Description
National Instruments PC-DIO-96 320289-01 DAQ User Manual Aug 1993
This is the original printed user manual for the National Instruments PC-DIO-96, a 96-bit parallel digital I/O interface card for the PC. Published in August 1993, Part Number 320289-01, this spiral-bound manual covers installation, configuration, and operation of the PC-DIO-96 DAQ board in detail. It is the authoritative reference for anyone setting up or maintaining this card.
Specifications & What's Included
- Manufacturer: National Instruments
- For Model: PC-DIO-96
- Document Type: User Manual
- Part Number / Publication Number: 320289-01
- Edition: August 1993
- Subject: 96-Bit Parallel Digital I/O Interface for the PC
- Format: Printed, spiral-bound booklet
- Language: English
- Copyright: 1990, 1994 National Instruments Corporation
Applications
The National Instruments PC-DIO-96 is an ISA-bus data acquisition card providing 96 lines of parallel digital I/O for the IBM PC and compatible systems. Cards of this type were widely used in laboratory automation, industrial control, and test-and-measurement environments during the early-to-mid 1990s, where large numbers of digital lines were needed to interface with external hardware such as relay banks, sensors, actuators, and custom test fixtures. National Instruments' NI-DAQ driver software supported the PC-DIO-96 under MS-DOS and early Windows platforms. This manual is the essential companion for anyone operating, configuring, or repairing a PC-DIO-96 board — covering hardware installation, register-level programming, and software configuration. It remains sought after by engineers and technicians maintaining legacy NI DAQ systems or integrating vintage PC-DIO-96 hardware into current test rigs.
This National Instruments PC-DIO-96 DAQ User Manual has been inspected and is in good used condition. The spiral binding is intact, all pages appear to be present and legible, and the cover shows only light shelf wear consistent with normal storage. This is the August 1993 edition, Part Number 320289-01. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
National Instruments |
Model: |
PC-DIO-96 |
MPN: |
320289-01 |
Type: |
User Manual |
SKU: |
28911 |
Document Type: |
User Manual |
Edition: |
August 1993 |
Part Number: |
320289-01 |
For Make/Brand: |
National Instruments |
For Model: |
PC-DIO-96 |
Subject: |
96-Bit Parallel Digital I/O Interface for the PC |
Language: |
English |
Format: |
Printed, Spiral-Bound |
Country/Region of Manufacture: |
United States |
Seller Notes: |
Original printed spiral-bound user manual, August 1993 edition, part no. 320289-01. |
Condition: |
Used – Inspected and in Good Condition |
Condition Notes: |
National Instruments PC-DIO-96 DAQ User Manual, Aug 1993 ed. (P/N 320289-01). Inspected and in good used condition — spiral binding intact, pages present and legible, light shelf wear only. |
