Description
Teledyne Taber 206-SA Pressure Transducer 0-500 PSI 350 Ohm Aerospace
Strain gauge pressure transducer for high-pressure measurement applications. Uses a Wheatstone bridge configuration to convert pressure into electrical signal output.
Specifications & What's Included
- Model: 206-SA (MPN: 206-SA)
- Pressure Range: 0-500 PSI
- Bridge Resistance: 350 Ohms
- Technology: Strain Gauge / Wheatstone Bridge
- Body Material: Stainless Steel
- Pressure Port: Male AN/MS Fitting (top)
- Electrical Connector: Multi-pin circular (side-exit)
- Manufacturer: Taber Instrument Corporation, North Tonawanda, NY
- Unit only
Applications
Used in aerospace and high-pressure measurement systems for monitoring hydraulic and pneumatic systems. This transducer was documented as part of space shuttle program hardware, indicating use in critical aircraft and spacecraft applications requiring reliable pressure monitoring.
Condition: Used
This Teledyne Taber Model 206-SA Pressure Transducer has been inspected and appears to be in good used condition. The stainless steel body shows surface wear, scuffing, and label deterioration consistent with its aerospace service history — including rust spotting visible on the upper housing and some adhesive residue from prior labeling. The multi-pin electrical connector appears intact and undamaged. The AN pressure port at the top is present and appears unobstructed. This unit was previously used to measure chamber pressure on full-scale space shuttle rocket motors, per original documentation. Please view our photo set and contact us if you have any questions.
This Teledyne Taber Model 206-SA Pressure Transducer has been inspected and appears to be in good used condition. The stainless steel body shows surface wear, scuffing, and label deterioration consistent with its aerospace service history — including rust spotting visible on the upper housing and some adhesive residue from prior labeling. The multi-pin electrical connector appears intact and undamaged. The AN pressure port at the top is present and appears unobstructed. This unit was previously used to measure chamber pressure on full-scale space shuttle rocket motors, per original documentation. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Teledyne Taber |
Model: |
206-SA |
MPN: |
206-SA |
Type: |
Pressure Transducer |
SKU: |
48036 |
Manufacturer: |
Taber Instrument Corporation |
Manufacturer Location: |
North Tonawanda, NY, USA |
Pressure Range: |
0-500 PSI |
Bridge Resistance: |
350 Ohms |
Transducer Technology: |
Strain Gauge / Wheatstone Bridge |
Body Material: |
Stainless Steel |
Pressure Port: |
Male AN/MS Fitting (top port visible) |
Electrical Connector: |
Multi-pin circular connector (side-exit) |
Application: |
Aerospace, High Pressure Measurement |
Country/Region of Manufacture: |
United States |
Condition: |
Used – Inspected |
Seller Notes: |
Unit only; documented space shuttle program provenance per original listing. |
Condition Notes: |
Teledyne Taber 206-SA Pressure Transducer, 0-500 PSI, 350 ohm. Inspected; good used condition. Shows surface wear, scuffing, rust spotting, and label wear consistent with aerospace service. Connector and pressure port intact. |
