Description
Power Man HP-A1463F5 100W ATX Power Supply 100-127V 200-240V Dual Voltage
Used 100W ATX power supply unit with dual voltage input support. Provides regulated DC power to legacy and compact ATX desktop systems.
Specifications & What's Included
- Model: HP-A1463F5 (Secondary: MHP100800)
- Power Output: 100W Max
- AC Input: 100-127V / 200-240V, 47-63Hz
- DC Outputs: +5V @ 15A, +12V @ 3A, +3.3V @ 12A, -5V @ 0.3A, -12V @ 0.3A, +5VSB @ 1A
- Connectors: 20-pin ATX main, 4-pin Molex, floppy
- Form Factor: ATX Desktop
- Unit only — no cables or accessories included
Applications
Used in compact and legacy ATX desktop builds where space or power budget constraints limit larger supplies. Supports older motherboards and systems built through the early 2000s. Common in small-form-factor builds, retro PC projects, and replacement applications where 100W capacity is sufficient.
Please note: We may have multiple units of this item in stock. The unit you receive may vary slightly from the one shown in the photos. All units are functionally equivalent and inspected to the same standard.
This Power Man HP-A1463F5 100W ATX Power Supply has been tested at our facility and is in good working order. The unit shows typical cosmetic wear consistent with prior use, including light scuffing on the metal chassis. All output connectors and cabling appear intact and undamaged. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Power Man |
Model: |
HP-A1463F5 |
MPN: |
HP-A1463F5 |
Secondary Model: |
MHP100800 |
SKU: |
19027 |
Condition: |
Used – Inspected and Tested |
Seller Notes: |
Unit only — no accessories included. |
Form Factor: |
ATX Desktop |
Power Output: |
100W Max |
AC Input Voltage: |
100-127V / 200-240V |
AC Input Current: |
4A @ 100-127V; 2A @ 200-240V |
AC Input Frequency: |
47-63Hz |
DC Output +5V: |
+5V @ 15A |
DC Output +12V: |
+12V @ 3A |
DC Output +3.3V: |
+3.3V @ 12A |
DC Output -5V: |
-5V @ 0.3A |
DC Output -12V: |
-12V @ 0.3A |
DC Output +5VSB: |
+5VSB @ 1A |
Connector Types: |
20-pin ATX main, 4-pin Molex peripheral, floppy |
Country of Manufacture: |
China |
Certifications: |
FCC, UL, CE, TUV |
Compatible With: |
ATX desktop computers, legacy PC builds |
Standards: |
ATX form factor |
Switch: |
Hard power switch on rear panel |
Condition Notes: |
Power Man HP-A1463F5 100W ATX Power Supply. Tested and in working order. Shows typical cosmetic wear. All connectors intact. Please view photos and contact us with any questions. |