Sonics in Burbank, California. Housed in a Zero Corp ZC-706C aluminum enclosure with four expandable outputs, designed to synchronize and control high-speed film cameras from a single 28VDC power source.

Specifications & What's Included

  • 4 Switchcraft multi-pin circular outputs (expandable)
  • Input voltage: 28VDC or AC/CHG
  • Power options: Battery (28VDC) or AC charger
  • All connectors: Switchcraft circular multi-pin
  • Controls: Power selector knob, Event/Time display, Battery Test
  • Status indicators: Event LED, Time LED, Output 1–4 LEDs, Current Adjust
  • Form factor: Portable benchtop unit in hinged aluminum transit case

Applications

Used in high-speed photography and scientific cinematography to trigger and synchronize multiple film cameras simultaneously. Typically paired with Photo-Sonics high-speed film cameras and compatible LED or strobe drivers. Common in ballistics testing, crash analysis, industrial inspection, and laboratory research environments where frame-accurate multi-camera synchronization is required.

Condition: Used
This Photo-Sonics Multiple Camera Driver in its Zero Corp ZC-706C aluminum enclosure has been inspected and is in good used condition. It was pulled from a working environment where it was in active use. The blue aluminum case shows light scuffing and general wear consistent with field use, and the handle on the rear shows wear, but the enclosure latches are intact. The front panel face is clean and legible, with all knobs, indicator LEDs, and the Battery Test meter visible and present. The rear Switchcraft connectors appear intact with no obvious damage. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Photo-Sonics
Model:
Multiple Camera Driver
MPN:
ZC-706C
Type:
Multiple Camera Driver / Timing Controller
SKU:
35483
Enclosure Model:
Zero Corp ZC-706C Aluminum Enclosure
Number of Outputs:
4 (expandable)
Input Voltage:
28VDC or AC/CHG
Power Source:
Battery (28VDC) or AC/Charger
Connector Type:
Switchcraft multi-pin circular (outputs, input, power)
Output Connectors:
4x Switchcraft circular multi-pin (Outputs 1–4)
Input Connector:
Switchcraft circular multi-pin
Power Connector:
Switchcraft circular
Controls:
Power selector knob, Event/Time display, Battery Test
Indicators:
Event LED, Time LED, Output 1–4 status LEDs, Current Adjust
Form Factor:
Portable / Benchtop — hinged aluminum transit case
Country/Region of Manufacture:
United States
Manufacturer Location:
Burbank, California
Compatible With:
High-speed film cameras, LED drivers (third-party)
Application:
High-speed photography, scientific cinematography
Condition:
Used – Pulled from Working Environment
Seller Notes:
Unit only — no additional accessories observed in photos
Condition Notes:
Photo-Sonics Multiple Camera Driver in Zero Corp ZC-706C enclosure. Inspected and in good used condition; pulled from a working environment. Case shows light wear; panel and connectors intact.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose

Related Products

Related Products

Photo-Sonics 22-1099-100 Control Box top panel view showing multi-pin connectors, toggle switches, and HI/LO selector with yellow-accented terminals Photo-Sonics 22-1099-100 Control Box front panel showing REMOTE input, 2500-1500 FPS and 1000-500 FPS toggle switches, READY indicator, CAMERA connector, and 208V 3-phase input
Add to Cart
Quick view

