Tektronix

Tektronix DM502 Digital Multimeter DC AC Volts Ohms dB TM500 Plug-In Module

(No reviews yet) Write a Review
SKU:
36986
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
2.00 LBS
Shipping:
Calculated at Checkout
  • Tektronix DM502 Digital Multimeter plug-in module – three-quarter front-left view showing LED display, rotary range selector, and banana jack inputs
  • Tektronix DM502 Digital Multimeter – close-up front panel showing LED display, DC/AC Volts, Ohms, dB, DC mA range markings on rotary selector, and LO/INPUT/HI banana jacks
  • Tektronix DM502 Digital Multimeter – rear/bottom view showing TM500 plug-in edge connector, PCB internals, and vented aluminum module chassis
$59.00
Was: $137.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Tektronix DM502 Digital Multimeter DC AC Volts Ohms dB TM500 Plug-In Module

The Tektronix DM502 is a plug-in digital multimeter designed for use in Tektronix TM500 and TM5000 series mainframes. It measures DC and AC voltage, resistance (ohms), decibels (dB), and DC and AC current (milliamps), with a front-panel LED digital readout and a large rotary range selector that consolidates all measurement functions into a single control. As a plug-in module, it draws power from the host mainframe and occupies one plug-in slot.

Specifications & What's Included

  • Manufacturer: Tektronix
  • Model: DM502
  • Type: Digital Multimeter Plug-In Module
  • Compatible Mainframes: Tektronix TM500 and TM5000 series
  • Display: LED digital readout (front panel)
  • Measurement Functions: DC Volts, AC Volts, Ohms, dB, DC mA, AC mA
  • Range Selection: Single rotary selector knob covering all functions and ranges
  • Input Terminals: LO, INPUT (INV/MAX), and HI banana jacks on front panel
  • Additional Controls: ZERO adjust, OUT/NORM/EXT switch, ADD TO DISPLAY / dB MODE switch
  • Form Factor: Single-width TM500/TM5000 plug-in module
  • Chassis: Vented aluminum plug-in housing with TM500 edge connector
  • Included: Module only — no mainframe, test leads, or cables

Applications

The DM502 is part of Tektronix's TM500 modular instrument system, introduced in the early 1970s, which allowed engineers and technicians to build a customized bench instrument setup by selecting individual plug-in modules — oscilloscopes, multimeters, function generators, and more — and housing them in a common TM500 or TM5000 mainframe that supplied power and a shared display interface. The DM502 fills the multimeter slot in that system, providing DC and AC voltage and current measurement along with resistance and dB capability without requiring a separate benchtop instrument. This type of plug-in multimeter was widely used in electronics labs, production test benches, and field service environments throughout the 1970s and 1980s. Today the TM500 system retains a strong following among vintage electronics enthusiasts, university labs maintaining legacy equipment, and technicians who still service the equipment that was originally tested and maintained using these instruments.

Condition: Used
This Tektronix DM502 Digital Multimeter plug-in module has been inspected and appears to be in good used condition. The front panel label, rotary range selector, and banana jack inputs all look clean and intact with no obvious damage. The aluminum module chassis shows light handling wear typical of used bench equipment. This unit was pulled from a working environment where it had been previously in use. Please review our photos carefully and contact us with any questions before purchasing.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Tektronix
Model:
DM502
MPN:
DM502
Type:
Digital Multimeter Plug-In Module
SKU:
36986
Form Factor:
TM500/TM5000 Plug-In Module
Compatible With:
Tektronix TM500 / TM5000 Mainframe
Measurement Functions:
DC Volts, AC Volts, Ohms, dB, DC mA, AC mA
Display Type:
LED Digital Readout
Input Connectors:
LO, INPUT (INV/MAX), HI — banana jacks
Range Selector:
Rotary multi-function selector knob
Country/Region of Manufacture:
United States
Seller Notes:
Module only — no mainframe, test leads, or cables included.
Condition Notes:
This Tektronix DM502 Digital Multimeter plug-in module has been inspected and is in good used condition. Pulled from a working environment. Light handling wear on chassis.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose