Description
IBM 134-1731 20-Pin to 20-Pin Floppy Drive Ribbon Cable 25cm Flat Ribbon
Flat ribbon cable for connecting IBM floppy disk drives with 20-pin IDC connectors. This cable transfers data and control signals between the drive and system motherboard or controller card.
Specifications & What's Included
- Brand: IBM
- Model/MPN: 134-1731
- Connector Type: 20-Pin IDC to 20-Pin IDC
- Cable Length: 25cm (approximately 10 inches)
- Cable Style: Flat Ribbon
- Manufactured in Japan
- Cable only
Applications
This cable connects 20-pin floppy disk drives to IBM computer systems, including vintage IBM PC models and industrial equipment using standard floppy interfaces. The 25cm length accommodates typical drive-to-motherboard or drive-to-controller distances in compact and standard system enclosures. Commonly used in legacy IBM systems and retro computing setups requiring 3.5-inch or 5.25-inch floppy drive connectivity.
Condition: Used
This IBM 134-1731 20-pin floppy drive ribbon cable has been inspected and is in good used condition. It was pulled from a working IBM system. The ribbon is intact with no cuts, kinks, or broken conductors visible. Both 20-pin IDC connectors are present and undamaged, with no bent or missing pins. The part number label on the connector is clean and fully legible. Please view our photo set and contact us if you have any questions.
This IBM 134-1731 20-pin floppy drive ribbon cable has been inspected and is in good used condition. It was pulled from a working IBM system. The ribbon is intact with no cuts, kinks, or broken conductors visible. Both 20-pin IDC connectors are present and undamaged, with no bent or missing pins. The part number label on the connector is clean and fully legible. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
IBM |
Model: |
134-1731 |
MPN: |
134-1731 |
Type: |
Floppy Drive Ribbon Cable |
SKU: |
48854 |
Connector Type: |
20-Pin IDC to 20-Pin IDC |
Number of Pins: |
20 |
Cable Length: |
25cm (approximately 10 inches) |
Cable Style: |
Flat Ribbon |
Compatible With: |
IBM floppy disk drives (20-pin interface) |
Seller Notes: |
Cable only. Pulled from a working IBM system. |
Country/Region of Manufacture: |
Japan |
Condition: |
Used – Pulled from Working Environment |
Condition Notes: |
IBM 134-1731 20-pin floppy drive ribbon cable in good used condition. Pulled from a working IBM system. Ribbon intact, both IDC connectors undamaged, no bent or missing pins. Please view photos and contact us with questions. |
