Cisco
-
Cisco SG250-26P 26-Port Gigabit PoE Smart Switch 52Gbps Layer 3 Rackmount
Cisco
$85.00Was: $175.00Cisco SG250-26P 26-Port Gigabit PoE Smart Switch 52Gbps Layer 3 RackmountManaged Layer 3 switch with 24 Gigabit PoE ports and 2 SFP uplink ports. Provides 52 Gbps switching capacity and supports...52849- SKU:
- 52849
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 13.00 LBS
- Brand:
- Cisco
- Model:
- SG250-26P
- MPN:
- SG250-26P-K9
- Type:
- Managed Gigabit PoE Smart Switch
- SKU:
- 52849
- Number of Ports:
- 26 (24x RJ45 Gigabit PoE + 2x SFP Gigabit)
- PoE Ports:
- 24
- Switching Capacity:
- 52.0 Gbps
- Forwarding Rate:
- 38.69 Mpps
- Layer:
- Layer 3
- Routing:
- Static Routing
- Management Type:
- Managed (Smart Switch)
- VLAN Support:
- Yes
- IPv6 Support:
- Yes
- QoS:
- Yes
- Network Security:
- Yes
- IP Telephony Support:
- Yes
- Form Factor:
- Rack Mount, 1U
- Power Requirements:
- 100-240V, 50-60Hz, 3500-1750mA
- Connector Type:
- RJ45, SFP
- Uplink Ports:
- 2x SFP Gigabit
- Compatible With:
- Cisco 250 Series Smart Switch family
- Network Protocol:
- Gigabit Ethernet, IEEE 802.3af/at PoE
- Country/Region of Manufacture:
- China
- Seller Notes:
- Includes rackmount ears. Power cable not confirmed included.
- Condition:
- Used – Pulled from Working Environment
- Condition Notes:
- Cisco SG250-26P 26-Port Gigabit PoE Smart Switch. Inspected and in good condition. Pulled from a working environment. Rackmount ears included. Normal cosmetic wear. Please contact us with any questions.
$85.00Was: $175.00 -
Cisco MEM2600-16D 2600 Series 16MB DRAM DIMM Memory Upgrade Open Box
Cisco
$20.00Was: $40.00Cisco MEM2600-16D 2600 Series 16MB DRAM DIMM Memory Upgrade Open BoxThe Cisco MEM2600-16D is a 16MB DRAM DIMM memory upgrade designed for the Cisco 2600 Series modular access routers. Manufactured by...30271- SKU:
- 30271
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Cisco
- Model:
- MEM2600-16D
- MPN:
- MEM2600-16D=
- Type:
- DRAM DIMM Memory Upgrade
- SKU:
- 30271
- Capacity:
- 16 MB
- Memory Type:
- DRAM
- Form Factor:
- DIMM
- Compatible With:
- Cisco 2600 Series Routers
- Cisco Part Number:
- 15-2853-01
- Revision:
- A0
- Manufacturer:
- SMART Modular Technologies
- Assembled In:
- USA
- Seller Notes:
- New open-box; includes original Cisco configuration note and 3M 2209 disposable wrist strap
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Cisco MEM2600-16D 16MB DRAM DIMM. New/unused module in opened original Cisco packaging. Includes Cisco configuration note and 3M 2209 wrist strap. Please view photos and contact us with questions.
$20.00Was: $40.00 -
Cisco NM-1E1R2W Network Module 1 Ethernet 1 Token Ring 2 WAN Slots
Cisco
$300.00Was: $704.00Cisco NM-1E1R2W Network Module 1 Ethernet 1 Token Ring 2 WAN SlotsThe NM-1E1R2W is a mixed-media network module designed for Cisco 3600 Series routers, providing flexible multi-protocol connectivity...11887- SKU:
- 11887
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Cisco
- Model:
- NM-1E1R2W
- Type:
- Network Interface Card / Router Module
- SKU:
- 11887
- Condition:
- Used
- Compatible With:
- Cisco 3600 Series Routers
- Ethernet Interface:
- 10BaseT RJ-45 and AUI (selectable)
- Token Ring Interface:
- DB-9 and RJ-45 ports (selectable)
- WAN Interface Slots:
- 2 WIC slots
- Interface Type:
- Ethernet, Token Ring, WAN
- Form Factor:
- Router Module Card
- Condition Notes:
- Cisco NM-1E1R2W network module in used, good condition. Pulled from working environment. Features Ethernet, Token Ring, and 2 WAN slots. Compatible with Cisco 3600 routers.
