Description
Ring King 7510X Quiet Print Printer Noise Reduction Enclosure Acoustic Case
The Ring King 7510X is a desktop acoustic enclosure designed to substantially reduce the noise generated by dot matrix impact printers. The unit features a smoked acrylic lift lid that allows access to the printer while containing sound, a foam-lined interior that absorbs impact noise, and a built-in side-mounted cooling fan to prevent heat buildup during extended print runs. Paper enters and exits through two horizontal slots on the rear panel, allowing continuous-feed or cut-sheet printing without opening the lid.
Specifications & What's Included
- Model: Ring King 7510X Series
- Brand: Ring King (Quiet Print® line)
- Internal dimensions: 28 x 15 x 7 inches
- External dimensions: 30.5 x 17 x 12 inches
- Lid: Smoked acrylic, hinged lift-open design
- Interior lining: Acoustic foam padding
- Ventilation: Built-in cooling fan (side-mounted)
- Paper access: Two horizontal rear slots for paper feed and exit
- Construction: Rigid cream/beige composite housing
- Country of manufacture: Made in U.S.A.
- Enclosure only — no printer included
Applications
Acoustic printer enclosures like the Ring King Quiet Print 7510X were developed in the 1980s in direct response to the noise produced by dot matrix impact printers, which were the dominant output technology in offices and data centers of that era. A typical 9-pin or 24-pin dot matrix printer running continuous-feed forms could generate 50–65 dB of noise — disruptive in open-plan offices. Enclosures like this one were sold alongside printers to comply with office noise standards and to make shared workspaces more tolerable. The 7510X accommodates printers up to 28 inches wide internally, covering most wide-carriage dot matrix printers of the period such as those used for wide-format reports, multi-part forms, and accounting printouts. Today these enclosures are still useful for anyone still running legacy dot matrix printers in industrial, warehouse, ticketing, or point-of-sale environments where the printers remain in service.
This Ring King 7510X Quiet Print acoustic printer enclosure is in good used condition. The housing is structurally sound with no significant warping or deformities. The interior foam lining shows average wear consistent with regular use. The exterior has the typical scuffs and scrapes you'd expect on a used unit of this age — the brand nameplate also shows some surface scratching, as visible in the photos. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Ring King |
Model: |
7510X |
MPN: |
7510X |
Type: |
Acoustic Printer Noise Reduction Enclosure |
SKU: |
14385 |
Compatible With: |
Dot matrix printers up to 28" wide (internal width) |
Internal Dimensions: |
28 x 15 x 7 inches |
External Dimensions: |
30.5 x 17 x 12 inches |
Lid Type: |
Smoked acrylic lift lid |
Features: |
Foam-lined interior, built-in cooling fan, paper feed slots |
Country/Region of Manufacture: |
United States |
Form Factor: |
Desktop |
Seller Notes: |
Enclosure only — no printer included. |
Condition Notes: |
This Ring King 7510X Quiet Print acoustic printer enclosure is in good used condition. Housing is structurally sound with no major deformities. Interior foam shows average wear. Exterior has typical scuffs and scrapes. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |