Robbins Myers Dual Squirrel Cage Blower 208-230V 1PH 0.06HP 3350RPM 5502820

(No reviews yet) Write a Review
SKU:
30542
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
12.00 LBS
Shipping:
Calculated at Checkout
  • Robbins Myers dual squirrel cage blower – front-left three-quarter view showing both blower housings and motor on metal base plate
  • Robbins Myers dual squirrel cage blower – front-right three-quarter view showing full assembly and power lead cable with red connector
  • Robbins Myers squirrel cage blower – close-up of one impeller wheel showing forward-curved blades and center hub
  • Robbins Myers blower motor close-up – center motor body stamped EC217941 with run capacitor mounted below
  • Robbins Myers motor nameplate label – 208-230V 60/50Hz 0.06HP 1PH 3350/2770RPM IBM P/N 5502820 UL CSA
  • Robbins Myers blower power lead – close-up of 3-position red Molex-style electrical connector at cable end
$125.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Robbins Myers Dual Squirrel Cage Blower 208-230V 1PH 0.06HP 3350RPM 5502820

This Robbins Myers dual squirrel cage blower is a double-wheel centrifugal fan assembly built around a single centrally-mounted motor driving two squirrel cage impeller wheels — one on each side. Manufactured by Robbins Myers in Gallipolis, Ohio, this unit was produced to IBM specifications (IBM P/N 5502820) and mounts to a flat metal base plate for easy integration into equipment enclosures or HVAC systems.

Specifications & What's Included

  • Manufacturer: Robbins Myers (Gallipolis, Ohio, USA)
  • IBM Part Number: 5502820
  • Motor Model: EC217941
  • Secondary Part Number: KP-E26-B0T
  • Voltage: 208–230/220V AC
  • Frequency: 60/50Hz
  • Phase: Single Phase (1PH)
  • Motor Type: Type B
  • Horsepower: 0.06 HP
  • Speed: 3350/2770 RPM (dual-speed)
  • Current Draw: 0.36–0.32A / 0.40A
  • Run Capacitor: 3–4 MFD, 440V CONT (mounted on motor body)
  • Ambient Temperature Rating: 40°C
  • Blower Wheels: 2 (dual squirrel cage configuration)
  • Outlet Size: Two 5 x 2.4-inch discharge openings
  • Power Connection: 3-pin Molex-style connector on flying lead
  • Mounting: Integrated metal base plate with bolt holes
  • Certifications: UL Listed, CSA
  • Included: Blower assembly with base plate and power lead — no additional cables or hardware

Applications

Dual squirrel cage blowers of this type are used to move air through enclosed equipment cabinets, computer systems, and industrial housings where a compact, low-profile footprint is required alongside reasonable airflow capacity. The dual-wheel design places one impeller on each side of a central motor, producing airflow from both ends simultaneously — a configuration well suited to long, narrow equipment enclosures. Robbins Myers was a well-established U.S. manufacturer of fractional-horsepower motors and blower assemblies, and this unit was produced to IBM's specifications for use in IBM minicomputer and peripheral equipment of the 1970s–1990s era, such as System/36, System/38, and AS/400 equipment cabinets. These blowers also see continued use in HVAC fan coil units, electronics cooling enclosures, and industrial control panels where their compact dual-discharge design is an advantage. Replacements and spares for IBM-spec blowers like this remain in demand for legacy system maintenance.

Condition: Used
This Robbins Myers dual squirrel cage blower (IBM P/N 5502820) has been visually inspected and appears to be in good used condition. It has not been powered up or tested at our facility, but it was pulled from a working environment where it was previously in use. Both blower housings are intact and show normal wear consistent with prior service use. The metal base plate shows light surface oxidation typical of used industrial components. The 3-pin power connector appears intact and undamaged. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Robbins & Myers
Model:
EC217941
MPN:
5502820
Secondary Model:
KP-E26-B0T
SKU:
30542
Type:
Dual Squirrel Cage Blower
Voltage:
208-230/220V
Frequency:
60/50Hz
Phase:
Single Phase (1PH)
Horsepower:
0.06 HP
Speed (RPM):
3350/2770 RPM
Amperage:
0.36-0.32 / 0.40A
Capacitor:
3-4 MFD, 440V CONT
Ambient Temperature Rating:
40°C
Number of Blower Wheels:
2
Outlet Size:
5 x 2.4 inches (two outlets)
Connector Type:
3-pin Molex-style connector
Mounting:
Metal base plate
Country/Region of Manufacture:
United States (Gallipolis, Ohio)
Compatible With:
IBM systems (IBM P/N 5502820)
Certifications:
UL Listed, CSA
Seller Notes:
Blower assembly with metal base plate and power lead. No additional accessories included.
Condition Notes:
This Robbins Myers dual squirrel cage blower (P/N 5502820) has been visually inspected and appears in good used condition. Not powered or tested at our facility; pulled from a working environment. Please view photos and contact us with any questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose