Xenotronix

Xenotronix 1LC162A-29 12V DC 4A Battery Charger 115VAC 60Hz Fast Charge

(No reviews yet) Write a Review
SKU:
52035
MPN:
1LC162A-29
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
10.16 LBS
Shipping:
Calculated at Checkout
  • Xenotronix 1LC162A-29 12V battery charger – front panel view showing Fast Charge and Power On LED indicators, battery terminal block, and Xenotronix label
  • Xenotronix 1LC162A-29 battery charger – rear/side view showing large aluminum heat sink fins and attached AC power cord with NEMA plug
  • Xenotronix 1LC162A-29 battery charger – close-up of front panel showing Fast Charge and Power On indicators, battery clamp terminals, and Xenotronix branding
  • Xenotronix 1LC162A-29 battery charger – side/rear view showing heat sink fins, fuse holder, and power cord routing
  • Xenotronix 1LC162A-29 battery charger – rating label showing Model 1LC162A-29, Output 12VDC 4A, D/C 9516, Fuse 2AG 2A, Input 115VAC 60Hz
  • Xenotronix 1LC162A-29 battery charger – bottom view showing chassis construction, mounting screws, and transformer assembly
$25.00
Was: $50.00
Current Stock: 1

Sold Out

Description

Xenotronix 1LC162A-29 12V DC 4A Battery Charger 115VAC 60Hz Fast Charge

Benchtop battery charger for 12V DC maintenance-free lead acid batteries. Delivers 4A output current at 115V AC input, 60Hz.

Specifications & What's Included

  • Input: 115V AC, 60 Hz
  • Output: 12V DC, 4A
  • Fuse: 2AG 2A
  • Battery connector: 3-terminal screw/clamp block
  • LED indicators: Power On, Fast Charge
  • Power cord: 6 ft attached
  • Manufactured in United States; Date code 9516

Applications

Used in telecom installations, industrial facilities, and equipment maintenance for charging 12V lead acid backup batteries and system power supplies. Common in legacy telecommunications infrastructure and industrial control systems requiring on-site battery charging and maintenance.

Condition: Used
This Xenotronix 1LC162A-29 12V DC Battery Charger has been inspected and is in good used condition. It was pulled from a working environment where it was previously in service. The gray metal enclosure shows light surface wear typical of field use. The front panel labels, LED indicators, and battery terminal block are intact. The heat sink fins on the rear are clean and undamaged. The attached 6-foot AC power cord is present and in good condition. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Xenotronix
Model:
1LC162A-29
MPN:
1LC162A-29
SKU:
52035
Type:
12V DC Battery Charger
Input Voltage:
115V AC
Input Frequency:
60 Hz
Output Voltage:
12V DC
Output Current:
4A
Fuse:
2AG 2A
Power Cable Length:
6 ft
Indicators:
Fast Charge, Power On (LED)
Battery Output Connector:
3-terminal screw/clamp block (front panel)
Battery Compatibility:
Maintenance-free lead acid, non-automotive
Date Code:
9516
Country/Region of Manufacture:
United States
Form Factor:
Benchtop / Desktop
Condition:
Used – Pulled from Working Environment
Seller Notes:
Includes attached 6-ft AC power cord. No additional accessories.
Condition Notes:
Xenotronix 1LC162A-29 12V DC 4A Battery Charger in good used condition. Pulled from a working environment. Inspected — enclosure, indicators, terminals, and cord all intact. Normal cosmetic wear.
View AllClose

Related Products

Related Products

Syn-Optics AFS3000D Optical Head Control Unit – front panel view showing beige and blue enclosure with Syn-Optics logo Syn-Optics AFS3000D – rear panel view showing four labeled connectors (A, B, C, D), D-sub ports, multi-pin circular connectors, cooling fan, power switch, and IEC inlet
Add to Cart
Quick view

Syn-Optics AFS3000D Optical Head Control Unit 115VAC 60Hz 4A US Made

SynOptics

$150.00
Was: $300.00
Syn-Optics AFS3000D Optical Head Control Unit 115VAC 60Hz 4A US MadeThe Syn-Optics AFS3000D is a benchtop optical head control unit manufactured by Syn-Optics Inc. in the United States. It is...
51559
SKU:
51559
Availability:
Usually ships within 1–2 business days.
Weight:
30.00 LBS
Brand:
Syn-Optics
Model:
AFS3000D
MPN:
AFS3000D
SKU:
51559
Type:
Optical Head Control Unit
Power Requirements:
115VAC, 60Hz, 4.0A
Voltage:
115 VAC
Current Rating:
4.0 Amps
Frequency:
60 Hz
Fuse Rating:
2 Amp Slow Blow (x3)
Form Factor:
Benchtop / Desktop Enclosure
Dimensions:
18" x 13" x 8"
Connector Ports:
4 labeled rear connectors: A, B, C, D
Rear Connector Types:
D-sub (x2), multi-pin circular (x2), IEC power inlet
Cooling:
Rear-mounted fan
Country/Region of Manufacture:
United States
Condition:
Used – Visually Inspected
Seller Notes:
Unit only; no accessories included. Visually inspected, good condition.
Condition Notes:
Syn-Optics AFS3000D Optical Head Control Unit. Visually inspected, good used condition. Light surface wear on chassis. Rear connectors intact. Not powered or tested at our facility. Photos available.
Datatel DCP1110 AC/DC Transformer Plug-In Module – left-side view showing two transformer cores and indicator panel Datatel DCP1110 Transformer Module – right-side angled view showing dual transformer cores and green PCB base
Add to Cart
Quick view

Datatel DCP1110 AC/DC Transformer Plug-In Module 115V 60Hz -12 -5 +5 +12 VDC

Datatel

$75.00
Was: $150.00
Datatel DCP1110 AC/DC Transformer Plug-In Module 115V 60Hz -12 -5 +5 +12 VDCThe Datatel DCP1110 is a plug-in AC/DC transformer module that accepts a 115V AC single-phase, 60Hz primary input and...
48599
SKU:
48599
Availability:
Usually ships within 1-2 business days.
Weight:
14.00 LBS
Brand:
Datatel
Model:
DCP1110
MPN:
DCP1110
SKU:
48599
Type:
AC/DC Transformer Plug-In Module
Primary Voltage:
115V AC
Secondary Voltage:
-12V, -5V, +5V, +12V DC
Phase:
Single Phase
Frequency:
60 Hz
Number of Outputs:
4
Output Voltage Rails:
-12 VDC, -5 VDC, +5 VDC, +12 VDC
Form Factor:
Plug-In Module
Power Requirements:
115V AC, 60Hz, Single Phase
Condition:
Used – Inspected
Country/Region of Manufacture:
United States
Seller Notes:
Sold as pictured; plug-in module only, no external cables included.
Condition Notes:
Datatel DCP1110 AC/DC Transformer Plug-In Module in good used condition. Inspected; transformer cores and housing show light age patina, no visible damage. Front panel and hardware intact. Please contact us with any questions.
Schlage Electronics 3708A power supply front panel with indicator LEDs and output terminal wiring, angled three-quarter view Schlage Electronics 3708A power supply rear and side view showing large aluminum heat sink fins and AC power inlet
Add to Cart
Quick view

Schlage Electronics 3708A 24VDC Battery Charger Power Supply 115VAC Input

Schlage Electronics

$75.00
Was: $150.00
Schlage Electronics 3708A 24VDC Battery Charger Power Supply 115VAC InputThis is a 24VDC battery charger and power supply unit designed for Schlage Electronics access control systems. It converts...
38593
SKU:
38593
Availability:
Usually ships within 1-2 business days.
Weight:
28.00 LBS
Brand:
Schlage Electronics
Model:
3708A
MPN:
3708 A
Type:
Power Supply / 24VDC Battery Charger
SKU:
38593
Input Voltage:
115 VAC
Output Voltage:
24V DC
Battery Fuse Rating:
3AG / 10 AMP
AC Fuse Rating:
3AG / 2 AMP
UL Listing:
UL Listed 912Z Power Supply
CSA Listing:
CSA LR53781
Country/Region of Manufacture:
United States
Form Factor:
Enclosed / Wall-Mount or Panel-Mount
Power Requirements:
115 VAC Input
Indicators:
PWR, BATT CONN, BATT FULL VOLTS LEDs
Output Terminals:
24V BATT, + LOCK PWR, - LOCK PWR
Condition:
Used – Pulled from Working Environment
Seller Notes:
Includes attached output wiring harness. No additional accessories.
Compatible With:
Schlage Electronics access control systems
Condition Notes:
Schlage Electronics 3708A 24VDC battery charger power supply. Inspected, in good used condition. Pulled from a working environment where it was in use and functional. Output wiring attached.
Hobart Accu-Charger 865C3-6 forklift battery charger front view showing Hobart logo and control panel on pallet Hobart 865C3-6 Accu-Charger rear view showing large ventilation louvers on teal enclosure
Add to Cart
Quick view

Hobart Accu-Charger 865C3-6 Forklift Battery Charger 12V 171A 208/240/480V

Hobart

$500.00
Was: $1,000.00
Hobart Accu-Charger 865C3-6 Forklift Battery Charger 12V 171A 208/240/480V 3-PhaseThe Hobart Accu-Charger 865C3-6 is a heavy-duty industrial forklift battery charger designed to charge 12-volt...
21134
SKU:
21134
Availability:
Usually ships within 1-2 business days.
Weight:
308.00 LBS
Brand:
Hobart
Model:
865C3-6
MPN:
865C3-6
Secondary Model:
N6421A
SKU:
21134
Type:
Industrial Forklift Battery Charger
Condition:
As-Is / For Parts or Not Working
Seller Notes:
Sold AS-IS for parts or repair; includes internal components visible in photos
Country/Region of Manufacture:
United States
DC Output Voltage:
12V
Max DC Output Current:
171A
AC Input Voltage:
208/240/480V AC
Input Phase:
Three Phase
Input Frequency:
60 Hz
AC Input Max Amps:
10.5A / 9A / 4.5A (208/240/480V)
Battery Type:
LA (Lead Acid)
Number of Cells:
6
Amp Hours Range:
726–865 Ah in 8 Hours
Number of Circuits:
1
Control Type:
Hobart 300C Control with Auto Start/Stop
Form Factor:
Floor Standing / Pallet Mount
Power Requirements:
208/240/480V AC, 3-Phase, 60Hz
Condition Notes:
Hobart Accu-Charger 865C3-6 12V forklift battery charger sold AS-IS for parts or repair. Not tested or guaranteed functional. Interior components appear intact. Heavy exterior wear. Please contact us with questions.