Description
Advanced Energy MDX 2225-000-F 10kW Magnetron Drive Sputtering Power Supply 3PH
The Advanced Energy MDX series is a line of DC magnetron drive power supplies used in physical vapor deposition (PVD) sputtering systems. This unit provides controlled DC output to drive magnetron sputtering cathodes in industrial and scientific thin-film deposition processes. It accepts three-phase AC input at either 380V or 415V and delivers up to 10kW of DC output power, with selectable regulation modes for power, current, or load control.
Specifications & What's Included
- Manufacturer: Advanced Energy Industries (Fort Collins, CO, USA)
- Model (per nameplate): 2225-000-F (Note: current listing references 2226-000-F — staff should confirm correct model number)
- Output Power: 10 kW
- Output Type: DC
- Input Voltage: 380V AC or 415V AC (selectable)
- Input Current: 25 Amps
- Phase: Three-Phase (3PH)
- Frequency: 50/60 Hz
- Form Factor: Rackmount, approximately 4U
- Front Panel: Left Display, Right Display, TARGET Display, MODIFY knob, TEST button, MODE key switch
- Front Panel Sections: OUTPUT (SET/ON), REGULATION (POWER / CURRENT / LOAD), DIMMER, MONITOR
- Status Indicators: ARC, FAULT, ALARM, WARNING, VACUUM, TARGET LIFE, and additional LEDs
- Rear Connectors: INTERCON A, INTERCON B, HOST, USER (DB-style multi-pin); three-pole AC input terminal block
- Cooling: Dual internal fans (rear-exhaust)
- Internal fuses used (per rear panel label)
- Unit only — no cables or accessories unless shown in photos
Applications
The Advanced Energy MDX series is a standard DC power platform for magnetron sputtering in PVD thin-film production. These supplies are used to bias and sustain magnetron discharge at sputtering cathodes in systems that deposit metallic, dielectric, and compound thin films onto substrates — common in semiconductor fabrication, flat-panel display manufacturing, optical coating, solar cell production, and hard-coating of tool steels. The MDX series supports both constant-power and constant-current regulation, making it adaptable to a range of cathode configurations and target materials. Units like this are frequently integrated into multi-zone sputter deposition systems alongside arc-handling and process control electronics. Advanced Energy has been a dominant supplier of RF and DC sputtering power to the semiconductor and flat-panel display industries since the 1980s.
This Advanced Energy MDX 10kW Magnetron Drive Sputtering Power Supply (model per nameplate: 2225-000-F) was pulled from a working fab environment and shows the kind of wear you'd expect from production use. The front panel and rack-mount flanges have surface scuffing, and the rear gold-anodized chassis has wear marks typical of lab or fab service. It has not been powered up or tested at our facility. We have had multiple units of this model in stock; the specific unit you receive may vary slightly from the one photographed, but will be the same model in equivalent configuration. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Advanced Energy |
Model: |
MDX 2225-000-F |
MPN: |
2225-000-F |
Secondary Model: |
MDX 2226-000-F |
SKU: |
52046 |
Type: |
DC Magnetron Drive Power Supply |
Output Power: |
10 kW |
Output Type: |
DC |
Input Voltage: |
380V AC / 415V AC (selectable) |
Input Current: |
25 Amps |
Phase: |
Three-Phase (3-Phase) |
Frequency: |
50/60 Hz |
Form Factor: |
Rackmount (4U) |
Application: |
PVD Sputtering, Thin-Film Deposition |
Front Panel Controls: |
Left Display, Right Display, TARGET Display, MODIFY knob, TEST, MODE key switch |
Regulation Modes: |
Power, Current, Load |
Status Indicators: |
ARC, FAULT, ALARM, WARNING, VACUUM, TARGET LIFE |
Rear Connectors: |
INTERCON A, INTERCON B, HOST, USER (DB-style multi-pin) |
Country/Region of Manufacture: |
United States |
Seller Notes: |
Unit only — no cables or accessories unless shown in photos. |
Condition Notes: |
This Advanced Energy MDX 10kW Magnetron Drive Sputtering Power Supply (MDX 2225-000-F per nameplate) was pulled from a working fab environment. Shows surface wear on the front panel, flanges, and rear chassis. Not tested at our facility. Sold as-is. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |