Description
IBM 134-1984 20-Pin Edge Connector Floppy Drive Ribbon Cable Straight Through 62cm
The IBM 134-1984 is a 20-pin straight-through ribbon cable designed for connecting floppy disk drives in IBM PC-compatible systems. It features two 20-pin IDC edge connectors and a gray flat ribbon approximately 62 cm (about 24 inches) in length, with a red stripe along one edge marking pin 1.
Specifications & What's Included
- Part Number: IBM 134-1984
- Cable Type: Straight-through ribbon cable
- Connector Type: 20-pin IDC edge connector (dual row), both ends
- Pin Count: 20 pins
- Cable Length: 62 cm (approximately 24 inches)
- Pin 1 Identifier: Red stripe along one edge of ribbon
- Configuration: Straight through (no twist)
Applications
This cable is designed for early IBM PC, XT, AT, and compatible systems that used 20-pin edge-style floppy drive connectors, which were common on full-height and half-height 5.25-inch floppy disk drives from the late 1970s through the mid-1980s. The 20-pin edge connector format was an earlier IBM standard before the 34-pin IDC connector became the dominant interface for PC floppy drives. These cables are now sought after by vintage computing enthusiasts and technicians restoring or maintaining early IBM PC hardware, where original connector types must be matched exactly. The straight-through configuration passes all signals directly between the motherboard or floppy controller card and the drive with no twist.
This IBM 134-1984 20-pin floppy drive ribbon cable has been inspected and is in good used condition. The cable is clean and intact with no visible damage to the ribbon or connectors. Both 20-pin IDC edge connectors are present and show no bent or missing pins. Normal handling wear is present consistent with a vintage cable. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
IBM |
Model: |
134-1984 |
MPN: |
134-1984 |
Type: |
Floppy Drive Ribbon Cable |
SKU: |
48855 |
Connector Type: |
20-Pin Edge Connector (IDC) |
Pin Count: |
20 |
Cable Configuration: |
Straight Through |
Cable Length: |
62 cm (approx. 24 in) |
Compatible With: |
IBM PC, XT, AT and compatible 20-pin floppy drives |
Conductor Count: |
20 |
Country/Region of Manufacture: |
United States |
Seller Notes: |
Cable only — no additional accessories included. |
Condition Notes: |
This IBM 134-1984 20-pin floppy drive ribbon cable has been inspected and is in good used condition. Cable and both connectors are intact with no damage. Normal wear for a vintage cable. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
