Description
PowerHouse ACCESS 10/36/C Forklift Battery Charger 36V 170A 480VAC Ecotec
The PowerHouse ACCESS 10/36/C is an industrial-grade forklift battery charger manufactured by Ecotec of Troy, Ohio under the PowerHouse brand. It is designed to charge 36-volt lead-acid (LA) forklift batteries from a 480VAC single-phase supply. The unit features a digital LCD display and a front-panel keypad (OK, ESC, EQ, FN, and arrow keys) for monitoring and configuring charge cycles, including an equalization mode. Part number CA36-1045-33 per the rating plate.
Specifications & What's Included
- Model: ACCESS 10/36/C
- Part Number: CA36-1045-33
- Input Voltage: 480VAC, 60Hz
- Input Current: 20A
- Output Voltage: 36V
- Output Current: 170A
- Number of Cells: 18
- Battery Type: LA (Lead Acid)
- Certifications: UL Listed, CSA (BC mark)
- Display: Digital LCD with keypad — OK, ESC, EQ, FN, and arrow keys
- Cooling: Dual internal fans on underside
- Output Connection: Anderson SB heavy-duty connector
- Includes: Output cable (red/black heavy-gauge leads with Anderson SB connector) and input power cable (heavy gray conduit, bare wire ends)
- Manufacturer: Ecotec, Troy, OH
Applications
The ACCESS 10/36/C is designed for charging 36-volt lead-acid traction batteries used in electric forklifts and other warehouse material-handling equipment — counterbalance forklifts, reach trucks, order pickers, and pallet jacks. The 480VAC input makes it suited for facilities with three-phase or high-voltage single-phase service, common in manufacturing plants and distribution centers. The equalization function (EQ mode) helps maintain battery health by periodically driving a controlled overcharge to balance cell voltages across the pack — an important feature in fleet applications where batteries may suffer uneven discharge. The PowerHouse ACCESS series was a widely deployed line of opportunity chargers produced by Ecotec; units in this series see continued use in warehouses and fleet maintenance operations that maintain legacy 36V forklift fleets.
This PowerHouse ACCESS 10/36/C Forklift Battery Charger has been inspected and appears to be in good condition. It was pulled from a working environment where it was previously in use. The housing shows general wear consistent with industrial use — scuffing and grime on the outer case and underside, with the bottom plate showing surface marks typical of floor-mounted charger service. The front panel label and digital display are intact and legible. Both cables are present: the Anderson SB output cable (red and black heavy-gauge leads) and the input power cable with bare wire ends. The dual cooling fans on the underside are present and unobstructed. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
PowerHouse |
Model: |
ACCESS 10/36/C |
MPN: |
CA36-1045-33 |
Type: |
Industrial Forklift Battery Charger |
SKU: |
53174 |
Input Voltage: |
480VAC, 60Hz |
Input Current: |
20A |
Output Voltage: |
36V |
Output Current: |
170A |
Number of Cells: |
18 |
Battery Type: |
LA (Lead Acid) |
Phase: |
Single Phase |
Certifications: |
UL Listed, BC (CSA) |
Manufacturer: |
Ecotec, Troy OH |
Output Connector: |
Anderson SB connector (heavy duty) |
Form Factor: |
Floor / Benchtop |
Cooling: |
Dual internal cooling fans |
Display: |
Digital LCD display with keypad (OK, ESC, EQ, FN, arrow keys) |
Seller Notes: |
Includes output cable with Anderson SB connector and input power cable with bare wire ends. |
Country/Region of Manufacture: |
United States |
Condition: |
Used – Pulled from Working Environment |
Condition Notes: |
PowerHouse ACCESS 10/36/C Forklift Battery Charger pulled from a working environment. Inspected and in good condition with typical industrial wear on housing. Both cables included (Anderson SB output, bare-end input). Digital display intact. |
