Heller

Heller 1088EXL SMT Reflow Oven 18" Mesh Conveyor 208/240V 3-Phase with PC

(No reviews yet) Write a Review
SKU:
52142
MPN:
1088 EXL
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
1,111.00 LBS
Shipping:
Calculated at Checkout
  • Heller 1088EXL SMT reflow oven front three-quarter view with lid closed, controller PC and stack light visible
  • Heller 1088EXL reflow oven with top lid raised open, showing internal heating zone panels and mesh conveyor belt
  • Dell monitor displaying Heller Operating Program software in cooldown mode — controller PC keyboard and mouse included
  • Heller Operating Program software screen close-up showing 1088 COOLDOWN mode, zone SP and PV temperature fields, and belt speed setting
  • Rear-end view of Heller 1088EXL showing Dell controller PC on sliding shelf, conveyor exit end, cooling fans, and PC tower in lower drawer
  • Board exit end of Heller 1088EXL showing mesh conveyor belt, emergency stop button, and warning label
  • Full side view of Heller 1088EXL reflow oven from board entry end, showing stack light tower and controller PC on right
  • Internal electrical panel of Heller 1088EXL with circuit breakers, contactors, terminal blocks, control boards, and power supply
  • Heller Industries nameplate showing model 1088EXL, serial 0804DA7A1-39564-01, 208/240V 60A 3-phase 50/60Hz, manufactured August 2004
  • Interior view with top lid open showing perforated top heating element panels and stainless mesh conveyor belt below
  • Close-up of heating element panel underside showing quartz heating elements, ceramic insulators, and perforated diffuser plate
  • Close-up of quartz heating element rod with ceramic support insulators and coiled spring tension assembly on conveyor side rail
  • Detail view of quartz heating element coil and ceramic insulator mounting hardware along the conveyor edge
$4,564.00
Was: $10,000.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Heller 1088EXL SMT Reflow Oven 18" Mesh Conveyor 208/240V 3-Phase with PC

The Heller 1088EXL is a floor-standing convection SMT reflow oven designed for soldering surface-mount components onto PCBs in a production environment. It uses a mesh belt conveyor to carry boards through four independently controlled heating zones — top and bottom heating in each zone — allowing precise thermal profile management across the full reflow cycle. This unit includes the dedicated controller PC with Heller Operating Program software pre-loaded.

Specifications & What's Included

  • Manufacturer: Heller Industries Inc., Florham Park, NJ
  • Model: 1088EXL
  • Serial Number: on file (see nameplate)
  • Manufactured: August 2004
  • Power: 208/240V AC, 60A, 3-Phase, 50/60Hz (dual voltage)
  • Largest Heater Load: 25A
  • Short-Circuit Interrupting Capacity: 5,000A
  • Electrical Drawing: B-813344-01
  • Heating Zones: 4 zones, top and bottom heating per zone
  • Conveyor: 18" wide stainless mesh belt
  • Total Length: 93 inches
  • Overall Dimensions: 93" Long x 34" Wide x 52" Tall (with safety disconnect)
  • Conveyor speed: adjustable (Belt 1 setting visible in control software)
  • Stack light (tri-color tower indicator) mounted on oven
  • Internal electrical panel: circuit breakers, contactors, terminal blocks, control boards, switching power supply
  • Quartz heating elements with ceramic insulators visible in interior photos
  • Includes: controller PC (Dell monitor, keyboard, mouse, tower PC) with Heller Operating Program software
  • Oven runs on casters for positioning

Applications

The Heller 1088EXL is a production-grade convection reflow oven used in SMT (surface-mount technology) PCB assembly lines. In the SMT process, solder paste is screen-printed onto bare boards, components are placed by a pick-and-place machine, and the board then travels through the reflow oven on the mesh belt conveyor. The oven's heating zones bring the board through preheat, soak, reflow, and cooling stages, melting the solder paste and forming reliable solder joints. The 4-zone top/bottom architecture allows operators to program independent temperature setpoints for each zone, making it possible to dial in precise thermal profiles for lead-free or tin-lead solder pastes and mixed-component assemblies. The 18" belt width accommodates a wide range of board sizes, making this oven suited for mid-to-high-volume production runs. The Heller 1088 series was a widely used platform in contract electronics manufacturing (CEM) shops and OEM assembly lines throughout the 2000s. Units like this one remain fully serviceable and are commonly purchased by electronics manufacturers, prototyping shops, and engineering labs looking for proven SMT reflow capability without the cost of new equipment.

Condition: Used
This Heller 1088EXL SMT Reflow Oven has been powered on and tested at our facility. We loaded a program from the included controller PC, the oven came to life, and it began heating up quickly — confirming the heating system and control software are functional. We were not able to run a complete production cycle test beyond that point. The oven is in good used condition overall; cosmetically it shows typical wear for a production floor machine. The electrical panel, heating elements, mesh conveyor, and controller PC are all present and appear intact. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Heller Industries
Model:
1088EXL
MPN:
1088EXL
Type:
SMT Reflow Oven
SKU:
52142
Seller Notes:
Includes controller PC (Dell monitor, keyboard, mouse, tower)
Country/Region of Manufacture:
United States
Power Requirements:
208/240V AC, 60A, 3-Phase, 50/60Hz
Voltage:
208/240V AC
Amperage:
60A
Phase:
Three Phase
Frequency:
50/60Hz (Dual Voltage)
Largest Heater Load:
25A
Short-Circuit Interrupting Capacity:
5000A
Electrical Drawing:
B-813344-01
Number of Heating Zones:
4 Zones (Top and Bottom)
Conveyor Type:
18" Mesh Belt Conveyor
Conveyor Width:
18 inches
Total Length:
93 inches
Overall Dimensions:
93" L x 34" W x 52" H (safety disconnected)
Manufacture Date:
August 2004
Application:
SMT PCB Solder Reflow, Surface Mount Technology
Form Factor:
Freestanding / Floor-Standing
Control System:
Included controller PC with Heller Operating Program software
Condition Notes:
This Heller 1088EXL SMT Reflow Oven has been powered on and tested — a program was run from the included controller PC and the oven powered up and began heating normally. Full production cycle testing was not performed. Good used condition.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose