Description
Simco Orion 4009045 Ionizing Air Nozzle Controller 120VAC 100PSI 7ft Cable
Benchtop controller unit for ionizing air nozzle systems used in static elimination and ESD control applications. Regulates pressurized air flow and ionization output to the attached nozzle assembly.
Specifications & What's Included
- Power: 120VAC, 50/60Hz, 0.10A
- Maximum gas input pressure: 100 PSI
- Operating temperature range: up to 104°F (40°C)
- Cable length: 7 ft with multi-pin circular nozzle connector
- IEC C14 AC inlet connector
- Includes controller unit and ionizing air nozzle cable assembly
Applications
Ionizing air nozzle controllers are used in manufacturing and assembly environments to neutralize static electrical charges on sensitive components and work surfaces. Commonly deployed in electronics assembly, cleanroom operations, and precision manufacturing where ESD protection is required. The nozzle directs ionized air to target areas during product handling and assembly processes.
Condition: Used
This Simco Orion 4009045 Ionizing Air Nozzle Controller has been inspected and is in good used condition. It was pulled from a working environment where it was in active use. The controller housing shows moderate paint wear and edge chipping, most notably along the top and lower corners — visible in the photos. The nozzle body is intact, though the nozzle tip shows some soiling and residue typical of compressed-air use in a production environment. The IEC AC inlet and multi-pin connector on the rear panel appear undamaged. The 7ft cable is present and intact. Made in the USA per the rating label. Please view our photo set and contact us if you have any questions.
This Simco Orion 4009045 Ionizing Air Nozzle Controller has been inspected and is in good used condition. It was pulled from a working environment where it was in active use. The controller housing shows moderate paint wear and edge chipping, most notably along the top and lower corners — visible in the photos. The nozzle body is intact, though the nozzle tip shows some soiling and residue typical of compressed-air use in a production environment. The IEC AC inlet and multi-pin connector on the rear panel appear undamaged. The 7ft cable is present and intact. Made in the USA per the rating label. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Simco |
Model: |
Orion |
MPN: |
4009045 |
SKU: |
47333 |
Type: |
Ionizing Air Nozzle Controller |
Power Requirements: |
120VAC, 50/60Hz, 0.10A |
Gas Input Pressure (Max): |
100 PSI |
Ambient Temperature (Max): |
104°F (40°C) |
Cable Length: |
7 ft |
Application: |
Static Elimination / ESD Control |
Country/Region of Manufacture: |
United States |
Form Factor: |
Benchtop / Inline Controller |
Connector Type: |
IEC C14 AC inlet; multi-pin circular nozzle connector |
Seller Notes: |
Includes controller unit and attached 7ft ionizing air nozzle cable assembly. |
Condition Notes: |
Simco Orion 4009045 Ionizing Air Nozzle Controller, used, pulled from a working environment. Controller housing shows paint wear and edge chipping. Nozzle tip shows residue from use. IEC inlet and connectors appear undamaged. 7ft cable included. |