Description
Seagate Cheetah ST136403FC 36.4GB 3.5" Fibre Channel Hard Drive HH FC HDD
The Seagate Cheetah ST136403FC is a 36.4GB 3.5-inch half-height hard disk drive with a Fibre Channel interface, designed for enterprise storage environments. Part of Seagate's high-performance Cheetah series, this drive was built for the demanding I/O requirements of servers, workstations, and SAN-attached storage arrays. The drive is fitted with integrated mounting rails and carries Sun cross-reference part number 3900012-02, indicating compatibility with Sun Microsystems storage infrastructure.
Specifications & What's Included
- Brand: Seagate
- Series: Cheetah
- Model Number: ST136403FC
- Part Number: SL7004-022
- Sun Cross-Reference Part Number: 3900012-02
- Capacity: 36.4 GB
- Interface: Fibre Channel (FC)
- Form Factor: 3.5-inch, Half-Height (HH)
- Firmware Version: 034A
- Country of Manufacture: Singapore
- Mounting rails integrated on drive
- Drive only — no additional cables or accessories included
Applications
The Seagate Cheetah FC series was widely deployed in enterprise SAN (Storage Area Network) environments during the late 1990s and early 2000s, when Fibre Channel became the dominant high-speed storage interconnect for mission-critical servers and data center storage arrays. These drives were common in Sun Microsystems workstations and servers — including the Sun Enterprise and Sun Fire lines — as well as in storage arrays from EMC, HP, and IBM. The Fibre Channel interface offered higher bandwidth and longer cable runs than parallel SCSI, making it well suited for centralized storage pools in data centers and high-availability clusters. Today, ST136403FC drives are primarily sought for maintaining legacy Sun and FC-based storage systems, as spare or replacement media in older enterprise arrays, and by collectors of late-1990s enterprise hardware.
This Seagate Cheetah ST136403FC 36.4GB Fibre Channel hard drive has been inspected, cleaned, and tested at our facility and is in very good working condition. The drive shows normal wear consistent with prior enterprise use. The label is intact and fully legible, the mounting rails are present, and the PCB appears clean with no visible damage. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Seagate |
Model: |
ST136403FC |
MPN: |
ST136403FC |
Part Number: |
SL7004-022 |
Secondary Model: |
SL7004-022 |
Sun Part Number: |
3900012-02 |
SKU: |
25162 |
Type: |
Hard Disk Drive (HDD) |
Series: |
Cheetah |
Storage Capacity: |
36.4 GB |
Interface: |
Fibre Channel |
Form Factor: |
3.5" Half-Height (HH) |
Firmware Version: |
034A |
Lot Number: |
A-01-0052-7 |
Condition: |
Used – Inspected and Tested |
Country/Region of Manufacture: |
Singapore |
Seller Notes: |
Drive only; no additional cables or accessories included. |
Compatible With: |
Sun workstations and servers, enterprise FC storage arrays |
Condition Notes: |
Seagate Cheetah ST136403FC 36.4GB FC HDD. Inspected, cleaned, and tested at our facility — in very good working condition. Normal enterprise wear. Label intact, mounting rails present, PCB clean. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
