Description
Packard Bell 190083 Lite-On PA-4151-9B1 150W AT Desktop Power Supply
This is a used 150W AT form-factor power supply manufactured by Lite-On for Packard Bell desktop computers. It converts AC input to regulated DC outputs for motherboard and peripheral devices.
Specifications & What's Included
- Power Output: 150W
- Form Factor: AT (legacy desktop standard)
- Input: 100–127V / 200–240V AC, 50–60Hz
- Output Rails: +5V @ 18A, +12V @ 4.6A, -5V @ 0.3A, -12V @ 0.3A
- Connectors: AT main power connector, 4-pin AT Molex peripherals
- Includes: Attached AT power harness with Molex connectors
- Manufactured: Taiwan / China
Applications
AT power supplies were standard in desktop computers from the 1980s through early 2000s. This unit is compatible with Packard Bell AT-form-factor systems and other contemporary desktop platforms requiring 150W AT supplies. Typical uses include powering motherboards, floppy drives, hard drives, and expansion cards in legacy systems.
Please note: We may have multiple units of this item in stock. The unit you receive may vary slightly from the one shown in the photos. All units are functionally equivalent and inspected to the same standard.
This Packard Bell 190083 / Lite-On PA-4151-9B1 150W AT desktop power supply has been inspected and is in used condition. The unit shows typical surface wear consistent with prior use — light scuffing and minor soiling on the metal housing are visible in the photos. The output harness and Molex connectors appear intact and undamaged. NOTE: The original listing asserted this unit was tested and guaranteed working; however, we have flagged this claim for internal review, as we cannot confirm it was documented by our staff. Please verify the tested/working status against your inventory records before publishing. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Packard Bell |
Manufacturer: |
Lite-On (Taiwan Liton Electronic Co., Ltd.) |
Model: |
190083 |
Secondary Model: |
PA-4151-9B1 |
MPN: |
PA-4151-9B1 |
SKU: |
14092 |
Condition: |
Used – Inspected |
Form Factor: |
AT |
Power Output: |
150W |
Input Voltage: |
100-127V / 200-240V AC, 50-60Hz |
Input Current: |
5A (100-127V) / 2.5A (200-240V) |
Output +5V: |
18A |
Output +12V: |
4.6A |
Output -5V: |
0.3A |
Output -12V: |
0.3A |
Ambient Temperature Max: |
50°C |
Connector Type: |
AT Molex (4-pin peripheral), AT main power connector |
Country of Manufacture: |
Taiwan / China (per label) |
Compatible With: |
Packard Bell AT-form-factor desktop computers |
Seller Notes: |
Includes attached AT power harness with Molex connectors. No additional accessories. |
Condition Notes: |
Packard Bell 190083 / Lite-On PA-4151-9B1 150W AT power supply. Used, inspected. Shows typical surface wear. Harness and Molex connectors appear intact. Tested/working status flagged for internal review — please verify before publishing. |