$300.00Was: $704.00 -
Cisco CAB-V.35MT-10 V.35 Serial Cable DTE Male 10ft 7000 3600 2500 1600
Cisco
$12.00Was: $25.00Cisco CAB-V.35MT-10 V.35 Serial Cable DTE Male 10ft 7000 3600 2500 1600V.35 DTE serial cable for connecting Cisco routers to CSU/DSU equipment over WAN connections. 10 feet in length with V.35 male...38759- SKU:
- 38759
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Cisco
- Model:
- CAB-V.35MT-10
- MPN:
- CAB-V.35MT-10
- Secondary Model:
- CAB-V35MT
- Type:
- V.35 DTE Serial Cable
- SKU:
- 38759
- Cable Length:
- 10 ft (3.05 m)
- Connector A:
- V.35 Male DTE (Winchester/Smart Serial)
- Connector B:
- Smart Serial (Cisco proprietary router end)
- Interface Type:
- V.35
- DTE/DCE:
- DTE
- Compatible With 1:
- Cisco 7000 Series Routers
- Compatible With 2:
- Cisco 3600 Series Routers
- Compatible With 3:
- Cisco 2500 Series Routers
- Compatible With 4:
- Cisco 1600 Series Routers
- Application:
- WAN Serial / Router to CSU/DSU Connection
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Cable only; no additional accessories included.
- Country/Region of Manufacture:
- Mexico
- Condition Notes:
- Cisco CAB-V.35MT-10 V.35 DTE serial cable inspected and in good condition. Pulled from a working environment. Cable jacket intact, both connectors clean, gold pins straight and undamaged.
$12.00Was: $25.00 -
Cisco WIC-1DSU-56K4 WAN Interface Card 56/64K DSU/CSU 74-0573-05 Series 2600
Cisco
$18.00Was: $40.00Cisco WIC-1DSU-56K4 WAN Interface Card 56/64K DSU/CSU 74-0573-05 Series 2600A WAN interface card for Cisco routers that provides 56/64 Kbps DSU/CSU connectivity. This module installs into compatible...37157- SKU:
- 37157
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.95 LBS
- Brand:
- Cisco
- Model:
- WIC-1DSU-56K4
- MPN:
- 74-0573-05
- Type:
- WAN Interface Card (WIC)
- SKU:
- 37157
- Interface Type:
- 56/64K DSU/CSU
- Data Rate:
- 56 Kbps / 64 Kbps
- Connector Type:
- RJ-48 (single port, front panel)
- Compatible With 1:
- Cisco 2600 Series Routers
- Compatible With 2:
- Cisco 2610, 2611, 2620, 2621, 2650, 2651
- Compatible With 3:
- Cisco 1700, 2800, 3700 Series (select models)
- Form Factor:
- WIC Module / Card
- Number of Ports:
- 1
- Management Type:
- Managed
- LED Indicators:
- TD, RD, LP, AL, CD
- Condition:
- Used – Inspected and Pulled from Working Environment
- Seller Notes:
- Card only; no cables or accessories included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Cisco WIC-1DSU-56K4 56/64K DSU/CSU WAN Interface Card. Inspected and in good condition. Normal light wear from prior use. Faceplate and RJ-48 port intact. PCB shows no visible damage.
$18.00Was: $40.00 -
Cisco WIC-1B-U 1-Port ISDN BRI NT-1 WAN Interface Card Rev K0 800-01834-03
Cisco
$20.00Was: $250.00Cisco WIC-1B-U 1-Port ISDN BRI NT-1 WAN Interface Card Rev K0 800-01834-03WAN Interface Card (WIC) that provides a single ISDN BRI port with NT-1 functionality for Cisco routers. Connects via RJ-45...30301- SKU:
- 30301
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Cisco
- Model:
- WIC-1B-U
- MPN:
- 800-01834-03
- Secondary Model:
- 800-01834-03A0
- Hardware Revision:
- Rev -K0
- Type:
- WAN Interface Card (WIC)
- SKU:
- 30301
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes Software Configuration Guide and WAN Interface Cards Hardware Installation Guide
- Country/Region of Manufacture:
- United States
- Form Factor:
- Card / Module
- Interface Type:
- ISDN BRI with NT-1
- Number of Ports:
- 1
- Connector Type:
- RJ-45 (ISDN BRI)
- Compatible With 1:
- Cisco 1700 Series Routers
- Compatible With 2:
- Cisco 2600 Series Routers
- Compatible With 3:
- Cisco 3600 Series Routers
- Compatible With 4:
- Cisco 1600 Series Routers
- Protocol:
- ISDN BRI
- Management Type:
- Managed (Cisco IOS)
- Chipset:
- Lattice isp2032A 135LT44
- IOS Compatibility:
- Cisco IOS 12.1(3)XI2 and later
- Condition Notes:
- Cisco WIC-1B-U ISDN BRI WAN Interface Card pulled from a working environment where it was in use and functional. Inspected and in good condition with light service wear. Includes software config guide and hardware installation guide.
$20.00Was: $250.00 -
Cisco 72-0789-01 X.21 DTE Cable V1285 Male to DB60 Male 10ft WAN Serial
Cisco
$18.00Was: $40.00Cisco 72-0789-01 X.21 DTE Cable V1285 Male to DB60 Male 10ft WAN SerialThe Cisco 72-0789-01 is a 10-foot X.21 DTE serial cable connecting a V1285 male plug on one end to a DB60 male connector on the...22142- SKU:
- 22142
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Cisco
- Model:
- 72-0789-01
- MPN:
- 72-0789-01
- Type:
- X.21 DTE Serial Cable
- SKU:
- 22142
- Connector A:
- V1285 Male (V.11 / X.21 DTE)
- Connector B:
- DB60 Male
- Cable Length:
- 10 ft (approximately 3 m)
- Interface Type:
- X.21 / V.11 DTE
- Cable Standard:
- X.21 DTE
- Compatible With:
- Cisco WAN interface cards and serial routers
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Cable only; no accessories included.
- Country/Region of Manufacture:
- Mexico
- Condition Notes:
- Cisco 72-0789-01 X.21 DTE cable inspected and in good condition. Pulled from a working environment. Jacket intact, both connectors clean and undamaged. Please contact us with any questions.
$18.00Was: $40.00 -
Cisco 72-0740-02 V.35 DCE Cable Rev B1 AMP Female to 50-Pin Male 9ft
Cisco
$14.00Was: $30.00Cisco 72-0740-02 V.35 DCE Cable Rev B1 AMP Female to 50-Pin Male 9ftThis is a Cisco 72-0740-02 V.35 DCE serial cable, Revision B1, used to connect WAN serial interfaces on Cisco routers to DCE...22136- SKU:
- 22136
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 10.00 LBS
- Brand:
- Cisco
- Model:
- 72-0740-02
- MPN:
- 72-0740-02
- Type:
- V.35 DCE Serial Cable
- SKU:
- 22136
- Revision:
- Rev B1
- Interface Type:
- V.35
- Signal Type:
- DCE
- Connector A:
- AMP Female (DB-style, 34-pin V.35 block)
- Connector B:
- 50-Pin Male
- Cable Length:
- Approximately 9 ft (approx. 2.7 m)
- Compatible With:
- Cisco WAN serial interface routers
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Cable only — no additional accessories included.
- Country/Region of Manufacture:
- Unknown
- Condition Notes:
- Cisco 72-0740-02 V.35 DCE Cable — inspected and in good used condition. Cable jacket intact, connectors clean and undamaged. Normal handling wear present.
$14.00Was: $30.00