Cisco

Cisco WS-C2960-24TT-L Catalyst 2960 24-Port 10/100 Switch 2 Gigabit Uplink

(No reviews yet) Write a Review
SKU:
40160
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
8.00 LBS
Shipping:
Calculated at Checkout
  • Cisco WS-C2960-24TT-L Catalyst 2960 24-port switch — front 3/4 view showing full chassis with power cord attached
  • Cisco Catalyst 2960 switch front-left panel close-up showing Cisco Systems logo, LED status indicators (SYST, RPS, STAT, DUPLX, SPEED) all green, and MODE button
  • Cisco WS-C2960-24TT-L front panel straight-on view showing 24 RJ-45 10/100 ports in two banks plus 2 uplink ports and Catalyst 2960 Series label
  • Cisco Catalyst 2960 Series front panel close-up of two RJ-45 uplink ports labeled 1 and 2
  • Cisco WS-C2960-24TT-L rear panel view showing Console RJ-45 port, RPS connector, ventilation slots, and IEC AC power inlet
  • Cisco WS-C2960-24TT-L rear panel label close-up showing model WS-C2960-24TT-L V02 and serial number barcode sticker
  • Cisco WS-C2960-24TT-L rear panel close-up showing IOS version 12.2(25)SEE2 label, RPS +12V/6.5A connector, and power rating 100-240V 1.3A-8A 50-60Hz
  • Cisco WS-C2960-24TT-L bottom regulatory label showing model number, Cisco Systems manufacturer info, and manufacture date 2006/10/02 Made in China
$300.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Cisco WS-C2960-24TT-L Catalyst 2960 24-Port 10/100 Switch 2 Gigabit Uplink

The Cisco WS-C2960-24TT-L is a Layer 2 managed switch from the Catalyst 2960 Series, providing 24 Fast Ethernet (10/100 Mbps) access ports and 2 Gigabit Ethernet uplink ports in a 1U rackmount form factor. It runs the Cisco IOS LAN Base software image, supporting VLAN segmentation, Spanning Tree Protocol (STP), port security, QoS, and basic Layer 2 management features via CLI, Telnet, or SSH. This unit is hardware version V02 and runs IOS 12.2(25)SEE2.

Specifications & What's Included

  • Model: WS-C2960-24TT-L (Catalyst 2960 Series)
  • Hardware Version: V02
  • IOS Version: 12.2(25)SEE2 — LAN Base image
  • Access Ports: 24 x 10/100 Mbps RJ-45 (auto-sensing)
  • Uplink Ports: 2 x 10/100/1000 Mbps RJ-45 (Gigabit)
  • Total Ports: 26
  • Switching Layer: Layer 2
  • Console Port: RJ-45 (rear panel)
  • RPS Connector: +12V, 6.5A (rear, for optional redundant power supply)
  • Form Factor: 1U Rackmount
  • Power Input: 100–240V~, 1.3A–8A, 50–60Hz (IEC C14 inlet)
  • Manufacture Date: October 2, 2006
  • Country of Manufacture: China
  • LED Indicators: SYST, RPS, STAT, DUPLX, SPEED (front panel, with MODE button)

Applications

The Cisco Catalyst 2960 Series is one of the most widely deployed Layer 2 fixed-configuration access switches in enterprise, campus, and SMB networking. The WS-C2960-24TT-L variant — with 24 Fast Ethernet ports and dual Gigabit uplinks — is a standard wiring-closet switch designed to aggregate desktop and IP phone connections and uplink to a distribution-layer switch or router. The LAN Base IOS image supports VLAN configuration, Rapid STP, port-based QoS, 802.1x authentication, and Cisco's Smart Port technology. The 2960 series was introduced in the mid-2000s and remained in mainstream production through the early 2010s; these switches are now common in the secondary market, widely used in small business networks, home labs, VoIP deployments, and legacy enterprise environments where Gigabit-to-the-desktop is not required. The dual Gigabit uplinks allow the switch to connect at full 1 Gbps to a core or distribution layer while serving 24 Fast Ethernet access connections at the edge.

Condition: Used
This Cisco WS-C2960-24TT-L Catalyst 2960 Series managed network switch was pulled from a working environment where it was previously in use. It has been visually inspected and photographed. The chassis shows normal wear for used rack equipment — minor scuffing on the top and side surfaces. The front-panel LEDs (SYST, RPS, STAT, DUPLX, SPEED) are all illuminated green in the photos. The rear label confirms hardware version V02 and IOS version 12.2(25)SEE2. Some cosmetic wear is expected on surplus equipment of this age; please review all photos for a complete picture of the unit's condition. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Cisco
Model:
WS-C2960-24TT-L
MPN:
WS-C2960-24TT-L
Secondary Model:
WS-C2960-24TT
SKU:
40160
Type:
Managed Network Switch
Series:
Catalyst 2960
Number of Ports:
26 (24x 10/100 + 2x 10/100/1000 uplink)
LAN Ports:
24 x 10/100 RJ-45
Uplink Ports:
2 x 10/100/1000 RJ-45
Port Speed:
10/100 Mbps (access); 10/100/1000 Mbps (uplink)
Switching Layer:
Layer 2
IOS Image:
LAN Base
IOS Version:
12.2(25)SEE2
Form Factor:
1U Rackmount
Power Requirements:
100-240V~, 1.3A–8A, 50-60Hz
Management Type:
Managed
Console Port:
RJ-45
Hardware Version:
V02
Manufacture Date:
2006/10/02
Country/Region of Manufacture:
China
Seller Notes:
Switch only — no rack ears, cables, or power cord guaranteed
Condition Notes:
This Cisco WS-C2960-24TT-L Catalyst 2960 managed switch was pulled from a working environment. Visually inspected; normal wear for used rack equipment. Front-panel LEDs show green in photos. HW V02, IOS 12.2(25)SEE2.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose