Description
PanStar PS-2000P 200W AT Power Supply 115/230V 50/60Hz w/ Cables Switch
This is a 200W AT form factor power supply used in desktop computers. It converts AC mains power to regulated DC outputs required by vintage PC systems.
Specifications & What's Included
- Model: PS-2000P | Power Output: 200W
- Input: 115/230V AC, 50/60Hz (8A/4A)
- Output: +5V (20A), -5V (0.5A), +12V (8A), -12V (0.5A)
- Connectors: AT power, Molex 4-pin, Berg floppy
- Includes: Full wire harness with connectors and power switch
- UL Listed (E149857), CSA Certified (LR78471)
Applications
AT power supplies were standard in desktop computers from the 1980s through early 2000s. This unit is compatible with AT form factor motherboards and vintage PC systems that require these connector types and voltage rails. It was commonly used in older workstations, industrial computers, and general-purpose desktop machines.
Please note: We may have multiple units of this item in stock. The unit you receive may vary slightly from the one shown in the photos. All units are functionally equivalent and inspected to the same standard.
This PanStar PS-2000P 200W AT Power Supply has been tested at our facility and is in good working order. The unit powers on and has been confirmed functional. Cosmetically, the unit shows typical wear consistent with prior use — the metal housing has light scuffing and the label sticker on the side carries a yellow QC sticker. The full wire harness with Molex 4-pin, Berg floppy, and AT motherboard connectors is included, along with the panel-mount power switch. Both IEC AC input connectors on the rear are present and undamaged. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
PanStar Electronics Co., Ltd. |
Model: |
PS-2000P |
MPN: |
PS-2000P |
SKU: |
19619 |
Condition: |
Used – Inspected and Tested |
Seller Notes: |
Includes full wire harness with connectors and power switch |
Form Factor: |
AT Desktop |
Power Output: |
200W |
Power Requirements: |
115/230V AC, 50/60Hz, 8A/4A |
Fuse Rating: |
F5A 250V |
Output Voltages: |
+5V, -5V, +12V, -12V |
Output Currents: |
+5V: 20A, -5V: 0.5A, +12V: 8A, -12V: 0.5A |
Connector Type: |
AT power connectors, Molex 4-pin, Berg floppy |
Compatible With: |
AT form factor desktop computers, vintage PC systems |
Certifications: |
UL Listed (E149857), CSA (LR78471), Level 3 |
Country of Manufacture: |
Taiwan |
Condition Notes: |
This PanStar PS-2000P 200W AT Power Supply has been tested at our facility and is in good working order. Includes full wire harness and power switch. Light cosmetic wear on housing. Please contact us with any questions. |