Ideal

Ideal ITB-10 Terminal Strip Block 10-Circuit 30A 600V Barrier UL Listed 70066

(No reviews yet) Write a Review
SKU:
32301
MPN:
ITB-10
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
1.00 LBS
Shipping:
Calculated at Checkout
  • Ideal ITB-10 terminal strip block end view showing dual screw terminals with tape measure indicating approximately 1-1/4 inch width
  • Ideal ITB-10 label showing model number, 30A-600V rating, UL and CSA marks, and catalog number 70066
  • Ideal ITB-10 10-circuit barrier terminal strip block top view with tape measure showing approximately 6-5/8 inch length
  • Ideal ITB-10 close-up of screw terminals showing dual-screw barrier design and silver hardware in good condition
$11.70
Was: $25.00
Current Stock: 19

Sold Out

Description

Ideal ITB-10 Terminal Strip Block 10-Circuit 30A 600V Barrier UL Listed 70066

A 10-circuit barrier terminal strip block rated for 30A at 600V. This screw terminal component is used for distributing and terminating electrical connections in industrial control panels and telecom equipment.

Specifications & What's Included

  • 10 circuits, 30A current rating, 600V voltage rating
  • Screw terminal connections with thermoplastic body
  • UL Listed and CSA certified
  • Dimensions: 6-5/8" L x 1-5/16" W x 13/16" H
  • Model ITB-10, Catalog #70066, Made in USA

Applications

Barrier terminal strips are standard in industrial control systems, power distribution boards, and telecommunications equipment for organizing multiple circuit connections. These blocks are commonly found in switchgear, motor control centers, and equipment racks where secure screw-terminal connections are required. The 600V rating suits both low-voltage industrial and telecom applications.

Condition: Used
This Ideal ITB-10 Terminal Strip Block has been inspected and appears to be in good condition. It was pulled from a working environment where it was previously in use. The screw terminals and hardware look clean with no broken or stripped hardware visible. Normal light surface wear consistent with prior installation. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Ideal Industries
Model:
ITB-10
MPN:
ITB-10
Type:
Barrier Terminal Strip Block
SKU:
32301
Number of Circuits:
10
Current Rating:
30A
Voltage Rating:
600V
Catalog Number:
70066
Certifications:
UL Listed, CSA
Connection Type:
Screw Terminal
Body Material:
Thermoplastic
Dimensions:
6-5/8" L x 1-5/16" W x 13/16" H
Condition:
Used – Pulled from Working Environment
Country/Region of Manufacture:
United States
Seller Notes:
Terminal strip block only; inspected and in good condition.
Condition Notes:
Ideal ITB-10 Terminal Strip Block, used, inspected and in good condition. Pulled from a working environment. Screw terminals and hardware intact. Normal light wear from prior installation.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose

Related Products

Related Products

Phoenix Contact BK35/E 1-pole DIN rail terminal block – top and front view, gray thermoplastic housing Phoenix Contact BK35/E terminal block – angled rear/bottom view showing DIN rail mounting clips
Add to Cart
Quick view

Phoenix Contact BK35/E 1-Pole Terminal Block DIN Rail K35/E K35 UK35 600V 10A

Phoenix Contact

$5.00
Was: $10.00
Phoenix Contact BK35/E 1-Pole Terminal Block DIN Rail K35/E K35 UK35 600V 10ASingle-pole DIN rail-mounted terminal block with screw terminals for electrical connections in industrial control and...
46043
SKU:
46043
Availability:
Usually ships within 1-2 business days.
Weight:
1.00 LBS
Brand:
Phoenix Contact
Model:
BK35/E
MPN:
BK35/E
Type:
DIN Rail Terminal Block
SKU:
46043
Number of Poles:
1
Voltage Rating:
600V
Current Rating:
10A
Mounting Type:
DIN Rail
Compatible With:
K35/E, K35, UK35
Terminal Type:
Screw Terminal
Color:
Gray
Material:
Thermoplastic
Certifications:
UL, CSA, VDE
Condition:
Used – Inspected and Tested
Country/Region of Manufacture:
Germany
Seller Notes:
Single 1-pole terminal block; no additional accessories included.
Condition Notes:
Phoenix Contact BK35/E 1-Pole DIN Rail Terminal Block. Inspected and in good condition. Housing intact, screw terminals and conductor bar undamaged, light surface soiling only.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Cooper Bussmann PDBFS330 Cu7 Power Distribution Block – angled front-left view showing DIN rail mount and attached lead wires Cooper Bussmann PDBFS330 Cu7 Power Distribution Block – front face showing label with 600V 380A rating and 3/8 and 1/8 HEX callouts
Add to Cart
Quick view

Cooper Bussmann PDBFS330 Cu7 Power Distribution Block 600V 380A 3/8 1/8 Hex

Cooper Bussmann

$40.00
Was: $80.00
Cooper Bussmann PDBFS330 Cu7 Power Distribution Block 600V 380A 3/8 1/8 HexPower distribution block for industrial and telecom applications. Distributes high-current power from a single source to...
53152
SKU:
53152
Availability:
Usually ships within 1-2 business days.
Weight:
1.00 LBS
Brand:
Cooper Bussmann
Model:
PDBFS330
MPN:
PDBFS330 Cu7
Type:
Power Distribution Block
SKU:
53152
Voltage Rating:
600V
Current Rating:
380A
Conductor Material:
Copper (Cu7)
Line Side Wire Range:
500-6 AWG (240-16mm2)
Load Side Wire Range:
2-14 AWG (35-2.5mm2)
Line Side Torque:
500 lb-in (56.5 Nm)
Load Side Torque Spec:
35-50 lb-in (4.0-5.7 Nm)
Line Side Tool:
3/8 HEX
Load Side Tool:
1/8 HEX
Mounting Type:
DIN Rail
Standards:
IEC 947-7-1, UL Listed
Certifications:
UL Listed, CE, CSA
Country/Region of Manufacture:
Mexico
SCCR (2-6 AWG / Class J fuse):
200kA at 400A max
SCCR (2-14 AWG / Class J fuse):
50kA at 200A max; 100kA at 175A
Condition:
Used – Pulled from Working Environment
Seller Notes:
Unit includes two short lead wires attached to load side terminals.
Condition Notes:
Used Cooper Bussmann PDBFS330 Cu7 Power Distribution Block, pulled from a working environment. Inspected and in good condition. Light rust on DIN rail base; terminals clear. Two short lead wires attached. See photos.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Three PBX rackmount gold connector terminal strip blocks shown together from above at an angle Close-up angled view of two PBX rackmount gold connector blocks showing gold terminal pins and multicolor wiring
Add to Cart
Quick view

PBX Rackmount Gold Connector Block Terminal Strip Telecom Wiring Panel Lot

Rackmount

$17.80
Was: $40.00
PBX Rackmount Gold Connector Block Terminal Strip Telecom Wiring Panel LotGold-plated rackmount terminal strip block designed for PBX telephone system wiring and telecom installations. Routes and...
21569
SKU:
21569
Availability:
Usually ships within 1-2 business days.
Weight:
15.00 LBS
Brand:
Unbranded
Model:
PBX Rackmount Gold Connector Block
Type:
PBX Connector Terminal Strip Block
SKU:
21569
Form Factor:
Rack Mount
Application:
PBX Telephone System Wiring / Telecom
Connector Material:
Gold-plated
Seller Notes:
Price is for 1 of the 3 rackmount units shown in photos
Compatible With:
PBX telephone systems, telecom wiring panels
Condition Notes:
These PBX rackmount gold connector terminal strip blocks have been inspected and appear to be in good used condition. They were pulled from a working telecom environment.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov