WATTBOX

WattBox WB-600CH-IPVCE-12 IP Power Conditioner 12-Outlet Surge OvrC 2U Rackmount

(No reviews yet) Write a Review
SKU:
52691
MPN:
WB-600CH-IPVCE-12
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
17.00 LBS
Shipping:
Calculated at Checkout
  • WattBox WB-600CH-IPVCE-12 IP power conditioner front panel — 2U rackmount with blue digital voltage/current display, power button, LED indicators, 2x USB charging ports, and utility outlet
  • WattBox WB-600CH-IPVCE-12 rear panel — 12 orange NEMA 5-15R outlets (Always On, Surge Only, Controller, PoE), RJ-45 Ethernet port, coaxial connectors, and IEC C14 power inlet
  • WattBox WB-600CH-IPVCE-12 front display close-up showing VOLTAGE: 117.8V and CURRENT: 0.5A readings while powered on
  • WattBox WB-600CH-IPVCE-12 front panel logo close-up showing WattBox branding and OvrC Enabled designation
  • WattBox WB-600CH-IPVCE-12 rear panel status LED section showing Internet, System Status, Auto Reboot, Safe Voltage, Protected, and Grounded indicators
$255.00
Was: $600.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

WattBox WB-600CH-IPVCE-12 IP Power Conditioner 12-Outlet Surge OvrC 2U Rackmount

The WattBox WB-600CH-IPVCE-12 is a 2U rackmount IP power conditioner from WattBox's 600 Series, designed for AV system installations in equipment cabinets and rack shelves. It provides 12 NEMA 5-15R outlets with individual outlet control, surge protection, safe voltage monitoring, and OvrC cloud-based remote management. The front panel features a blue digital display showing real-time voltage and current draw, two USB-A charging ports, and a utility outlet for peripherals.

Specifications & What's Included

  • Model: WB-600CH-IPVCE-12
  • Series: WattBox 600 Series
  • Form Factor: 2U Rackmount Chassis
  • Total Outlets: 12 (NEMA 5-15R, orange, rear-panel)
  • Outlet Zones: Always On (x2), Surge Only (x2), Controllable/Controller (x4+), PoE-labeled outlet
  • Controllable Outlets: 8
  • Network Control: OvrC cloud-enabled via RJ-45 Ethernet (rear)
  • Auto Reboot: Automatic device reboot on network connectivity loss
  • Surge Protection: Ceramic MOV technology with Surge Disconnect (sacrificial surge event protection)
  • Safe Voltage Monitoring: Automatic disconnect on over- and under-voltage conditions; reconnects when voltage normalizes
  • Sequential Power: Staged power-on sequencing to prevent speaker pop and circuit overload
  • Front Panel: Digital voltage and current readout (blue LED), power button, status LEDs, 2x USB-A charging ports, 1x utility outlet
  • Rear Panel Status Indicators: Internet, System Status, Auto Reboot, Safe Voltage, Protected, Grounded
  • Power Inlet: IEC C14
  • Connectivity: RJ-45 Ethernet for OvrC/IP control
  • Unit only — no cables or accessories included

Applications

The WattBox 600 Series IP power conditioners are used in professionally installed AV systems — home theaters, commercial AV racks, conference rooms, and control systems. The OvrC integration is standard in snap one (formerly SnapAV) and Control4 ecosystems, allowing integrators to remotely monitor, reboot, and control connected equipment without a truck roll. The auto-reboot function is particularly common in installations where streaming devices, IP cameras, DSPs, and network gear occasionally need a power cycle. Safe voltage monitoring makes these a standard choice in areas prone to voltage instability. The sequential power-on feature protects amplifiers and subwoofers from startup transients.

Condition: Used
This WattBox WB-600CH-IPVCE-12 IP Power Conditioner powers on, the front-panel voltage and current displays light up and read (117.8V / 0.5A visible in our photos), and power is confirmed on the Always On outlets. We were not able to test the network-controlled outlets, so those are sold as-inspected. The unit came out of a working AV installation where it was previously in use. Cosmetically it is in good shape with minor surface wear consistent with rack-mounted use. Please review our full photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
WattBox
Model:
WB-600CH-IPVCE-12
MPN:
WB-600CH-IPVCE-12
SKU:
52691
Type:
IP Power Conditioner
Series:
600 Series
Number of Outlets:
12
Controllable Outlets:
8
Form Factor:
2U Rackmount Chassis
Network Control:
OvrC Enabled
Auto Reboot:
Yes — automatic reboot on network loss
Surge Protection:
Yes — Ceramic MOV with Surge Disconnect
Safe Voltage Monitoring:
Yes — auto disconnect on over/under voltage
Sequential Power:
Yes
Front Panel Display:
Voltage and Current digital readout
USB Charging Ports:
2x USB-A (front panel)
Power Inlet:
IEC C14
Connectivity:
RJ-45 Ethernet
Seller Notes:
Unit only — no cables or accessories included
Country/Region of Manufacture:
United States
Condition Notes:
WattBox WB-600CH-IPVCE-12 IP Power Conditioner powers on; Always On outlets confirmed working; network-controlled outlets not tested. Pulled from a working AV installation. Good cosmetic condition. Please view photos and contact us with questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose