Description
Windsor L2020D Lightning Floor Burnisher Buffer 36V Battery For Parts Repair
The Windsor L2020D is a walk-behind, battery-powered floor burnisher from Windsor Industries, Inc. (Englewood, CO, USA), part of their Lightning series of commercial floor care machines. This unit is being sold AS-IS for parts or repair value — the 36V battery pack is heavily corroded, has low power, and will need full replacement before the machine can be put into service. It is not guaranteed functional in its current state.
Specifications & What's Included
- Model: Windsor L2020D (Lightning Series)
- Voltage: 36V DC (battery-powered)
- Battery status: Low power, heavily corroded — requires replacement
- Hour meter: Hobbs Quartz meter reads approximately 559 hours
- Drive system: Walk-behind, battery electric
- Pad/disc: Single burnishing pad and pad driver assembly included
- Control panel: Digital voltmeter display, red key switch, battery charge indicator, pad pressure indicators
- Manufacturer: Windsor Industries, Inc., Englewood, CO, USA
- Sold AS-IS — no batteries, accessories, or charger guaranteed to be functional
Applications
Windsor's Lightning series burnishers are commercial-grade walk-behind machines used in facilities maintenance for high-speed burnishing and polishing of hard floor surfaces — vinyl composition tile (VCT), concrete, and similar commercial flooring. Battery-powered burnishers like the L2020D are common in schools, hospitals, retail stores, warehouses, and other large commercial facilities where a cord-free machine is needed for uninterrupted floor care across large open areas. Windsor Industries has been a well-known name in commercial floor care equipment, and the Lightning series machines are recognized for their walk-behind design suited to medium-to-large floor areas. Parts, pad drivers, motors, and hardware from machines like this are sought by facilities maintenance shops for servicing other units of the same model family.
This Windsor L2020D Lightning Floor Burnisher is being sold AS-IS for parts or repair. The 36V battery pack has low power and needs replacement — the batteries are heavily corroded and degraded as shown in the photos. The machine itself shows general wear consistent with commercial use: scuffing and soiling on the blue body panels, wear on the burnishing pad and pad driver assembly, and cosmetic wear on the handle. The control panel (digital voltmeter display, key switch, battery/pad indicators) appears intact. The Hobbs Quartz hour meter reads approximately 559 hours. This unit has not been tested and is not guaranteed functional — it is offered strictly for parts or repair value. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Windsor |
Model: |
L2020D |
MPN: |
L2020D |
Type: |
Battery-Powered Floor Burnisher / Buffer |
SKU: |
40177 |
Condition: |
As-Is / For Parts or Not Working |
Seller Notes: |
Sold AS-IS; batteries have low power and need replacement |
Country/Region of Manufacture: |
United States |
Voltage: |
36V DC |
Power Source: |
Battery (36V DC) |
Series: |
Lightning |
Drive System: |
Walk-Behind, Battery Electric |
Hour Meter Reading: |
~559 hours (Hobbs Quartz meter) |
Battery Condition: |
Low power — batteries need replacement |
Pad/Disc: |
Single burnishing pad/disc, visible in photos |
Control Panel: |
Digital voltmeter display, key switch, indicator lights |
Manufacturer: |
Windsor Industries, Inc., Englewood, CO, USA |
Compatible With: |
Standard 20-inch floor burnishing pads |
Application: |
Commercial floor burnishing and polishing |
Condition Notes: |
Windsor L2020D Lightning Floor Burnisher sold AS-IS for parts or repair. 36V battery pack is heavily corroded and has low power — needs full replacement. ~559 hours on Hobbs meter. Not tested, not guaranteed functional. |