Photo-Sonics 22-1099-100 Control Box 208V 3-Phase 30A 60Hz High-Speed Camera

Photo-Sonics Inc

$375.00
Was: $750.00
Photo-Sonics 22-1099-100 Control Box 208V 3-Phase 30A 60Hz High-Speed CameraThe Photo-Sonics Inc 22-1099-100 is a three-phase control box designed to power and control Photo-Sonics high-speed film...
35467
SKU:
35467
Availability:
Usually ships within 1-2 business days.
Weight:
30.00 LBS
Brand:
Photo-Sonics
Model:
22-1099-100
MPN:
22-1099-100
Type:
Control Box / Power Control Unit
SKU:
35467
Voltage Rating:
208V
Current Rating:
30A
Phase:
Three Phase (3-Phase)
Frequency:
60Hz
Compatible With:
Photo-Sonics System 1 & System 4 High-Speed Cameras
Wiring Diagram:
22-1/8
Country/Region of Manufacture:
United States
Form Factor:
Portable / Benchtop Enclosure
Connector Types:
Multi-pin circular (Remote/Input), Military-style camera connector
FPS Range (System 4):
1000-500 FPS, 2500-1500 FPS (HI/LO switch)
Seller Notes:
Control box only; no camera included. Pulled from a working environment.
Condition:
Used – Pulled from Working Environment
Condition Notes:
Photo-Sonics 22-1099-100 Control Box in good used condition. Pulled from a working environment. Shows typical surface wear. Connectors and switches appear intact. No major damage visible.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Photo-Sonics 35mm-4B camera power supply – front left view showing military circular output connectors and attached cables Photo-Sonics 35mm-4B power supply – right side view showing white metal enclosure with surface wear and attached power cable
Add to Cart
Quick view

Photo-Sonics 35mm-4B Camera Power Supply 120V 60Hz 1Ph 1.18A Wiring ZG-180

Photo-Sonics

$150.00
Was: $300.00
Photo-Sonics 35mm-4B Camera Power Supply 120V 60Hz 1Ph 1.18A Wiring ZG-180This is a standalone power supply unit designed for the Photo-Sonics 4B 35mm high-speed film camera. It converts 120V AC...
35528
SKU:
35528
Availability:
Usually ships within 1-2 business days.
Weight:
28.00 LBS
Brand:
Photo-Sonics
Model:
35mm-4B
MPN:
35mm-4B
Type:
Camera Power Supply
SKU:
35528
Condition:
Used – Inspected
Compatible With:
Photo-Sonics 4B 35mm High Speed Film Camera
Input Voltage:
120V AC
Phase:
Single Phase
Frequency:
60 Hz
Amperage:
1.18 A
Wiring Diagram:
ZG-180
Connector Type:
Military-style circular connectors; Remote port
Input Connector:
240V 1-phase locking circular input connector
Output Connector:
Military-style multi-pin circular connector
Form Factor:
Standalone Box / Portable
Country/Region of Manufacture:
United States (Burbank, California)
Seller Notes:
Includes attached power cable and output harness. No camera included.
Condition Notes:
Photo-Sonics 35mm-4B camera power supply. Inspected, appears in good used condition. Enclosure shows surface wear and paint chipping at corners/latch. Connectors and cabling intact. Not powered or tested at our facility.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Photo-Sonics 4B 70mm High Speed Film Camera Sync Motor — front view showing rating plate, caution label, and attached multi-pin power cable Photo-Sonics rating plate close-up showing 240V, 1HP, 1-Phase, 60Hz, 1A, 3600 RPM specs and Burbank California manufacture label
Add to Cart
Quick view

Photo-Sonics 4B 70mm High Speed Film Camera Sync Motor 500 FPS 240V 1HP 1PH

Photo-Sonics

$375.00
Was: $750.00
Photo-Sonics 4B 70mm High Speed Film Camera Sync Motor 500 FPS 240V 1HP 1PHThe Photo-Sonics 4B is a high-speed synchronous AC motor purpose-built for driving 70mm film through a Photo-Sonics...
35517
SKU:
35517
Availability:
Usually ships within 1–2 business days.
Weight:
35.00 LBS
Brand:
Photo-Sonics
Model:
4B
MPN:
4B
Type:
High Speed Film Camera Sync Motor
SKU:
35517
Voltage:
240V
Horsepower:
1 HP
Phase:
Single Phase
Frequency:
60 Hz
Amperage:
1 A
Speed:
3600 RPM
Max Frame Rate:
500 Frames Per Second (FPS)
Film Format:
70mm
Film Load:
500 ft max at 500 FPS
Connector Type:
Multi-pin circular military-style connector
Country/Region of Manufacture:
United States
Condition:
Used – Inspected and in Good Condition
Seller Notes:
Includes attached multi-pin power cable. Motor only — camera body not included.
Application:
High speed 70mm film cinematography, ballistic, scientific imaging
Form Factor:
Standalone Motor Unit
Condition Notes:
Photo-Sonics 4B 70mm High Speed Sync Motor inspected and in good used condition. Housing shows normal wear and aging. Rating plate and caution label present and legible. Multi-pin power cable attached and intact.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Traid Corp intervalometer controller open in aluminum travel case, front panel view showing indicator lights and controls Traid Corp intervalometer controller front panel detail — frames per second dial, variable rate knob, pulse width knob, ON/OFF/MANUAL switches, and Overload/ON/Pulse indicator lights
Add to Cart
Quick view

