Tektronix P6062B 100MHz 1X/10X Switchable Oscilloscope Probe 1MΩ 10MΩ 6ft

Tektronix P6062B 100MHz 1X/10X Switchable Oscilloscope Probe 1MΩ 10MΩ 6ft

The Tektronix P6062B is a passive oscilloscope probe with selectable 1X and 10X attenuation, offering a 100 MHz bandwidth in the 10X position. The 1X/10X switch on the probe body lets the user match the input impedance to the oscilloscope and the circuit under test — 1X for low-frequency, low-level signals where maximum sensitivity is needed, or 10X for higher-frequency work with reduced loading on the circuit. The probe features a 6 ft cable terminated in a standard BNC connector.

Specifications & What's Included

• Model: Tektronix P6062B
• Bandwidth: 100 MHz (10X position)
• Attenuation: 1X / 10X switchable
• 1X input impedance: 1 MΩ / 105 pF
• 10X input impedance: 10 MΩ / 14 pF
• Cable length: 6 ft
• Connector: BNC (standard oscilloscope input)
• Ground lead attached at probe tip
• Probe body with 1X/10X selector switch

Applications

The P6062B is a general-purpose passive probe designed for use with Tektronix oscilloscopes and compatible with any oscilloscope accepting a standard BNC input. Switchable 1X/10X passive probes like this one are standard accessories in electronics labs, field service, and repair shops. The 10X position reduces capacitive loading on the circuit under test and extends bandwidth to 100 MHz, making it suitable for general analog and digital circuit debugging, signal integrity checks, and waveform analysis. The 1X position provides a direct 1 MΩ path useful for low-frequency measurements where maximum signal amplitude is needed. This style of probe dates from the 1980s–1990s era of Tektronix analog and early digital oscilloscopes but remains fully compatible with modern oscilloscopes that accept BNC probes.