Description
Acopian RD24M13A Regulated AC/DC Power Supply 24VDC 13A 120VAC For Parts
The Acopian RD24M13A is a single-output regulated AC/DC power supply rated at 24 VDC and 13 amps, housed in a vented benchtop/chassis-mount enclosure. Acopian is a U.S.-based manufacturer known for producing linear regulated power supplies used in industrial, laboratory, and instrumentation applications. This unit is being sold AS-IS for parts or repair — the output voltage measures approximately 2.5–5 VDC rather than the rated 24 VDC, indicating a fault in the output regulation stage.
Specifications & What's Included
- Manufacturer: Acopian, Easton, PA
- Model: RD24M13A
- Type: Regulated AC/DC Linear Power Supply
- Rated Output Voltage: 24 VDC
- Rated Output Current: 13 A
- Input Voltage: 120 VAC
- Number of Outputs: 1
- Output Terminals (front-mounted screw terminal strip): +OUT, -OUT, SENS+, SENS-, AC, AC, GND
- Form Factor: Benchtop / chassis-mount with vented brass enclosure
- Fault: Output voltage reads approximately 2.5–5 VDC (not 24 VDC) — regulation fault present
- Sold AS-IS; power supply only — no accessories included
Applications
Acopian RD-series regulated power supplies are linear bench and chassis-mount supplies designed for use in industrial automation, laboratory instrumentation, test equipment, and OEM equipment builds where a stable, regulated DC output is required. The 24 VDC / 13 A output range is commonly used to power industrial control systems, PLCs, sensors, and similar 24V DC loads. This particular unit is suitable for technicians seeking a parts source, a chassis donor, or a repair project. Buyers familiar with Acopian power supply repair — including common failure modes in the pass transistor or voltage regulation circuitry — may find this unit a cost-effective candidate for refurbishment.
This Acopian RD24M13A Regulated AC/DC Power Supply is being sold AS-IS for parts or repair. The unit is not fully functional — when measured, the output voltage reads approximately 2.5–5 VDC rather than the rated 24 VDC, indicating a fault in the output regulation circuitry. The chassis and enclosure show normal surface wear consistent with prior bench use; the terminal strip and front panel label are intact and legible. This unit has not been further tested and is not guaranteed functional. It is offered for buyers seeking a source for parts, repair, or spares. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Acopian |
Model: |
RD24M13A |
MPN: |
RD24M13A |
Type: |
Regulated AC/DC Power Supply |
SKU: |
49902 |
Output Voltage: |
24 VDC |
Output Current: |
13 A |
Input Voltage: |
120 VAC |
Number of Outputs: |
1 |
Output Terminals: |
+OUT, -OUT, SENS+, SENS-, AC, AC, GND |
Form Factor: |
Benchtop / Chassis Mount |
Condition: |
As-Is / For Parts or Not Working |
Seller Notes: |
Sold AS-IS for parts or repair. Output voltage reads approx. 2.5–5 VDC. |
Country/Region of Manufacture: |
United States |
Condition Notes: |
Acopian RD24M13A Regulated AC/DC Power Supply sold AS-IS for parts or repair. Output voltage reads ~2.5–5 VDC instead of rated 24 VDC. Not functional. Not guaranteed. For parts/repair only. |
