Description
Iomega Zip Drive Internal Z100ATAPI ATAPI2 100MB Dell 0003484D 04085D03
Internal 3.5-inch Zip drive with 100MB storage capacity. Uses ATAPI2 (IDE/ATAPI) interface for connection to compatible systems via standard IDE cable.
Specifications & What's Included
- Model: Z100ATAPI (Revision A02)
- Interface: ATAPI2 (IDE/ATAPI)
- Capacity: 100MB
- Form Factor: Internal 3.5-inch
- Power: +5V DC, 0.8A
- Jumper Configuration: Master, Slave, Cable Select (factory set to Cable Select)
- Dell OEM Part Number: 0003484D
Applications
Iomega Zip drives were used as removable storage devices in Dell and other OEM systems during the late 1990s and early 2000s. This ATAPI2 model connects directly to an IDE/ATAPI motherboard controller, common in systems predating USB-based storage. Zip drives served as backup and data transfer solutions before higher-capacity alternatives became standard. Compatible with Dell systems specified for Dell P/N 0003484D.
Condition: Used
This Iomega Z100ATAPI internal 100MB Zip drive (Dell P/N 0003484D) has been inspected and is in good used condition. The drive body and bezel are intact with normal light wear consistent with prior installation. The ATAPI2 ribbon connector and 4-pin power connector on the rear appear undamaged. The top label — including the jumper diagram and part number markings — is fully legible. No Zip disk, mounting hardware, or bezel is included. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
This Iomega Z100ATAPI internal 100MB Zip drive (Dell P/N 0003484D) has been inspected and is in good used condition. The drive body and bezel are intact with normal light wear consistent with prior installation. The ATAPI2 ribbon connector and 4-pin power connector on the rear appear undamaged. The top label — including the jumper diagram and part number markings — is fully legible. No Zip disk, mounting hardware, or bezel is included. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Iomega |
Model: |
Z100ATAPI |
MPN: |
0003484D |
Secondary Model: |
04085D03 |
Type: |
Internal Zip Drive |
Interface: |
ATAPI2 (IDE/ATAPI) |
Storage Capacity: |
100 MB |
Form Factor: |
Internal 3.5-inch |
Revision: |
Rev. A02 |
Power Requirements: |
+5V DC, 0.8A |
Country/Region of Manufacture: |
Malaysia |
Compatible With: |
Dell systems using Dell P/N 0003484D |
Jumper Configuration: |
Master, Slave, Cable Select (factory: Cable Select) |
Part Number 1: |
04085D02 |
Part Number 2: |
04085D01 |
Part Number 3: |
04085D03 |
OEM Part Number: |
04137D00 |
Condition: |
Used – Inspected |
SKU: |
29453 |
Seller Notes: |
Drive only; no Zip disk, bezel, or mounting hardware included. |
Condition Notes: |
Iomega Z100ATAPI 100MB internal Zip drive, Dell P/N 0003484D. Inspected and in good used condition. Normal light wear; ATAPI2 and power connectors intact. Drive only — no disk or mounting hardware. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