Traid Corp High Speed Film Camera Intervalometer Controller w/ Travel Case

Traid

$350.00
Was: $700.00
Traid Corp High Speed Film Camera Intervalometer Controller w/ Travel CaseIntervalometer controller designed for timing and triggering high-speed film cameras. Provides adjustable frame rate control...
42172
SKU:
42172
Availability:
Usually ships within 1-2 business days.
Weight:
19.00 LBS
Brand:
Traid Corporation
Model:
Intervalometer Controller
MPN:
Unknown
Type:
Film Camera Intervalometer Controller
SKU:
42172
Condition:
Used – Pulled from Working Environment
Seller Notes:
Includes aluminum travel/carrying case with latches and handle
Country/Region of Manufacture:
United States
Form Factor:
Portable / Benchtop in Travel Case
Application:
High Speed Film Camera Timing and Trigger Control
Frame Rate Settings:
1/2, 1, 2, 4, 8, CINE, MANUAL, VARIABLE, STOP
Controls:
Variable Rate knob, Pulse Width knob, Manual trigger
Indicators:
Overload (yellow), ON (red), Pulse (green) indicator lights
Connectors:
Multi-pin camera connector, power connector (front panel)
Multiplier Switch:
X1 / X10 pulse multiplier toggle
Enclosure:
Aluminum travel case with carry handle and two latches
Manufacturer Location:
Glendale, California
Condition Notes:
Traid Corp Film Camera Intervalometer Controller pulled from a working environment where it was in use and functional. Inspected and in good condition. Travel case shows surface wear and oxidized latches but closes securely.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Vintage camera chronograph viewer with hard carrying case open and power cord laid beside it on a gray surface Chronograph dial face close-up showing 0–30 second scale with 1/100s graduation markings and two illumination bulbs flanking the dial
Add to Cart
Quick view

Vintage Camera Chronograph Viewer 115V 60Hz 30s 1/100s w/ Case Cord Bulbs

Unbranded

$300.00
Was: $600.00
Vintage Camera Chronograph Viewer 115V 60Hz 30s 1/100s w/ Case Cord BulbsOptical timing instrument designed for precise timing measurements in film and photography applications. Measures intervals...
23790
SKU:
23790
Availability:
Usually ships within 1-2 business days.
Weight:
16.00 LBS
Brand:
Unbranded
Model:
Chronograph Camera Viewer
Type:
Camera Chronograph Viewer / Optical Timing Instrument
SKU:
23790
Power Requirements:
115V AC, 60Hz
Timing Range:
0–30 seconds
Resolution:
1/100 second (0.01 s)
Condition:
Used – Pulled from Working Environment
Includes:
Chronograph unit, carrying case, power cord, Westinghouse bulbs
Lamp/Bulb Type:
Westinghouse 125V 50W (bay base)
Connector Type:
Multi-pin circular connector (power cable)
Form Factor:
Portable / Benchtop with carrying case
Application:
Film and cinematography timing, event timing, ballistics photography
Seller Notes:
Includes power cord, hard carrying case, and Westinghouse 125V 50W bulbs
Condition Notes:
This vintage camera chronograph viewer is in good used condition, pulled from a working environment where it was in active use. Includes hard case, power cord, and Westinghouse 125V 50W bulbs. Normal wear visible.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov