Merrimac

Merrimac FSCM12457 ARM-1 Variable Attenuator 0.3-22 dB 18 GHz SMA-F RF

(No reviews yet) Write a Review
SKU:
33918
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
1.00 LBS
Shipping:
Calculated at Checkout
  • Merrimac FSCM12457 ARM-1 variable attenuator — front/side view showing blue housing, two gold SMA-F connectors, top adjustment mechanism, and orange 'Not Subject to Recall' label
  • Merrimac FSCM12457 ARM-1 variable attenuator — angled left-side view showing top adjustment screw, one SMA-F port, barcode label reading NP 195941, and orange label
  • Merrimac FSCM12457 variable attenuator — end view showing single gold SMA-F female connector port on blue aluminum housing
  • Merrimac FSCM12457 ARM-1 variable attenuator — rear/side view showing two SMA-F connectors, top adjustment post, orange 'Not Subject to Recall' label, and mounting flange with hole
  • Merrimac FSCM12457 ARM-1 variable attenuator — close-up of engraved label panel showing MERRIMAC, ARM-1, LOT-13051, FSCM12457 with two gold SMA-F connectors visible
$45.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Merrimac FSCM12457 ARM-1 Variable Attenuator 0.3-22 dB 18 GHz SMA-F RF

The Merrimac FSCM12457 is a manually adjustable variable RF attenuator providing a continuous attenuation range of 0.3 to 22 dB across frequencies up to 18 GHz. The ARM-1 designation identifies the specific assembly version. It features two SMA female (SMA-F) coaxial connectors and is adjusted via a top-mounted screwdriver-slot mechanism, allowing precise attenuation setting in RF and microwave signal paths. The unit is housed in a compact, rugged blue anodized aluminum block with an integrated mounting flange.

Specifications & What's Included

  • Manufacturer: Merrimac
  • Part Number: FSCM12457
  • Assembly: ARM-1
  • Lot Number: LOT-13051
  • Type: Variable RF/Microwave Attenuator (manual adjustment)
  • Attenuation Range: 0.3 to 22 dB
  • Frequency Range: DC to 18 GHz
  • Connector Type: SMA-F (SMA Female), 2 ports
  • Adjustment: Top-mounted screwdriver-slot mechanism
  • Housing: Compact blue anodized aluminum block with mounting flange
  • Included: Attenuator unit only — no cables or accessories

Applications

Variable attenuators like the Merrimac FSCM12457 are standard components in RF and microwave test setups, used to control signal levels between instruments such as signal generators, spectrum analyzers, network analyzers, and devices under test. They are commonly used in lab bench testing, antenna and receiver characterization, radar and electronic warfare subsystem development, and satellite communications ground equipment. The SMA interface and 18 GHz frequency coverage make this attenuator suitable for microwave and millimeter-wave adjacent work across C, X, Ku, and lower Ka-band frequencies. Merrimac Industries was a US-based manufacturer of passive microwave components — couplers, dividers, attenuators, and phase shifters — widely used in defense and commercial RF applications from the 1970s through the early 2000s. Units like this are frequently found in military support equipment lots, consistent with the "Not Subject to Recall — Support Equipment" label visible on this unit.

Condition: Used
This Merrimac FSCM12457 ARM-1 variable RF attenuator has been inspected and appears to be in good used condition. It was pulled from a working environment where it was previously in service. The blue anodized aluminum housing shows light surface wear consistent with normal use, but no cracks, dents, or damage to the body. Both SMA-F connectors appear clean and intact, and the top adjustment mechanism is present and undamaged. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Merrimac
Model:
FSCM12457
Secondary Model:
ARM-1
MPN:
FSCM12457
SKU:
33918
Type:
Variable RF Attenuator
Attenuation Range:
0.3 to 22 dB
Frequency Range:
DC to 18 GHz
Connector Type:
SMA-F (Female)
Number of Ports:
2
Adjustment Type:
Manual / Screwdriver-adjust top mechanism
Housing / Form Factor:
Compact blue anodized aluminum block with flange
Lot Number:
LOT-13051
Seller Notes:
Attenuator only — no cables or accessories included.
Country/Region of Manufacture:
United States
Condition Notes:
This Merrimac FSCM12457 ARM-1 variable RF attenuator is in good used condition, pulled from a working environment. Housing shows light surface wear; SMA-F connectors and top adjustment mechanism are intact. Please contact us with any questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose