Description
HP Epson SMD-349 D1667-60001 1.44MB 3.5" Floppy Disk Drive No Bezel
The HP D1667-60001 is a 1.44MB 3.5" internal floppy disk drive manufactured by Epson (model SMD-349) to Hewlett-Packard standards. It uses the standard 34-pin floppy interface and 4-pin Berg power connector found in virtually all IBM-compatible desktop PCs of its era, making it a straightforward drop-in replacement in systems that require a 3.5" FDD. Note that the front bezel is not included with this drive.
Specifications & What's Included
- HP Part Number: D1667-60001
- OEM Manufacturer / Model: Epson SMD-349
- Capacity: 1.44 MB
- Form Factor: 3.5" internal
- Interface: 34-pin floppy ribbon cable connector
- Power: 4-pin Berg (floppy power) — DC +5V / 1A
- Country of Manufacture: Japan
- Bezel: Not included
- Drive only — no cables or mounting hardware included
Applications
The 3.5" 1.44MB floppy disk drive was the dominant removable storage medium in IBM-compatible desktop PCs from the late 1980s through the early 2000s. Drives like this one were used for software installation, data transfer, and system boot media throughout that era. HP sourced the SMD-349 from Epson — a major OEM supplier of floppy mechanisms — and branded it under the HP part number D1667-60001 for use in HP Vectra, HP Pavilion, and other HP desktop systems of the period. Today these drives are sought after for legacy system maintenance, vintage PC restoration, and industrial or embedded systems (such as CNC machines, medical instruments, and laboratory equipment) that still rely on 3.5" floppy media for parameter storage or firmware loading.
This HP Epson SMD-349 (D1667-60001) 1.44MB 3.5" floppy disk drive has been tested and is in good working condition. The drive is missing its front bezel, as shown in the photos. The chassis and mechanism show typical wear from previous use. Please review our photos and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
HP |
Model: |
SMD-349 |
MPN: |
D1667-60001 |
Secondary Model: |
Epson SMD-349 |
SKU: |
17041 |
Type: |
Internal 3.5" Floppy Disk Drive |
Storage Capacity: |
1.44 MB |
Form Factor: |
3.5" Internal |
Interface: |
34-Pin Floppy |
Bezel Included: |
No |
Power Connector: |
4-Pin Berg (Floppy Power) |
Power Requirements: |
DC +5V / 1A |
Country/Region of Manufacture: |
Japan |
Seller Notes: |
Drive only — no bezel, no cables, no mounting hardware included. |
Condition Notes: |
This HP Epson SMD-349 (D1667-60001) 1.44MB 3.5" floppy drive has been tested and is in good working condition. No bezel included. Shows normal wear. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
