Generic

4-Pin Molex Peripheral Power Splitter Cable 1x Female to 2x Male Y Adapter

(No reviews yet) Write a Review
SKU:
20667
MPN:
Computer
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
0.45 LBS
Shipping:
Calculated at Checkout
  • 4-pin Molex power splitter Y cable showing 1 female input end and 2 male output connectors with black ferrite chokes on wires
  • Two 4-pin Molex Y splitter cables side by side showing Fujikura branding on ferrite chokes, white connectors, and red, yellow, and black wiring
  • Close-up of 4-pin Molex female connector end showing four metal pin contacts in white housing
  • Close-up of 4-pin Molex male connector end showing four receptacle contacts in white housing
$4.00
Was: $8.00
Current Stock: 148

Sold Out

Description

4-Pin Molex Peripheral Power Splitter Cable 1x Female to 2x Male Y Adapter

This Y-splitter cable splits a single 4-pin Molex peripheral power connector into two male outputs, allowing one power source to supply two devices simultaneously.

Specifications & What's Included

  • Brand: Unbranded
  • Model: 4-Pin Molex Y Splitter
  • Cable Configuration: 1x Female Input to 2x Male Output
  • Voltage Lines: +5V (Red), +12V (Yellow), Ground (Black)
  • Compatible With: IDE/ATA Hard Drives, Optical Drives, Fans, Floppy Drives
  • Manufactured in Japan
  • Splitter cable only; no additional accessories included

Applications

This cable type was used in legacy computer systems to distribute power from a single PSU connector to multiple internal devices. Common in pre-2005 PC builds with IDE hard drives, CD/DVD drives, and case fans. The 4-pin Molex connector became standard in personal computers during the 1980s and remained prevalent through the early 2000s before SATA power connectors became dominant.

Condition: Used
This 4-pin Molex peripheral power splitter Y cable has been inspected and is in good used condition. The white Molex connectors are clean and the contacts appear intact with no visible damage. The wire insulation shows no cracking or fraying, and the ferrite chokes are intact on both output leads. Normal light handling marks are present consistent with prior use. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Unbranded
Model:
4-Pin Molex Y Splitter
Type:
Peripheral Power Splitter Cable
Connector Type:
4-Pin Molex (Peripheral)
Cable Configuration:
1x Female Input to 2x Male Output
Cable Style:
Y-Splitter
Compatible With:
IDE/ATA Hard Drives, Optical Drives, Fans, Floppy Drives
Pin Count:
4-Pin
Voltage Lines:
+5V (Red), +12V (Yellow), Ground (Black)
SKU:
20667
Condition:
Used – Inspected
Seller Notes:
Splitter cable only; no additional accessories included.
Country/Region of Manufacture:
Japan
Condition Notes:
This 4-pin Molex power splitter Y cable has been inspected and is in good used condition. Connectors and contacts are intact, wiring shows no damage. Normal light wear from prior use.
View AllClose

Related Products

Related Products

Molex to dual SATA power splitter cable showing full 6-inch length with 4-pin Molex input and two SATA power output connectors Close-up of 4-pin Molex female input connector end of SATA power splitter cable
Add to Cart
Quick view

Molex to Dual SATA Power Splitter Cable 6 inch 4-Pin to 2x SATA Adapter

Dual

$4.00
Was: $8.00
Molex to Dual SATA Power Splitter Cable 6 inch 4-Pin to 2x SATA AdapterInternal power cable adapter that converts a single 4-pin Molex connector to two 15-pin SATA power connectors. Enables...
42927
SKU:
42927
Availability:
Usually ships within 1-2 business days.
Weight:
1.00 LBS
Brand:
Unbranded
Model:
Molex to Dual SATA Power Splitter
Type:
Internal Power Cable Adapter / Splitter
SKU:
42927
Connector A (Input):
4-Pin Molex (Female)
Connector B (Output):
2x 15-Pin SATA Power (Female)
Number of SATA Outputs:
2
Cable Length:
6 inches (approx. 15 cm)
Compatible With:
SATA HDD, SATA SSD, SATA Optical Drives
Interface:
SATA Power / Molex 4-Pin
Cable Color:
Black, Red, Yellow, White
Condition:
Used – Inspected and Tested
Seller Notes:
Cable only. Tested and in working order.
Country/Region of Manufacture:
China
Condition Notes:
Molex to Dual SATA Power Splitter Cable tested and in working order. Good physical condition — no damage to connectors or wiring. 4-pin Molex and both SATA outputs clean and intact.
5-Pin DIN and DB9 male to DB15 female Y-splitter adapter cable — full cable view showing Y-configuration Close-up of DB15 female connector end of Y-splitter adapter cable — 15-pin socket detail
Add to Cart
Quick view

5-Pin DIN & DB9 Male to DB15 Female Y-Splitter Adapter Cable Serial RS-232

Generic

$18.00
Was: $40.00
5-Pin DIN & DB9 Male to DB15 Female Y-Splitter Adapter Cable Serial RS-232Y-splitter adapter cable that combines two serial inputs (5-Pin DIN and DB9 male connectors) into a single DB15 female...
16644
SKU:
16644
Availability:
Usually ships within 1-2 business days.
Weight:
0.95 LBS
Brand:
Unbranded
Model:
5-Pin DIN + DB9 to DB15 Y-Splitter
Type:
Y-Splitter Adapter Cable
Connector A:
5-Pin DIN Male
Connector B:
DB9 (DE-9) Male
Connector C (Output):
DB15 (DA-15) Female
Cable Configuration:
Y-Splitter (2 inputs to 1 output)
Interface:
RS-232 Serial
Gender:
Male to Female
Number of Pins (DIN):
5
Number of Pins (Serial):
9
Number of Pins (Output):
15
Cable Color:
Gray
SKU:
16644
Condition:
Used – Inspected
Seller Notes:
Cable only; no additional accessories included.
Condition Notes:
Used 5-Pin DIN & DB9 to DB15 Y-splitter adapter cable. Inspected; connectors appear intact and undamaged. Passive cable — no electronic testing applicable. Normal handling wear. Please contact us with questions.
CTI Cryogenics OLFLEX 190 4-pin power cable 1.7 ft — full cable showing straight male connector at top and right-angle female connector at bottom OLFLEX 190 cable jacket close-up showing 'OLFLEX 190' printed text on gray flexible cable
Add to Cart
Quick view

CTI Cryogenics OLFLEX 190 4-Pin Power Cable 1.7 ft Male to Female Cryo Pump

CTI Cryogenics

$45.00
Was: $90.00
CTI Cryogenics OLFLEX 190 4-Pin Power Cable 1.7 ft Male to Female Cryo PumpThis is a used CTI Cryogenics power interconnect cable made with OLFLEX 190 flexible cable jacket, approximately 1.7 feet in...
27658
SKU:
27658
Availability:
Usually ships within 1-2 business days.
Weight:
2.00 LBS
Brand:
CTI Cryogenics
Model:
OLFLEX 190
MPN:
OLFLEX 190
Type:
Cryogenic Pump Power Cable
SKU:
27658
Cable Length:
1.7 ft (approx. 20 inches)
Connector Type:
4-Pin Circular — Male to Female
Connector Gender (End 1):
Male (straight)
Connector Gender (End 2):
Female (right-angle)
Number of Pins:
4
Jacket Material:
OLFLEX 190 PVC/flexible jacket
Compatible With:
CTI Cryogenics cryo pumps and compressors
Application:
Cryogenic refrigerator / cryo pump power interconnect
Condition:
Used – Pulled from Working Environment
Seller Notes:
Cable only; no additional accessories included.
Country/Region of Manufacture:
Germany
Condition Notes:
CTI Cryogenics OLFLEX 190 4-pin power cable in good used condition. Pulled from a working environment. Cable jacket intact, both circular connectors clean with pins/sockets undamaged. Please contact us with any questions.