Description
Vacuum Generators Ltd RGA Residual Gas Analyzer Probe Sensor VG Hastings
Residual Gas Analyzer (RGA) probe sensor manufactured by Vacuum Generators Ltd. This unit performs real-time mass spectrometry analysis of residual gases within vacuum chambers and UHV systems.
Specifications & What's Included
- Model: RGA Probe Sensor
- Manufacturer: Vacuum Generators Ltd (England)
- Form Factor: Cylindrical flange-mount probe
- Mounting: Conflat / ISO flange with bolt-circle base
- Body Material: Stainless Steel
- Connectors: BNC (x3), D-sub multi-pin, SMA/coax
- Compatible with: UHV vacuum systems, VG RGA controllers
Applications
RGA probes are used for compositional analysis of residual gases in vacuum chambers, leak detection, and system diagnostics in research and industrial vacuum applications. This sensor type integrates directly into chamber walls via flange mounting and connects to external RGA control electronics for data acquisition. Commonly deployed in electron microscopy, thin-film deposition, mass spectrometry, and ultra-high vacuum research systems.
This Vacuum Generators Ltd residual gas analyzer (RGA) probe sensor has been inspected and is in good condition. The stainless steel body is clean and free of significant damage. The BNC connectors, D-sub connector, and coax port on the base end appear intact. The internal quadrupole assembly is visible and appears undamaged with no obvious broken or missing rods or components. Normal handling marks are present on the exterior consistent with prior use in a vacuum system. This unit has not been bench-tested at our facility. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Vacuum Generators Ltd |
Model: |
RGA Probe Sensor |
Type: |
Residual Gas Analyzer (RGA) Probe Sensor |
SKU: |
15424 |
Country/Region of Manufacture: |
England, United Kingdom |
Form Factor: |
Cylindrical / Flange-Mount Probe |
Application / Use Case: |
Residual gas analysis in vacuum chambers |
Connector Type: |
BNC (x3), D-sub multi-pin, SMA/coax |
Mounting Type: |
Conflat / ISO flange (bolt-circle base) |
Body Material: |
Stainless Steel |
Compatible With: |
UHV vacuum systems, VG RGA controllers |
Condition: |
Used – Inspected and in Good Condition |
Seller Notes: |
Sold as a standalone RGA probe sensor unit only. |
Review Status: |
Auto-Approved (needs review) 2026-07-04 |
Condition Notes: |
Vacuum Generators Ltd RGA probe sensor. Inspected and in good condition. Stainless steel body clean, connectors intact, internal quadrupole assembly appears undamaged. Not bench-tested at our facility. Photos available. |
