BTU International

BTU International VIP98N 7-Zone SMT Reflow Oven 300°C 208V 3Ph 107A 14 Ft

(No reviews yet) Write a Review
SKU:
44788
MPN:
VIP98N
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
3,100.00 LBS
Shipping:
Calculated at Checkout
  • BTU International VIP98N 7-zone SMT reflow oven – full left-side view showing white enclosure and blue stripe
  • BTU International VIP98N reflow oven – right-side operator panel view with VIP98 nameplate and BTU logo
  • BTU VIP98N SMT reflow oven – right-side close-up showing VIP98 model label, BTU logo badge, and operator controls
  • BTU VIP98N reflow oven – close-up of front operator control panel with emergency stop, push buttons, and BTU logo
  • BTU VIP98N reflow oven – underside interior view showing conveyor mesh belt, wiring harness, and zone components
  • BTU VIP98N reflow oven – underside interior detail showing zone motor assemblies, wiring, and perforated conveyor belt
  • BTU VIP98N reflow oven – exit end view showing conveyor belt discharge and cabinet access panels open
  • BTU VIP98N reflow oven – exit conveyor belt close-up showing stainless mesh belt and drive rollers
  • BTU VIP98N reflow oven – top interior panel open showing four zone blower motors with Caution labels
  • BTU VIP98N reflow oven – close-up of two zone blower motors with wiring terminals and Warning/Caution labels
  • BTU VIP98N reflow oven – close-up of single Reliance Electric zone blower motor with cage guard and wiring
  • BTU VIP98N reflow oven – Reliance Electric motor nameplate: Type R 1/8HP 115V 1PH 3400/2800RPM Rev G, BTU P/N 5076000
  • BTU International VIP98N rating plate showing Serial NECC-2, 208V, 107A, 3Ph, 36 KVA, 50/60Hz, 300°C max, ship date 05/98
  • BTU VIP98N reflow oven – top cover open revealing stainless steel heating plenum and cooling zone controls
  • BTU VIP98N reflow oven – interior cooling zone detail showing two rotary speed controls labeled Cooling Fans Top and Bottom
  • BTU VIP98N reflow oven – front access panels fully open showing all seven zone heater/blower modules and wiring
  • BTU VIP98N reflow oven – overhead interior view of all seven zone blower motors and wiring along full tunnel length
  • BTU VIP98N reflow oven – rear panel detail showing gas/coolant line fittings with quick-connect ports and staining
  • BTU International VIP98N 7-zone SMT reflow oven – full right-side view from entrance end showing complete machine
$5,000.00
Was: $5,500.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

BTU International VIP98N 7-Zone SMT Reflow Oven 300°C 208V 3Ph 107A 14 Ft

The BTU International VIP98N is a 14-foot inline convection reflow oven designed for high-throughput surface mount technology (SMT) PCB soldering in production environments. It features seven independently controlled heated zones that allow precise thermal profiling across the full reflow process — preheat, soak, reflow, and cooling — with a maximum process temperature of 300°C. The nonexplosive atmosphere rating makes it compatible with standard air-atmosphere solder paste and flux chemistries. This unit was manufactured in May 1998 at BTU's facility in N. Billerica, MA (Serial No. NECC-2).

Specifications & What's Included

  • Manufacturer: BTU International (N. Billerica, MA USA)
  • Model: VIP98N
  • Serial Number: NECC-2
  • Shipment Date: May 1998
  • Number of Heated Zones: 7
  • Maximum Temperature: 300°C (275°C or 300°C selectable)
  • Atmosphere: Nonexplosive
  • Input Voltage: 208V AC
  • Phase: 3-Phase
  • Frequency: 50/60 Hz
  • Amperage: 107A max
  • Power: 36 KVA
  • Conveyor Belt Width: 21.5 inches
  • Oven Entrance Height: 2.5 inches
  • Overall Tunnel Length: approximately 14 feet
  • Zone blower motors: Reliance Electric Type R, 1/8 HP, 115V, 1-Phase, 3400/2800 RPM, BTU P/N 5076000 (one per zone, seven total visible)
  • Stainless steel mesh conveyor belt with motorized drive
  • Cooling zone with dual variable-speed fan controls (Top and Bottom)
  • Front operator control panel with emergency stop, start/reset, and conveyor controls
  • Rear gas/coolant quick-connect fittings
  • Access panels on both sides for zone maintenance

Applications

Inline convection reflow ovens like the BTU VIP98N are the standard production tool for soldering surface mount components onto PCBs. Boards loaded with solder paste and SMT components travel on the conveyor belt through successive heated zones that follow a programmed thermal profile — controlled ramp-up, soak, reflow peak, and cooldown — melting and re-solidifying the solder paste to form permanent joints. The VIP98 series was a widely deployed platform in contract electronics manufacturing (CEM) and OEM PCB assembly lines from the late 1990s through the 2000s, and is compatible with eutectic tin-lead solder profiles as well as many lead-free processes (subject to the 300°C max temp). The 21.5-inch belt width accommodates large panel boards and multi-up fixtures, making it suitable for medium-to-high volume production. These machines remain in active use in legacy production lines, electronics repair shops, and smaller contract assemblers who need a proven, wide-belt inline oven without the cost of newer equipment.

Condition: Used
This BTU International VIP98N 7-Zone SMT Reflow Oven has been pulled from a working production environment where it was previously in active use. Externally the machine is in good used condition — the white cabinet panels are clean with only minor scuffs consistent with normal production use. The conveyor belt, zone blower motors, and internal wiring are all present and appear intact based on our inspection and photographs. Some light staining is visible around the rear gas/coolant fittings. All seven zone motor assemblies are visible and appear complete. Please review all 19 photos carefully for a full picture of the machine's condition, and contact us with any questions before purchasing.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
BTU International
Model:
VIP98N
MPN:
VIP98N
SKU:
44788
Type:
SMT Convection Reflow Oven
Number of Zones:
7 heated zones
Max Temperature:
300°C
Voltage:
208V
Phase:
3-Phase
Frequency:
50/60 Hz
Amperage:
107A
Power (KVA):
36 KVA
Atmosphere:
Nonexplosive
Conveyor Belt Width:
21.5 inches
Oven Entrance Height:
2.5 inches
Tunnel Length:
14 feet
Country/Region of Manufacture:
United States
Manufacturer Location:
N. Billerica, MA USA
Shipment Date (Mfr):
05/1998
Zone Motor Type:
Reliance Electric Type R 1/8HP 115V 1PH
Application:
SMT PCB Solder Reflow, Surface Mount Technology
Form Factor:
Floor-Standing / Inline Conveyor
Power Requirements:
208V AC, 3-Phase, 50/60Hz, 107A, 36 KVA
Seller Notes:
Reflow oven only — no accessories. Buyer responsible for rigging and freight.
Condition Notes:
This BTU International VIP98N 7-Zone SMT Reflow Oven was pulled from a working production environment. Cabinet and internals appear intact; minor cosmetic wear.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose