Description
Network Peripherals NP-SET-210 NuSwitch FE-210 10-Port 100BASE-TX Switch Hub
Managed Fast Ethernet switch with 10 ports operating at 10/100 Mbps. This 1U rackmount unit provides network switching and management capabilities for industrial and telecom environments.
Specifications & What's Included
- 10 x 10/100BASE-TX RJ-45 ports
- Managed switch with SNMP and VLAN support
- DB-9 DCE console port (9600 baud)
- 1U rackmount form factor
- Front-panel LED bandwidth display and per-port indicators
- 100-240VAC, 50/60Hz power input
- FCC Class A and CE certified
- Unit only; no accessories included
Applications
This switch type was commonly deployed in industrial networks, telecommunications facilities, and enterprise LANs during the late 1990s and 2000s Fast Ethernet era. Managed switches with VLAN and SNMP support were used to segment network traffic, prioritize critical communications, and provide remote monitoring in facilities requiring reliable Ethernet connectivity across distributed locations.
This Network Peripherals NP-SET-210 NuSwitch FE-210 10-port Fast Ethernet switch has been inspected and is in good condition. The chassis and front panel show typical light cosmetic wear consistent with prior rack or bench use. All ten RJ-45 ports and the DB-9 console port appear intact. The rear IEC power inlet and fan vent are clean and undamaged. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Network Peripherals |
Model: |
NP-SET-210 |
MPN: |
NP-SET-210 |
Secondary Model: |
FE-210 |
SKU: |
25325 |
Type: |
Managed Fast Ethernet Switch |
Number of Ports: |
10 |
Port Speed: |
10/100BASE-TX (100 Mbps Fast Ethernet) |
Connector Type: |
RJ-45 (10/100BASE-TX), DB-9 Console |
Console Port: |
DB-9 DCE, 9600 baud |
Management Type: |
Managed — SNMP, Virtual LAN (VLAN) |
Form Factor: |
1U Rackmount |
Power Requirements: |
100-240VAC, 50/60Hz, 1A |
Fuse Rating: |
T2A/250V |
Bandwidth Display: |
Front-panel LED: 1+, 10+, 100+, 200+ Mbps |
LED Indicators: |
Power, Diag, SNMP, Virtual LAN, Power Links, per-port Link/FWD/RX Disable, FDX/TX/TX Disable |
Certifications: |
FCC Class A, CE |
Country/Region of Manufacture: |
Asia (Network Peripherals Asia) |
Condition: |
Used – Inspected and in Good Condition |
Seller Notes: |
Unit only; no accessories included. Inspected and in good condition. |
Condition Notes: |
Network Peripherals NP-SET-210 NuSwitch FE-210 10-port Fast Ethernet switch. Inspected and in good condition. Light cosmetic wear consistent with prior use. All ports appear intact. |